OK 58 1 ton truck chassis/drivetrain - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wahl4m · 03-01-2015, 12:56 PM

would take pto /if its a 2 way ?

mrf1002u · 03-01-2015, 04:52 PM

Quote:

Originally Posted by mrf1002u

Not something I really need as my one ton isn't a dump, but could be a novelty later down the road if it is cheap enough. How much to 32097 and is it all there? Out put flange and whatever?

Larry W.

I re-read the thread and you offered the PTO to somebody for $50.00. If the shipping is decent, I'd take it for that price. Let me know on the shipping. I'm assuming it can just come UPS or whatever.

Larry W.

RockTonka · 03-02-2015, 10:55 PM

Quote:

Originally Posted by mrf1002u

Not something I really need as my one ton isn't a dump, but could be a novelty later down the road if it is cheap enough. How much to 32097 and is it all there? Out put flange and whatever?

Larry W.

Yep, all there. Output joint, engage/disengage lever.

Quote:

Originally Posted by mrf1002u

P.S. Is there a lever or shifter of some kind to engage and disengage? Never had one before.

Yep, see pic.

Quote:

Originally Posted by wahl4m

would take pto /if its a 2 way ?

Nope, one way.

Quote:

Originally Posted by mrf1002u

I re-read the thread and you offered the PTO to somebody for $50.00. If the shipping is decent, I'd take it for that price. Let me know on the shipping. I'm assuming it can just come UPS or whatever.

Larry W.

Looks like about $30 on shipping. So, $80.00 shipped to you.

RockTonka · 03-02-2015, 10:59 PM

Oops, pics...

mrf1002u · 03-02-2015, 11:18 PM

Quote:

Originally Posted by RockTonka

Yep, all there. Output joint, engage/disengage lever.

Yep, see pic.

Nope, one way.

Looks like about $30 on shipping. So, $80.00 shipped to you.

So one way unit, but does the shaft come out to the rear of the truck?

Larry W.

RockTonka · 03-02-2015, 11:43 PM

Yes it does.

mrf1002u · 03-02-2015, 11:51 PM

Quote:

Originally Posted by mrf1002u

So one way unit, but does the shaft come out to the rear of the truck?

Larry W.

Send me payment info and I'll get it out to you. You wanted checks right. Just for later reference, was it controlled by a lever in the cab, or a cable or what?

Larry W.

RockTonka · 03-02-2015, 11:53 PM

You can see the shaft going from the PTO back to the hydraulic pump/valve in this early pic of the truck...

RockTonka · 03-03-2015, 12:01 AM

Quote:

Originally Posted by mrf1002u

Send me payment info and I'll get it out to you. You wanted checks right. Just for later reference, was it controlled by a lever in the cab, or a cable or what?

Larry W.

PM sent, Thank you.

Cables controlled both the PTO and pump...

mrf1002u · 03-03-2015, 12:34 AM

Thanks

mrf1002u · 03-07-2015, 09:18 AM

Quote:

Originally Posted by mrf1002u

Send me payment info and I'll get it out to you. You wanted checks right. Just for later reference, was it controlled by a lever in the cab, or a cable or what?

Larry W.

Just checking to see if my check arrived for the PTO?

Larry W.

RockTonka · 03-10-2015, 12:25 AM

Got it today Larry. PM sent. PTO heading your way tomorrow!

Thanks!

03-01-2015, 12:56 PM	#76
wahl4m Registered User Join Date: Jan 2002 Location: norwalk,iowa,usa Posts: 920	Re: 58 1 ton truck chassis/drivetrain would take pto /if its a 2 way ?

03-02-2015, 10:59 PM	#79
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,524	Re: 58 1 ton truck chassis/drivetrain Oops, pics... Attached Images __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

03-02-2015, 11:43 PM	#81
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,524	Re: 58 1 ton truck chassis/drivetrain Yes it does. __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

03-02-2015, 11:53 PM	#83
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,524	Re: 58 1 ton truck chassis/drivetrain You can see the shaft going from the PTO back to the hydraulic pump/valve in this early pic of the truck... Attached Images __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

03-03-2015, 12:34 AM	#85
mrf1002u Registered User Join Date: Feb 2015 Location: Yulee, Florida Posts: 142	Re: 58 1 ton truck chassis/drivetrain Thanks

03-10-2015, 12:25 AM	#87
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,524	Re: 58 1 ton truck chassis/drivetrain Got it today Larry. PM sent. PTO heading your way tomorrow! Thanks! __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.