NC WTB 67 292 engine 4X4 frame mount

[qksilver]

Lost my set and really don't have the time or strength to search thru everything.

1967 1/2 4x4 292 motor need the frame stand that mounts to the crossmember right side.

Been quite a while but i need the mount to fit this style of mount pictured on my motor. If it the motor I have doesn't have the correct mount I need to set this engine in my 67, so tell me what will work. Need factory location. Replace a badly done V-8 conversion but I do have the stock angled 4X4 crossmember

Let me know

Thanks,
Steve

[CUSTOM/10]

The 292 4x4 engine cross member is different than any others due to the location of the bolts holes on the engine being off-set from one side to the other. The cross member sits at an angle in the frame. If you have one of these it might be easier to search for it than find another one, there not very common.

Gary

[67-4x4]

I have the whole setup pm me its off a 67 switched it over to v8

[qksilver]

i have the cross member installed, they didn't remove it thats why the V-8 swap wasn't done very well

Pm'ing you67

[milehigreg]

I think I have these parts. Off of a 68 4 X 4 long bed with a 292. Took a picture with my phone this weekend. PM me your phone number and I'll text you a picture.

[qksilver]

still in need, help me guys

been trying to get these parts for 5 months................

Thanks,
Steve