looking for a pic of 60-62 clutch return spring

[HumphreyMurdoch]

Hey fellas, I'm in the midst of setting up captainfabs clutch and master cyl adapter and come across a problem. There's a big bracket bolted to my clutch pedal for the return spring like on 4x4's. I'm hoping someone has a picture of the normal return spring setup for the pedal.

Side question, should there be one for the clutch fork, also? When I pulled my 6 out it didn't have one, just a big heavy spring for the clutch pedal.

[par4tom]

I can't comment on the under dash portion, but on my setup with the hydraulic clutch and the slave on the passenger side, there definately is a spring on the clutch fork return...

[Sixty_2_Hickey]

Here's mine, 62 Chevy C10:

[markeb01]

My 1960 GMC has a return spring that looks like the one in the photo above. Following is page 11-3 from the 1960 Chevy Truck Shop Manual showing the Clutch Over-Center Spring and Bracket. I'm not sure what purpose it served, but my truck never had one and has always functioned just fine:

[jtrichard]

The over center spring is for the big HD clutches

[abeha]

Side question, should there be one for the clutch fork, also? When I pulled my 6 out it didn't have one, just a big heavy spring for the clutch pedal.

[par4tom]

Here is the photo of the stock clutch spring...