|
03-25-2015, 05:56 PM
|
#1 |
|
Registered User
Join Date: Jul 2010
Location: Janesville, WI
Posts: 664
|
64 4x4 rear end
I've got a Friend that grenaded his rear in his factory 4x4 swb 64 chevy. Does anyone have info on what rear ends, whole housings will work for him?
|
|
|
|
03-26-2015, 01:30 AM
|
#2 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: 64 4x4 rear end
The 12 bolt housings from '63 to early '70 will be the same width, but keep in mind that the '63 and '64 12 bolts will have 17 spline axles and spider gears. Late '70 to '79 12 bolt in the k series will be 1.5" wider.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
03-26-2015, 07:38 AM
|
#3 |
|
Registered User
Join Date: Jul 2010
Location: Janesville, WI
Posts: 664
|
Re: 64 4x4 rear end
Good info! Thank you! If the 67 68 69 rear were leaf spring equipped do the perches line up?
|
|
|
|
|
03-27-2015, 12:54 AM
|
#4 | |
|
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: 64 4x4 rear end
I'm pretty sure they will.
Quote:
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
|
03-27-2015, 05:47 AM
|
#5 |
|
Senior Member
Join Date: Aug 2008
Location: Long Beach, CA
Posts: 1,813
|
Re: 64 4x4 rear end
Perches are the same width, 40", through 1972 for k5, k10 and k20.
__________________
Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble! |
|
|
|
|
03-27-2015, 05:51 AM
|
#6 |
|
Senior Member
Join Date: Aug 2008
Location: Long Beach, CA
Posts: 1,813
|
Re: 64 4x4 rear end
Since his is a short bed it would be a 1/2 ton and have a GM Corp 12 bolt with a WMS-WMS width of 63". 3/4 ton would be an Eaton HO52 with a WMS-WMS width of 65".
You can use a 73-87 axle but you'd have to cut and reweld the perches as they are 42.5" apart. WMS-WMS would also be 65" for those 12 bolts and 67" for the 12 bolts.
__________________
Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble! |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
