Tall & Skinny wheel combo on 6" lift?

[rs74]

I am not sure if this is the correct forum for this but I am going to throw it out there. I just bought an 03 short bed 4wd with a 6" Superlift on it and I believe it has 315/75/16's on a 10" wheel. Anyway I don't much care for the offset of the wheels. I am wanting something that will tuck in the wheel wells better and save the paint.

I am thinking about trying some factory wheels with a tall and skinny tire. I really can't find any pics of what I am wanting it to look like except for one and it has 18" wheels on it. Running a 16 or 18" wheel would probably be ideal since I kind of want to run a white lettered tire on it. So I am looking for suggestions or pics of trucks with wheel sizes. I am wanting them to tuck and not wanting anything really wide.

Here is a pic of the Maroon 03 I bought and a pic of the truck setup that I kind of like on the black truck. I really like how the black truck looks minus that style of wheel. All I know about the black truck set up is that the wheels are 18" Cadillac and tires are said to be 35's but not sure if they are a true 35" or if they are equivalent to a 35.

[ND_guy]

255/86/16 are about 34" tall and 10' wide.
or if you want tall skinny and aggressive Q78 tire

[rs74]

I like the KM2's but dang they are expensive. They have really went up in price since I bought a new set of the old Mud Terrains. Still looking at both 16 and 18" factory wheels.

[special-K]

There are some 35/10.50-16s. In scale they are taller and narrower than average proportions. 255/85s would look teeny with a 6" lift I think.
here they are with 2" of lift mounted on 7" wheels:

[rs74]

I have seen a few 35x10.50's but they were all swampers, boggers and the like. More aggressive than what I would want.

[RedRoad]

Originally Posted by special-K

There are some 35/10.50-16s. In scale they are taller and narrower than average proportions. 255/85s would look teeny with a 6" lift I think.
here they are with 2" of lift mounted on 7" wheels:

I LIKE!! What brand?

My 255/85/16 only measure 32 inches on late steel rims

[57NAPCO]

RS, you still have the dually?

[rs74]

Originally Posted by 57NAPCO

RS, you still have the dually?

Unfortunately I did. I absolutely didn't want to after everything I did to get it but was a decision that had to be made.

[special-K]

Originally Posted by RedRoad

I LIKE!! What brand?

My 255/85/16 only measure 32 inches on late steel rims

these are Cooper Discoverer S/Ts. I just checked their site and they spec them at 33.23. Everyone seems to call them 34s, I guess because they are 33+. I guess most 33/12.50s I've checked were under 33, too. Section width is 10" and tread width is 7.2"

The 235/85s are 31.89