OK WTB 4x4 swap parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tyler_lay · 02-17-2015, 10:55 PM

what to buy parts to swap my long horn to 4x4 i have axle and springs i need shackles and hangers as ps box and arm thanks

offroden · 02-18-2015, 09:03 PM

Quote:

Originally Posted by tyler_lay

what to buy parts to swap my long horn to 4x4 i have axle and springs i need shackles and hangers as ps box and arm thanks

I think I have them off my blazer. Front only?

tyler_lay · 02-18-2015, 09:37 PM

thank i have a set here in town ill let you know if i still need them

**Ironhorse** · 02-19-2015, 12:25 AM

I have a 4x4 P/S gear box with the pitman arm still installed. Have not used it myself but seems to have good seals with no leaks and the pitman arm responds well when the shaft is turned. One broken mount bolt but should be easy to drill and easy out. Also has the original high pressure and low pressure return line. Asking $60 plus shipping, let me know and I can post pics.

tyler_lay · 02-19-2015, 12:28 AM

plz do

DLTruck1973 · 02-19-2015, 02:39 AM

I have every piece you will need for this swap.

Front spring/core support hangers are $40.00 each
Front bump stops with brackets are $20.00 each.
Front spring hangers (rear position, cast piece that shackles bolt to) $20.00 each
Front spring shackles with bolts $12.50 each
Engine cross member $75.00
Trans/transfer case cross member $65.00
Small transfer case mount (bolts to frame) $45.00 complete with rubber and bolts.
Rear spring hanger (front position) $40.00 each
Rear bump stops with brackets $20.00 each
Rear spring hanger (rear position) is $45.00 each

PS pump with brackets, hoses, gear box and steering arm $125.00.

All prices plus shipping.

Let me know. I have nice clean parts.

Thank you,
Thomas

**Ironhorse** · 02-19-2015, 01:01 PM

tyler, pics of the gear box with the 4x4 pitman arm attached. One broken mount bolt should be easy to drill and easy out. Seems all seals are good, am including the original press. and return hose merely for comparision for when buying new to match correctly. I would not use these as new hoses aren't that much $$. $60 plus shipping as mentioned. I am in Kansas about 30 miles south of Wichita, not sure where Ramona, Ok is but using UPS for shipping should not be too bad. Let me know if interested and I can figure a shipping quote. Thanks,

engairuph · 02-19-2015, 11:48 PM

I have a 4x4 sway bar complete for $50 plus shipping

tyler_lay · 02-20-2015, 12:22 AM

Ironhores I'll be up ur way Sunday I'll take the box what's the address and a good number

**Ironhorse** · 02-20-2015, 08:16 AM

tyler, will be out of town Sunday. Sending you a PM.

**Ironhorse** · 02-23-2015, 05:24 PM

tyler, still interested? Never heard from you via PM. ??

02-17-2015, 10:55 PM	#1
tyler_lay Registered User Join Date: Dec 2013 Location: ramona ok Posts: 295	WTB 4x4 swap parts what to buy parts to swap my long horn to 4x4 i have axle and springs i need shackles and hangers as ps box and arm thanks

02-18-2015, 09:37 PM	#3
tyler_lay Registered User Join Date: Dec 2013 Location: ramona ok Posts: 295	Re: WTB 4x4 swap parts thank i have a set here in town ill let you know if i still need them

02-19-2015, 12:25 AM	#4
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: WTB 4x4 swap parts I have a 4x4 P/S gear box with the pitman arm still installed. Have not used it myself but seems to have good seals with no leaks and the pitman arm responds well when the shaft is turned. One broken mount bolt but should be easy to drill and easy out. Also has the original high pressure and low pressure return line. Asking $60 plus shipping, let me know and I can post pics. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

02-19-2015, 12:28 AM	#5
tyler_lay Registered User Join Date: Dec 2013 Location: ramona ok Posts: 295	Re: WTB 4x4 swap parts plz do

02-19-2015, 02:39 AM	#6
DLTruck1973 Registered User Join Date: Jan 2015 Location: Junction City OR Posts: 1,758	Re: WTB 4x4 swap parts I have every piece you will need for this swap. Front spring/core support hangers are $40.00 each Front bump stops with brackets are $20.00 each. Front spring hangers (rear position, cast piece that shackles bolt to) $20.00 each Front spring shackles with bolts $12.50 each Engine cross member $75.00 Trans/transfer case cross member $65.00 Small transfer case mount (bolts to frame) $45.00 complete with rubber and bolts. Rear spring hanger (front position) $40.00 each Rear bump stops with brackets $20.00 each Rear spring hanger (rear position) is $45.00 each PS pump with brackets, hoses, gear box and steering arm $125.00. All prices plus shipping. Let me know. I have nice clean parts. Thank you, Thomas

02-19-2015, 01:01 PM	#7
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: WTB 4x4 swap parts tyler, pics of the gear box with the 4x4 pitman arm attached. One broken mount bolt should be easy to drill and easy out. Seems all seals are good, am including the original press. and return hose merely for comparision for when buying new to match correctly. I would not use these as new hoses aren't that much $$. $60 plus shipping as mentioned. I am in Kansas about 30 miles south of Wichita, not sure where Ramona, Ok is but using UPS for shipping should not be too bad. Let me know if interested and I can figure a shipping quote. Thanks, Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

02-19-2015, 11:48 PM	#8
engairuph Registered User Join Date: Oct 2014 Location: D'Iberville, MS Posts: 447	Re: WTB 4x4 swap parts I have a 4x4 sway bar complete for $50 plus shipping __________________ Ralph L. Jasper 69 4x4 Suburban PTO winch(NAVY) 13 GMC Ext cab 12 Ford Fusion SE(wife) MAI Interior shop

02-20-2015, 12:22 AM	#9
tyler_lay Registered User Join Date: Dec 2013 Location: ramona ok Posts: 295	Re: WTB 4x4 swap parts Ironhores I'll be up ur way Sunday I'll take the box what's the address and a good number

02-20-2015, 08:16 AM	#10
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: WTB 4x4 swap parts tyler, will be out of town Sunday. Sending you a PM. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

02-23-2015, 05:24 PM	#11
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: WTB 4x4 swap parts tyler, still interested? Never heard from you via PM. ?? __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.