Building my c10 since I was 15 and in need of some advice - The 1947 - Present Chevrolet & GMC Truck Message Board Network

benw88 · 02-24-2015, 08:06 PM

Hello fellas,

I am the proud owner of a 68 c10 stepside with a SBC 350 and a muncie 4-spd.
I have access to both a edelbrock performer intake and a stock z28 aluminum intake manifold. I also have headers a comp cam XE-274 and a edelbrock 600cfm electric choke carburator. Any suggestions on which intake to use would be greatly appreciated.

Ben

mud.man.rj · 02-24-2015, 08:11 PM

I don't think you will see a huge difference in the intake choice but I would use the Eddy, are they both setup for the same style carb, a lot of the Z intakes take only a factory Gm carb while the Edel is most common for their carb base but can come in the Gm style also. Any pic's of intakes.

Mike C · 02-24-2015, 08:13 PM

Yes, pics please. The Z/28 intake is more comparable to the Performer RPM and should be a standard square bore pattern.

With stock cam and Edelbrock Carb, the Performer intake should/would be your best choice.

benw88 · 02-24-2015, 08:18 PM

I will post some pics once I get home, both intakes are set up for the edelbrock carb.

**James Pierce** · 02-24-2015, 08:27 PM

Buy a performer, and put the z28 intake on Ebay. You will be $ ahead.

02-24-2015, 08:06 PM	#1
benw88 Registered User Join Date: Feb 2015 Location: Long Beach, CA Posts: 44	Building my c10 since I was 15 and in need of some advice Hello fellas, I am the proud owner of a 68 c10 stepside with a SBC 350 and a muncie 4-spd. I have access to both a edelbrock performer intake and a stock z28 aluminum intake manifold. I also have headers a comp cam XE-274 and a edelbrock 600cfm electric choke carburator. Any suggestions on which intake to use would be greatly appreciated. Ben

02-24-2015, 08:11 PM	#2
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: Building my c10 since I was 15 and in need of some advice I don't think you will see a huge difference in the intake choice but I would use the Eddy, are they both setup for the same style carb, a lot of the Z intakes take only a factory Gm carb while the Edel is most common for their carb base but can come in the Gm style also. Any pic's of intakes. __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.

02-24-2015, 08:13 PM	#3
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,727	Re: Building my c10 since I was 15 and in need of some advice Yes, pics please. The Z/28 intake is more comparable to the Performer RPM and should be a standard square bore pattern. With stock cam and Edelbrock Carb, the Performer intake should/would be your best choice. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

02-24-2015, 08:18 PM	#4
benw88 Registered User Join Date: Feb 2015 Location: Long Beach, CA Posts: 44	Re: Building my c10 since I was 15 and in need of some advice I will post some pics once I get home, both intakes are set up for the edelbrock carb.

02-24-2015, 08:27 PM	#5
James Pierce Active Member Join Date: Feb 2009 Location: Cle Elum, Washington Posts: 164	Re: Building my c10 since I was 15 and in need of some advice Buy a performer, and put the z28 intake on Ebay. You will be $ ahead. __________________ cascadeheavychevy 67 C10 327 4speed 69 C20 350 4WD 4speed 69 C20 350 4WD 4speed 69 C20 350 4 soeed 69 C20 CST 350 Auto 70 C10 307 4speed 71 GMC Supr 350 Auto 70 C10 350 Auto 67 CST 327 Auto



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.