PA Carpet strips - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1rippen6** · 03-08-2015, 08:59 PM

Carpet strips rear one has pitting on both ends and front one has a couple of dents, bowed bad, and the edge is wavy. Dents are hard to see please see pictures and let me know if you need anymore. I think a chrome shop will be able to fix this but of coarse it will be extra money. I WILL GIVE GARY 70 JIMMY A COUPLE OF DAYS FOR FIRST REFUSAL. 120 plus shipping. SOLD

**1rippen6** · 03-08-2015, 09:01 PM

more pics

Dale99 · 03-09-2015, 09:01 AM

I guess I have two rears.

I would like them if the other user passes as these were on my WTB list.

**1rippen6** · 03-09-2015, 09:37 AM

Quote:

Originally Posted by Dale99

I guess I have two rears.

I would like them if the other user passes as these were on my WTB list.

Sounds good I will give him until Wednesday and then they are yours.

**1rippen6** · 03-09-2015, 10:09 AM

Quote:

Originally Posted by Dale99

I guess I have two rears.

I would like them if the other user passes as these were on my WTB list.

Dale99 I looked at your wanted list what is #1 the vertical strip that holds the seal for the tailgate? If so I have a set for sale will move the post to the top.

**1rippen6** · 03-09-2015, 10:43 AM

Dale99 I have #4 also might not be any better than yours I moved it to the top so you can check it out.

Dale99 · 03-09-2015, 12:00 PM

ok, will go take a look

smbrouss70 · 03-09-2015, 03:45 PM

Can you get the angle of the bend on the front carpet strip for me? I have a good rear, and I think I will make a front one. Thanks.

**1rippen6** · 03-09-2015, 06:26 PM

Quote:

Originally Posted by smbrouss70

Can you get the angle of the bend on the front carpet strip for me? I have a good rear, and I think I will make a front one. Thanks.

I know another member tried to have a set made and was not very happy with them but you never know here you go

**1rippen6** · 03-09-2015, 06:26 PM

It actually reads about 43.5 but probably should be 45

**IronCanine** · 03-09-2015, 07:14 PM

Quote:

Originally Posted by Dale99

I guess I have two rears.

I've seen them with two flats, one of each, and two clamp style...I think if you're Blazer is 70 or earlier, there's a strong possibility it's two flats, if it's a 72 there's a greater possibility that you've got two clamp style...this is only a general observation.

Quote:

Originally Posted by smbrouss70

Can you get the angle of the bend on the front carpet strip for me? I have a good rear, and I think I will make a front one. Thanks.

I had a set made by copying one I had on loan from 1Rippen. The hardest part is the tiny back bend...it's a two angle piece. The other hard part is the counter sink for the screws. Hopefully the chrome is bright enough to hide those differences.

I would have preferred to find two good ones to re-finish. A good set is hard to come by.

**1rippen6** · 03-09-2015, 07:55 PM

Thanks for the info IronCanine I wasn't going to throw you under the bus LOL

**Gary 70 Jimmy** · 03-09-2015, 08:01 PM

I will pass them to some one else the ones I have might be better then yours thanks for posting them for me.

**1rippen6** · 03-09-2015, 08:07 PM

Quote:

Originally Posted by Gary 70 Jimmy

I will pass them to some one else the ones I have might be better then yours thanks for posting them for me.

Gary 70 Jimmy thanks for letting me know Dale99 your up

**1rippen6** · 03-09-2015, 08:11 PM

Quote:

Originally Posted by Dale99

I guess I have two rears.

I would like them if the other user passes as these were on my WTB list.

Send me your zip and I will get you a shipping quote

Dale99 · 03-09-2015, 08:50 PM

Sounds good, thanks Gary

sending pm rippen

Dale99 · 03-09-2015, 08:52 PM

Quote:

Originally Posted by IronCanine

I've seen them with two flats, one of each, and two clamp style...I think if you're Blazer is 70 or earlier, there's a strong possibility it's two flats, if it's a 72 there's a greater possibility that you've got two clamp style...this is only a general observation.

Thanks for the info. Mine is a 72, and yes it would be two of the clamp style.

**1rippen6** · 03-09-2015, 09:12 PM

Quote:

Originally Posted by Dale99

Sounds good, thanks Gary

sending pm rippen

Pm returned with shipping quote

Dale99 · 03-10-2015, 10:49 AM

funds sent

03-08-2015, 09:01 PM	#2
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,715	Re: Carpet strips more pics Attached Images

03-09-2015, 09:01 AM	#3
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Carpet strips I guess I have two rears. I would like them if the other user passes as these were on my WTB list. __________________ 2008 Sierra k3500 LMM 1994 s10 blazer 4x4 1991 Camaro Vert Rusted in Half RIP 1972 Jimmy 4x4 L05,4L60E,np205http://67-72chevytrucks.com/vboard/s...d.php?t=546364 1967 C10 L6/3tree(dads truck)

03-09-2015, 10:43 AM	#6
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,715	Re: Carpet strips Dale99 I have #4 also might not be any better than yours I moved it to the top so you can check it out.

03-09-2015, 12:00 PM	#7
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Carpet strips ok, will go take a look

03-09-2015, 03:45 PM	#8
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,782	Re: Carpet strips Can you get the angle of the bend on the front carpet strip for me? I have a good rear, and I think I will make a front one. Thanks. __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

03-08-2015, 08:59 PM	#1
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,715	Carpet strips Carpet strips rear one has pitting on both ends and front one has a couple of dents, bowed bad, and the edge is wavy. Dents are hard to see please see pictures and let me know if you need anymore. I think a chrome shop will be able to fix this but of coarse it will be extra money. I WILL GIVE GARY 70 JIMMY A COUPLE OF DAYS FOR FIRST REFUSAL. 120 plus shipping. SOLD Attached Images Last edited by 1rippen6; 03-10-2015 at 05:43 PM.

03-09-2015, 06:26 PM	#10
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,715	Re: Carpet strips It actually reads about 43.5 but probably should be 45

03-09-2015, 07:55 PM	#12
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,715	Re: Carpet strips Thanks for the info IronCanine I wasn't going to throw you under the bus LOL

03-09-2015, 08:01 PM	#13
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: Carpet strips I will pass them to some one else the ones I have might be better then yours thanks for posting them for me. __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

03-09-2015, 08:50 PM	#16
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Carpet strips Sounds good, thanks Gary sending pm rippen

03-10-2015, 10:49 AM	#19
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Carpet strips funds sent



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.