Porterbuilt dropmember motor mount not lining up. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

88CopperTop · 02-03-2015, 01:07 PM

So we have a 56 in the shop we're putting together. Full porterbuilt front airbag setup. The motor mount location on the sub frame isn't lining up with the motor mount location on the dropmember. Its about a 1/4" off on the passenger side and a little more than that on the drivers side. Is this just welded wrong or am i miss something here? The whole front end is bolted together, with brakes and tires mounted also, so i dont have any room for adjustments.

88CopperTop · 02-03-2015, 01:20 PM

Just realized i posted to the wrong location.... I got an email from pb also. Can we delete this?

ChuckDriver · 02-16-2015, 06:35 PM

Mine is off by 1/4in on the driver side.

**lolife99** · 02-16-2015, 06:38 PM

Can you tell us if you got your problem solved?

ChuckDriver · 02-16-2015, 08:05 PM

Not yet. Talked with Nate and he offered to send me another upper mount if I damage it when I remove it. I will re-weld it in the correct spot, using the motor mount plates to locate it.

88CopperTop · 02-16-2015, 09:56 PM

Same here, he sent new mounts for us to weld on. Apparently we had one of the first dozen or so kits made and some things were off.

02-03-2015, 01:07 PM	#1
88CopperTop Registered User Join Date: Jan 2015 Location: Valdosta Ga Posts: 3	Porterbuilt dropmember motor mount not lining up. So we have a 56 in the shop we're putting together. Full porterbuilt front airbag setup. The motor mount location on the sub frame isn't lining up with the motor mount location on the dropmember. Its about a 1/4" off on the passenger side and a little more than that on the drivers side. Is this just welded wrong or am i miss something here? The whole front end is bolted together, with brakes and tires mounted also, so i dont have any room for adjustments. Attached Images

02-03-2015, 01:20 PM	#2
88CopperTop Registered User Join Date: Jan 2015 Location: Valdosta Ga Posts: 3	Re: Porterbuilt dropmember motor mount not lining up. Just realized i posted to the wrong location.... I got an email from pb also. Can we delete this?

02-16-2015, 06:35 PM	#3
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: Porterbuilt dropmember motor mount not lining up. Mine is off by 1/4in on the driver side. __________________ JJ My 1957 build: http://67-72chevytrucks.com/vboard/s...d.php?t=334552 http://www.trifive.com/forums/showthread.php?t=22037 Instagram - Chuckdriver57

02-16-2015, 06:38 PM	#4
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,716	Re: Porterbuilt dropmember motor mount not lining up. Can you tell us if you got your problem solved? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

02-16-2015, 08:05 PM	#5
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: Porterbuilt dropmember motor mount not lining up. Not yet. Talked with Nate and he offered to send me another upper mount if I damage it when I remove it. I will re-weld it in the correct spot, using the motor mount plates to locate it. __________________ JJ My 1957 build: http://67-72chevytrucks.com/vboard/s...d.php?t=334552 http://www.trifive.com/forums/showthread.php?t=22037 Instagram - Chuckdriver57

02-16-2015, 09:56 PM	#6
88CopperTop Registered User Join Date: Jan 2015 Location: Valdosta Ga Posts: 3	Re: Porterbuilt dropmember motor mount not lining up. Same here, he sent new mounts for us to weld on. Apparently we had one of the first dozen or so kits made and some things were off.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.