OR WTB Guages and cluster parts for my restorations.

[TBONE1964]

I have reached that point where my inventory of good clean working gauges is getting low and need to replenish my stock.

I am looking for speedometer faces for 69-72 and will consider 67-68's also. I do not care about the working condition of the speedometer head itself as I rebuild these. I actually have a large amount of heads but not enough good faces for them.

I am also looking for very nice fuel, temp, oil pressure and amp gauges. I will also take none working gauges with good faces.

Also looking for some of the small hardware such as speedometer head insulators. (the small rubber grommets that fit over the speedometer head mounting screws). I can always use lenses if they are not scratched or gouges, especially on the back side. I can wet sand and buff these if they are decent.

I am not looking for complete clusters unless they have real nice gauges and the price is right.

I am planning a trip to the Portland swap meet this year and will be looking there for gauges also.

Let me know what you have and your price shipped to 97448. Please take good close up photos of any gauges you have to offer.

Thank you to all,
Take care,
Tom

[396ci]

hi tom,
do you also do 73-87 clusters? i have a bunch of those parts.
thanks for your time,
brian

[leddzepp]

Tom- I will look and see what I have when I get some time. I would trade some gauges for another one of your volt gauge kits. Installed the one in my 68 and couldn't be happier with it, just need to pop one in my 72 now

[Elliot949]

Tom... I have a complete Gauge setup including tins, screws, Blinker lights, pads, basically everything except the bezel... PM sent...

[TBONE1964]

Originally Posted by 396ci

hi tom,
do you also do 73-87 clusters? i have a bunch of those parts.
thanks for your time,
brian

Hi Brian,

Any 76+ volt gauges? If so, how much for them?

Let me know and thank you. I don;t do many 73 and up restorations but I do use the volt gauges for my conversion kits.

Thank you,
Tom

[TBONE1964]

Originally Posted by leddzepp

Tom- I will look and see what I have when I get some time. I would trade some gauges for another one of your volt gauge kits. Installed the one in my 68 and couldn't be happier with it, just need to pop one in my 72 now

Hi Scott,

I will make sure I put your name on another conversion kit. Let me know what you come up with and we will work something out.

I appreciate it,
Tom

[TBONE1964]

Originally Posted by Elliot949

Tom... I have a complete Gauge setup including tins, screws, Blinker lights, pads, basically everything except the bezel... PM sent...

Thank you Dan,

I will get with you.
Tom

[DaHos]

Tom, got a few more dozen for ya...............funny I was going to send u a pm to see if you were in need of any.......Ill get you a list together of quality and quantity......

D'

[TBONE1964]

Originally Posted by DaHos

Tom, got a few more dozen for ya...............funny I was going to send u a pm to see if you were in need of any.......Ill get you a list together of quality and quantity......

D'

That is perfect D. I will look for it and talk to you soon. Hope all is well in Mich.

Take care,
Tom

[396ci]

Originally Posted by TBONE1964

Hi Brian,

Any 76+ volt gauges? If so, how much for them?

Let me know and thank you. I don;t do many 73 and up restorations but I do use the volt gauges for my conversion kits.

Thank you,
Tom

here's what i have tom, the older volt gauge has some surface issues and the other ones are dusty. $48 shipped on all 4 if you want them. i also think i have one more 81-87 style but the ceramic is missing. i will throw that one in if i find it. thanks for the consideration.

[TBONE1964]

Originally Posted by 396ci

here's what i have tom, the older volt gauge has some surface issues and the other ones are dusty. $48 shipped on all 4 if you want them. i also think i have one more 81-87 style but the ceramic is missing. i will throw that one in if i find it. thanks for the consideration.

Sounds good Brian,

I will take them.

Please send me a PM with your payment information.

Take care,
Tom

[DakotaKid]

Tbone1964, Are you interested in doing Trades? i have a decent complete Factory Tach setup for 67-72. im not sure what year it is. has the printed circuit sheet but no harness. all gauges are there.

i am lookign to have a 60-62 cluster redone, i have the delux cluster but no tach or vacuum gauge. is there something we could work out?

let me know and ill post some pics.

[Already Gone]

Originally Posted by DakotaKid

Tbone1964, Are you interested in doing Trades? i have a decent complete Factory Tach setup for 67-72. im not sure what year it is. has the printed circuit sheet but no harness. all gauges are there.

i am lookign to have a 60-62 cluster redone, i have the delux cluster but no tach or vacuum gauge. is there something we could work out?

let me know and ill post some pics.

I sent you a PM

[TBONE1964]

Originally Posted by DakotaKid

Tbone1964, Are you interested in doing Trades? i have a decent complete Factory Tach setup for 67-72. im not sure what year it is. has the printed circuit sheet but no harness. all gauges are there.

i am lookign to have a 60-62 cluster redone, i have the delux cluster but no tach or vacuum gauge. is there something we could work out?

let me know and ill post some pics.

I appreciate the offer but I would prefer not to do any trade on this. Have you had this cluster in a truck and checked the operation of the tach and other gauges? If the tach works, the cluster is worth $250.00 at best. If the tach does not work then you are looking at a core value of $100.00 to $125.00 depending on the condition of the circuit board.

Have you found a vacuum gauge for your 62 cluster? I look for these all of the time and they are super rare and very hard to find. The tach can be bought aftermarket.

If you want to PM me, we can go over some details on restoring your 62 cluster. I actually have a 62 cluster in my shop that is a full gauge cluster that is going to get a tach added.

Let me know and thank you,
Tom

[DakotaKid]

ok i will be PMing you.

[396ci]

Originally Posted by DakotaKid

ok i will be PMing you.

i sent you (DakotaKid) a pm

[TBONE1964]

Originally Posted by 67sss

TBONE1964- see anything that might be able to use? Hope the link works.


http://www.dropbox.com/sh/c4f0p6co9b...Wm2zd2Ema?dl=0

Thank you but nothing there that I see. I am being a little picky about what I buy for the restorations. I appreciate your time,

Take care,
Tom

[WILLNIK]

Hi Tom, I have a few parts for you to look at.

Thanks, Terry

[sduckworth13]

Ttt

[TBONE1964]

Originally Posted by WILLNIK

Hi Tom, I have a few parts for you to look at.

Thanks, Terry

Hi Terry,

I am sending PM.

Thank you,
Tom

[TBONE1964]

Originally Posted by sduckworth13

Ttt

Thank you Scott. I think with the help of Mr DaHos, I may be all set.

Hope all is well with you,
Take care,
Tom