Help me identify these parts

[LDO]

Ok, these are the parts that were on my firewall when I removed the steering column on my 66.

Not sure if these are correct for my year but if you could tell me what they came off and the correct name so I can get replacement parts OR the correct part for my year truck.

I am using an ididit column for a 66 with manual shift on the floor.

thanks!

[pimpston65]

Originally Posted by LDO

Ok, these are the parts that were on my firewall when I removed the steering column on my 66.

Not sure if these are correct for my year but if you could tell me what they came off and the correct name so I can get replacement parts OR the correct part for my year truck.

I am using an ididit column for a 66 with manual shift on the floor.

thanks!

they are correct. the metal plate covers the odd shape thing for the through hole, not sure bout the smaller round thing. i think they are from 60-66 all the same... the rubber foam thing in the middle pic is repop'd, i dont thing the metal cover is so reuse it...

[Captainfab]

The rubber piece on far right and bottom, is not original. The foam seal piece is sandwiched between the metal plate and the firewall to seal the OD of the column to the firewall. The plate attaches to the ribs inside the firewall with 4 sheetmetal screws.