|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
02-14-2015, 10:32 PM
|
#4 |
|
Registered User
Join Date: May 2004
Location: Minnesota
Posts: 4,621
|
Re: 93 chevy crank but won't start
It all depends on how your meter displays readings.
If it is a digital meter, 3.5 may mean 3.5K which is 3500 ohms which is very close to what it should read. It you are using an analog meter and it means 70,000 ohms, that would make the system dump in a lot of fuel. Check and see, if you have someone turn the key on, without cranking the engine, if any fuel come out of the injectors. No fuel should come out.
__________________
For those of you that are wondering why you are not getting replies to your thread: Did you give the model, year, engine, fuel system type, and transmission information? If it is modified from what came stock from the factory, let us know that too. |
|
|
| Bookmarks |
|
|
Threaded Mode