WTB 350 engine for 93 Chevy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Spectre · 01-30-2004, 03:13 PM

I need a decent engine to go into the truck while I rebuild the one in there..

Anyone have anything?

jeffspower · 01-30-2004, 10:07 PM

I have a '94 350 with 98,000 miles. The truck had been in a front end collision pushing the radiator back into the front of the motor. It ran great, but kept throwing the belt off. At first I thought it was a bent pulley, but ended up the crank snout was sprung. I put in another crank & all new seals & gaskets except the head gaskets. It has all the tin & TBI intake installed, along with the balancer & flywheel. Cleaned up & painted.

$550- Jeff

phantom dually · 01-30-2004, 11:27 PM

Why wouldnt you just buy another block and rebuild it while keeping your truck running?

Spectre · 02-01-2004, 02:23 PM

550? I'll keep that in mind..

As for not just buying another block, it's an idea, but I want another engine because when everything is said and done I want to put the 350 engine and tranny that's left over into my Nissan Hardbody.

01-30-2004, 03:13 PM	#1
Spectre Registered User Join Date: Mar 2003 Location: Riverside, Ca Posts: 113	WTB 350 engine for 93 Chevy I need a decent engine to go into the truck while I rebuild the one in there.. Anyone have anything? __________________ 93 Chevy C1500 Sport Edition 351, 5 Speed - DOug Thorley headers, 95 GMC 305 Automatic 91 Nissan Hardbody 4WD 3" BL lift - 33x12.50's 87 Ford Bronco 8" SL 3" BL 18x39.5x15" Supper Swamper Boggers

01-30-2004, 11:27 PM	#3
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Why wouldnt you just buy another block and rebuild it while keeping your truck running? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-01-2004, 02:23 PM	#4
Spectre Registered User Join Date: Mar 2003 Location: Riverside, Ca Posts: 113	550? I'll keep that in mind.. As for not just buying another block, it's an idea, but I want another engine because when everything is said and done I want to put the 350 engine and tranny that's left over into my Nissan Hardbody. __________________ 93 Chevy C1500 Sport Edition 351, 5 Speed - DOug Thorley headers, 95 GMC 305 Automatic 91 Nissan Hardbody 4WD 3" BL lift - 33x12.50's 87 Ford Bronco 8" SL 3" BL 18x39.5x15" Supper Swamper Boggers

01-30-2004, 10:07 PM	#2
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	I have a '94 350 with 98,000 miles. The truck had been in a front end collision pushing the radiator back into the front of the motor. It ran great, but kept throwing the belt off. At first I thought it was a bent pulley, but ended up the crank snout was sprung. I put in another crank & all new seals & gaskets except the head gaskets. It has all the tin & TBI intake installed, along with the balancer & flywheel. Cleaned up & painted. $550- Jeff



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.