rubber floor mat - The 1947 - Present Chevrolet & GMC Truck Message Board Network

davecarney2 · 02-25-2015, 03:21 PM

If I did this twice please delete.

the Trans tunnel on my truck had to be raised. Being that the stock replacement rubber floor mat will no longer fit does anyone know where I might get some material I can mold with a heat gun to give that somewhat stock appearance?

OrrieG · 02-25-2015, 04:04 PM

If you are near a real farm and tack store they have different types of mats for trailers that might work. I used to get some of the ribbed type when using the truck for camping and hunting, but my cab has a flat floor. I also got some heavy density horse trailer mat to use for body and similar mounts.

mr48chev · 02-25-2015, 07:36 PM

look at a 60/66 and a 67/72 or two and see if the factory hump is similar your fabricated hump. That might let you get the shape you need in the molded mat to fit good and then you could trim the edges.

I was also thinking a flat floor runner about 4 ft wide that you can probably have a supplier cut the right number of feet off the roll but you would have to contend with working around the hump. http://www.americanfloormats.com/cor...r-runner-mats/

02-25-2015, 03:21 PM	#1
davecarney2 Registered User Join Date: Jun 2012 Location: Catawba NC Posts: 230	rubber floor mat If I did this twice please delete. the Trans tunnel on my truck had to be raised. Being that the stock replacement rubber floor mat will no longer fit does anyone know where I might get some material I can mold with a heat gun to give that somewhat stock appearance? __________________ Bagged 1959 GMC 1969 C-30 dump My 59 build. http://67-72chevytrucks.com/vboard/s...d.php?t=592878

02-25-2015, 04:04 PM	#2
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: rubber floor mat If you are near a real farm and tack store they have different types of mats for trailers that might work. I used to get some of the ribbed type when using the truck for camping and hunting, but my cab has a flat floor. I also got some heavy density horse trailer mat to use for body and similar mounts. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

02-25-2015, 07:36 PM	#3
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,426	Re: rubber floor mat look at a 60/66 and a 67/72 or two and see if the factory hump is similar your fabricated hump. That might let you get the shape you need in the molded mat to fit good and then you could trim the edges. I was also thinking a flat floor runner about 4 ft wide that you can probably have a supplier cut the right number of feet off the roll but you would have to contend with working around the hump. http://www.americanfloormats.com/cor...r-runner-mats/ __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.