Drop Control Arms that narrow the track of 3rd gen C10? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Richs'55 · 02-28-2015, 09:52 AM

Anybody make a drop control arm set for the front of the C-10 that would narrow the track of the vehicle also, even if it is only an 1" or 2 at the most?

And discuss any issues as far as tire rubbing frame if any.

I need to narrow the track just a bit for fender clearance just a bit. I have thought about wheel backspacing and am real close, just would like a bit more just for good measure.

SCOTI · 02-28-2015, 10:07 AM

What's your definition of a "3rd Gen" C10?

Richs'55 · 02-28-2015, 10:10 AM

1973 to 1987. I have an '81 Chevy frame that the '55 is sitting on. So suspension questions will all be relative to the '81 frame.
Thanks

SCOTI · 02-28-2015, 10:16 AM

Quote:

Originally Posted by Richs'55

I have an '81 Chevy frame that the '55 is sitting on. So suspension questions will all be relative to the '81 frame.
Thanks

CPP sells a drop spindle that helps reduce track width & narrowed a-arms can help even more. Try Porterbuilt or Michigan Metal Works for narrowed arms.

02-28-2015, 09:52 AM	#1
Richs'55 Registered User Join Date: Aug 2014 Location: Fort Dodge, Iowa Posts: 120	Drop Control Arms that narrow the track of 3rd gen C10? Anybody make a drop control arm set for the front of the C-10 that would narrow the track of the vehicle also, even if it is only an 1" or 2 at the most? And discuss any issues as far as tire rubbing frame if any. I need to narrow the track just a bit for fender clearance just a bit. I have thought about wheel backspacing and am real close, just would like a bit more just for good measure.

02-28-2015, 10:07 AM	#2
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	Re: Drop Control Arms that narrow the track of 3rd gen C10? What's your definition of a "3rd Gen" C10? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

02-28-2015, 10:10 AM	#3
Richs'55 Registered User Join Date: Aug 2014 Location: Fort Dodge, Iowa Posts: 120	Re: Drop Control Arms that narrow the track of 3rd gen C10? 1973 to 1987. I have an '81 Chevy frame that the '55 is sitting on. So suspension questions will all be relative to the '81 frame. Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.