58 Apache fleetside roll pan - The 1947 - Present Chevrolet & GMC Truck Message Board Network

protour · 03-19-2015, 02:46 PM

Could someone please point me in the direction of where I could buy a roll pan for my 58 apache fleet side??

Thanks!

Matthew

_Ogre · 03-19-2015, 03:12 PM

i'd say you probably have to make your own
a roll pan is an easy piece to fabricate

protour · 03-19-2015, 04:52 PM

Quote:

Originally Posted by _Ogre

i'd say you probably have to make your own
a roll pan is an easy piece to fabricate

This is true, and generally I would, but Im being lazy on this project as everything else Ive had to fabricate and would like to just weld something in for once and not fabricate it haha

**CMACDONALD1** · 03-19-2015, 05:05 PM

Try Scott's super trucks in Penhold. He can get all that stuff.

protour · 03-19-2015, 06:14 PM

Quote:

Originally Posted by CMACDONALD1

Try Scott's super trucks in Penhold. He can get all that stuff.

I tried him this morning actually. He's 3 weeks out minimum. Im scared if I comit to 3 weeks it'll be one of those 5 week things haha

**CMACDONALD1** · 03-19-2015, 06:49 PM

I PM'd you an ad. Looks to be near you too.

protour · 03-20-2015, 05:09 AM

Quote:

Originally Posted by CMACDONALD1

I PM'd you an ad. Looks to be near you too.

If this deal pans out, I owe you a couple cocktails!

**CMACDONALD1** · 03-20-2015, 10:41 AM

Haha. I hope it works out. I always keep an eye out for parts for these trucks. I put a roll pan on mine then mounted a rear bumper. These trucks look a little unfinished in my opinion with just a rear bumper mounted.

protour · 03-21-2015, 05:55 PM

Quote:

Originally Posted by CMACDONALD1

Haha. I hope it works out. I always keep an eye out for parts for these trucks. I put a roll pan on mine then mounted a rear bumper. These trucks look a little unfinished in my opinion with just a rear bumper mounted.

I owe you a cocktail! Haha picked up the roll pan and polished stainless bed sills(part that bolts to the frame) for 400. Can't complain! Now that I see the poster of the thread. Your truck was my inspiration to fill that void with a roll pan

**CMACDONALD1** · 03-22-2015, 02:32 PM

Glad that worked out! I've had my truck apart all winter. Hoping to have some fresh paint on it by summer.

All59 · 03-22-2015, 03:30 PM

I reluctant to post this because the picture is so bad but it will give you a idea of my new roll pan/bumper that's in the works the bumper is appox 3.5 inchs narrower than stock also the plate is on a slant for you can see it better.Also it will be a bolt on or mold in..........pm me for more info..........

03-19-2015, 02:46 PM	#1
protour Registered User Join Date: Feb 2005 Location: Edmonton, Alberta Posts: 16	58 Apache fleetside roll pan Could someone please point me in the direction of where I could buy a roll pan for my 58 apache fleet side?? Thanks! Matthew

03-19-2015, 03:12 PM	#2
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,677	Re: 58 Apache fleetside roll pan i'd say you probably have to make your own a roll pan is an easy piece to fabricate __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

03-19-2015, 05:05 PM	#4
CMACDONALD1 Senior Member Join Date: Jun 2007 Location: Red Deer Ab Canada Posts: 756	Re: 58 Apache fleetside roll pan Try Scott's super trucks in Penhold. He can get all that stuff. __________________ 1966 427 biscayne with a 5 spd tremec on old school torque thrusts. 1972 Cheyenne Short Bed 1958 Apache short fleet 1980 Chevy short bed http://67-72chevytrucks.com/vboard/s...d.php?t=761005 1959 "Henry" http://67-72chevytrucks.com/vboard/s...d.php?t=670461 1966 Biscayne http://67-72chevytrucks.com/vboard/s...d.php?t=444419 1972 Suburban http://67-72chevytrucks.com/vboard/s...d.php?t=478828

03-19-2015, 06:49 PM	#6
CMACDONALD1 Senior Member Join Date: Jun 2007 Location: Red Deer Ab Canada Posts: 756	Re: 58 Apache fleetside roll pan I PM'd you an ad. Looks to be near you too. __________________ 1966 427 biscayne with a 5 spd tremec on old school torque thrusts. 1972 Cheyenne Short Bed 1958 Apache short fleet 1980 Chevy short bed http://67-72chevytrucks.com/vboard/s...d.php?t=761005 1959 "Henry" http://67-72chevytrucks.com/vboard/s...d.php?t=670461 1966 Biscayne http://67-72chevytrucks.com/vboard/s...d.php?t=444419 1972 Suburban http://67-72chevytrucks.com/vboard/s...d.php?t=478828

03-20-2015, 10:41 AM	#8
CMACDONALD1 Senior Member Join Date: Jun 2007 Location: Red Deer Ab Canada Posts: 756	Re: 58 Apache fleetside roll pan Haha. I hope it works out. I always keep an eye out for parts for these trucks. I put a roll pan on mine then mounted a rear bumper. These trucks look a little unfinished in my opinion with just a rear bumper mounted. __________________ 1966 427 biscayne with a 5 spd tremec on old school torque thrusts. 1972 Cheyenne Short Bed 1958 Apache short fleet 1980 Chevy short bed http://67-72chevytrucks.com/vboard/s...d.php?t=761005 1959 "Henry" http://67-72chevytrucks.com/vboard/s...d.php?t=670461 1966 Biscayne http://67-72chevytrucks.com/vboard/s...d.php?t=444419 1972 Suburban http://67-72chevytrucks.com/vboard/s...d.php?t=478828

03-22-2015, 02:32 PM	#10
CMACDONALD1 Senior Member Join Date: Jun 2007 Location: Red Deer Ab Canada Posts: 756	Re: 58 Apache fleetside roll pan Glad that worked out! I've had my truck apart all winter. Hoping to have some fresh paint on it by summer. __________________ 1966 427 biscayne with a 5 spd tremec on old school torque thrusts. 1972 Cheyenne Short Bed 1958 Apache short fleet 1980 Chevy short bed http://67-72chevytrucks.com/vboard/s...d.php?t=761005 1959 "Henry" http://67-72chevytrucks.com/vboard/s...d.php?t=670461 1966 Biscayne http://67-72chevytrucks.com/vboard/s...d.php?t=444419 1972 Suburban http://67-72chevytrucks.com/vboard/s...d.php?t=478828

03-22-2015, 03:30 PM	#11
All59 Registered User Join Date: Apr 2010 Location: Wynndel BC Canada Posts: 28	Re: 58 Apache fleetside roll pan I reluctant to post this because the picture is so bad but it will give you a idea of my new roll pan/bumper that's in the works the bumper is appox 3.5 inchs narrower than stock also the plate is on a slant for you can see it better.Also it will be a bolt on or mold in..........pm me for more info.......... Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.