Betsie - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jy829 · 03-10-2015, 06:35 PM

Here is My 1966 c10. I hope to do a frame off restomod someday with a turbocharged 6.0l ls and a 4l60enor 4l80e but for now it is getting a sbc 355 and the stock trans. I am just going to rat rod this at this time.

I bought it off some guy who did not take care of her.

There was no bumper so I made some brackets at work and bought one. I am being cheap and didn’t want to buy one. Plus I love making thinks with my hands and think fabrication is awesome!

The grille is somewhat smashed. For now I will just rock it but I found a NOS one on ebay in the original package new.

Here is a engine I got off a guy that was remanufactured. I cleaned it up and painted it. I also inspected it to make sure it was good everything seems to be fine.

Here is the engine now. I changed intake, and valve covers.

I put the engine in the truck and also cleaned and painted the original trans. I also changed the inner fenders as they were rusted. There are other panels that needed replacing but for now this is what I have. I am having trouble getting the hood aligned properly. I think the hinges may be sprung because the hood was catching in the back.

Here are the rusted inner fenders vs the newer ones.

Here is the trans before cleaning it and after cleaning it.

I also cleaned the frame area somewhat anyway. It looked like the transmission. I need to get a power washer but I have been saving for a house with a garage and buying parts for the jewel. Lol

I have started on painting / rattle can job. Wish I had the time and money for everything but since I do not I figure I would do a 10 ft errr uh 30 ft paint job. I have yet to finish it.

Here is another with my night train.

jy829 · 03-10-2015, 08:57 PM

Here is a pic of the engine in the truck.

**Clyde65** · 03-11-2015, 08:07 AM

nice job!

jy829 · 03-11-2015, 10:19 AM

Thanks. A lot more work to do! hard to do outside.

TJ's Chevy · 03-11-2015, 10:20 AM

Nice job! Like the engine.

mattbert56 · 03-12-2015, 01:32 AM

I like the blue on the motor....it's different

Ta2Don · 03-12-2015, 08:51 AM

Diggin' your way of thinking and the way you are taking your build...

Sub'd...

Mikes66ChevyC10 · 03-12-2015, 08:58 AM

Nice work! Like the night train also!

jy829 · 03-16-2015, 07:54 AM

Just picked up a cancer free hood. http://cincinnati.craigslist.org/pts/4885492584.html. it is in real good shape. has a couple dents but other than that no problems.

Jeff La · 03-16-2015, 09:50 AM

Betsie is looking good with a new dress on LOL

03-10-2015, 06:35 PM	#1
jy829 Registered User Join Date: Jul 2013 Location: columbus, IN Posts: 24	Betsie Here is My 1966 c10. I hope to do a frame off restomod someday with a turbocharged 6.0l ls and a 4l60enor 4l80e but for now it is getting a sbc 355 and the stock trans. I am just going to rat rod this at this time. I bought it off some guy who did not take care of her. There was no bumper so I made some brackets at work and bought one. I am being cheap and didn’t want to buy one. Plus I love making thinks with my hands and think fabrication is awesome! The grille is somewhat smashed. For now I will just rock it but I found a NOS one on ebay in the original package new. Here is a engine I got off a guy that was remanufactured. I cleaned it up and painted it. I also inspected it to make sure it was good everything seems to be fine. Here is the engine now. I changed intake, and valve covers. I put the engine in the truck and also cleaned and painted the original trans. I also changed the inner fenders as they were rusted. There are other panels that needed replacing but for now this is what I have. I am having trouble getting the hood aligned properly. I think the hinges may be sprung because the hood was catching in the back. Here are the rusted inner fenders vs the newer ones. Here is the trans before cleaning it and after cleaning it. I also cleaned the frame area somewhat anyway. It looked like the transmission. I need to get a power washer but I have been saving for a house with a garage and buying parts for the jewel. Lol I have started on painting / rattle can job. Wish I had the time and money for everything but since I do not I figure I would do a 10 ft errr uh 30 ft paint job. I have yet to finish it. Here is another with my night train.

03-10-2015, 08:57 PM	#2
jy829 Registered User Join Date: Jul 2013 Location: columbus, IN Posts: 24	Re: Betsie Here is a pic of the engine in the truck.

03-11-2015, 08:07 AM	#3
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,547	Re: Betsie nice job! __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

03-11-2015, 10:19 AM	#4
jy829 Registered User Join Date: Jul 2013 Location: columbus, IN Posts: 24	Re: Betsie Thanks. A lot more work to do! hard to do outside.

03-11-2015, 10:20 AM	#5
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Betsie Nice job! Like the engine. __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

03-12-2015, 01:32 AM	#6
mattbert56 Registered User Join Date: Mar 2013 Location: Story, Wyoming Posts: 641	Re: Betsie I like the blue on the motor....it's different __________________ Well that didn't go as planned. 1965 k20 buikd thread: http://67-72chevytrucks.com/vboard/s...=628346&page=6

03-12-2015, 08:51 AM	#7
Ta2Don Registered User Join Date: Apr 2012 Location: Searcy, AR Posts: 4,203	Re: Betsie Diggin' your way of thinking and the way you are taking your build... Sub'd... __________________ DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD

03-12-2015, 08:58 AM	#8
Mikes66ChevyC10 Registered User Join Date: Feb 2014 Location: Forest City PA Posts: 378	Re: Betsie Nice work! Like the night train also! __________________ 1966 C10 Stepside swb http://67-72chevytrucks.com/vboard/s...d.php?t=617778

03-16-2015, 07:54 AM	#9
jy829 Registered User Join Date: Jul 2013 Location: columbus, IN Posts: 24	Re: Betsie Just picked up a cancer free hood. http://cincinnati.craigslist.org/pts/4885492584.html. it is in real good shape. has a couple dents but other than that no problems.

03-16-2015, 09:50 AM	#10
Jeff La Registered User Join Date: Dec 2011 Location: Donaldsonville, La. Posts: 1,024	Re: Betsie Betsie is looking good with a new dress on LOL



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.