Power steering pump for ac delco 36-18429 Rack on Must ll kit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hampshire · 04-01-2015, 10:42 AM

I have one of these steering racks rs) which are commonly used on Mustang ll kits and wondering what pump/part number to use for a PS pump.

I'm running a 350 SB & I have also seen a reference to using a GM Type 2 Pump?

Any recommendations?

dwcsr · 04-01-2015, 12:03 PM

You can use either pump but you may need a pressure reducer kit. Mii rack use about 300 psi less pressure than a GM pump puts out. Make sure you don't get a pump that's for Hydraboost brakes. Borgeson has the pumps , reducers and hose kits for MII to GM pump

solidaxel · 04-01-2015, 12:06 PM

Speedway also sells a reducer and fitting for G M pumps

_Ogre · 04-01-2015, 12:21 PM

use any 1970 to 2000 gm pump, they're basically all the same
you'll need the flow reducer as stated

but...

why put an oversized gm pump on a ford rack that needs the flow reducer
while my truk does have the ford rack and gm pump, if i had it to do over i'd put a ford pump on

Hampshire · 04-01-2015, 12:30 PM

Very helpful, guys - thanks for responding

lv2tri2 · 04-01-2015, 04:21 PM

I have a MII rack, no pump yet. Is there a particular Ford pump I should get?

Hampshire · 04-01-2015, 04:30 PM

I called Borgeson today. They are right in my backyard & have a reduced pressure GM pump for my rack + short or long water pump brackets, etc. (or you can buy the flow reducer/shim kit from them for your pump GM/saginaw).

http://www.borgeson.com/xcart/catalo...-p-1-c-83.html

**mr48chev** · 04-01-2015, 04:37 PM

I'd rather spend 30 something dollars for the reducer valve than 30 something hours trying to figure out how to cobble brackets to put a Ford pump on a GM engine. Ford even went to Saginaw pumps in later years.

Borgson makes a shim kit that you can reduce the pressure in your pump with too http://www.borgeson.com/xcart/catalo...p-1-c-133.html

1952 · 04-01-2015, 07:14 PM

I put the borgeson kit in my gm pump took 10 minutes and will allow you to set the pressure softer or firm depending how many shims are installed. easy directions

solidaxel · 04-01-2015, 08:20 PM

Quote:

Originally Posted by lv2tri2

I have a MII rack, no pump yet. Is there a particular Ford pump I should get?

The best looking Ford pump you can find and mount up to your engine, to run off the crank pulley

Are Ford pumps aprox the same price?

_Ogre · 04-02-2015, 01:42 PM

Quote:

Originally Posted by lv2tri2

I have a MII rack, no pump yet. Is there a particular Ford pump I should get?

mustII was 73 to 78, but most kits use the cougar rack
i'd think any mid 70s mustang or cougar pump would work fine

as for the bracket? i made all of my brackets anyway
gm, ford, mopar would be as easy as the other to fabricate
that's one way to keep cost down

2 plates, some tubing and a few bolts

solidaxel · 04-02-2015, 04:02 PM

Any pictures of a Ford pump, or is that Saginaw pump what Ford uses these days?

04-01-2015, 10:42 AM	#1
Hampshire Registered User Join Date: Oct 2013 Location: Western MA Posts: 281	Power steering pump for ac delco 36-18429 Rack on Must ll kit I have one of these steering racks rs) which are commonly used on Mustang ll kits and wondering what pump/part number to use for a PS pump. I'm running a 350 SB & I have also seen a reference to using a GM Type 2 Pump? Any recommendations? Last edited by Hampshire; 04-01-2015 at 11:06 AM.

04-01-2015, 12:03 PM	#2
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,131	Re: Power steering pump for ac delco 36-18429 Rack on Must ll kit You can use either pump but you may need a pressure reducer kit. Mii rack use about 300 psi less pressure than a GM pump puts out. Make sure you don't get a pump that's for Hydraboost brakes. Borgeson has the pumps , reducers and hose kits for MII to GM pump

04-01-2015, 12:06 PM	#3
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: Power steering pump for ac delco 36-18429 Rack on Must ll kit Speedway also sells a reducer and fitting for G M pumps __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

04-01-2015, 12:21 PM	#4
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,680	Re: Power steering pump for ac delco 36-18429 Rack on Must ll kit use any 1970 to 2000 gm pump, they're basically all the same you'll need the flow reducer as stated but... why put an oversized gm pump on a ford rack that needs the flow reducer while my truk does have the ford rack and gm pump, if i had it to do over i'd put a ford pump on __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

04-01-2015, 12:30 PM	#5
Hampshire Registered User Join Date: Oct 2013 Location: Western MA Posts: 281	Re: Power steering pump for ac delco 36-18429 Rack on Must ll kit Very helpful, guys - thanks for responding

04-01-2015, 04:21 PM	#6
lv2tri2 Registered User Join Date: Feb 2013 Location: Fallbrook California Posts: 250	Re: Power steering pump for ac delco 36-18429 Rack on Must ll kit I have a MII rack, no pump yet. Is there a particular Ford pump I should get?

04-01-2015, 04:30 PM	#7
Hampshire Registered User Join Date: Oct 2013 Location: Western MA Posts: 281	Re: Power steering pump for ac delco 36-18429 Rack on Must ll kit I called Borgeson today. They are right in my backyard & have a reduced pressure GM pump for my rack + short or long water pump brackets, etc. (or you can buy the flow reducer/shim kit from them for your pump GM/saginaw). http://www.borgeson.com/xcart/catalo...-p-1-c-83.html Last edited by Hampshire; 04-01-2015 at 05:00 PM.

04-01-2015, 04:37 PM	#8
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,705	Re: Power steering pump for ac delco 36-18429 Rack on Must ll kit I'd rather spend 30 something dollars for the reducer valve than 30 something hours trying to figure out how to cobble brackets to put a Ford pump on a GM engine. Ford even went to Saginaw pumps in later years. Borgson makes a shim kit that you can reduce the pressure in your pump with too http://www.borgeson.com/xcart/catalo...p-1-c-133.html __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. Last edited by mr48chev; 04-01-2015 at 04:44 PM.

04-01-2015, 07:14 PM	#9
1952 Registered User Join Date: Dec 2012 Location: BC Posts: 61	Re: Power steering pump for ac delco 36-18429 Rack on Must ll kit I put the borgeson kit in my gm pump took 10 minutes and will allow you to set the pressure softer or firm depending how many shims are installed. easy directions

04-02-2015, 04:02 PM	#12
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: Power steering pump for ac delco 36-18429 Rack on Must ll kit Any pictures of a Ford pump, or is that Saginaw pump what Ford uses these days? __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.