DIY Pressure Brake Bleeder - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sodly · 04-03-2015, 10:54 PM

Has anyone made/used one of these on their original, single-circuit master cylinder? I have the clip-top style, not the spin on style. How did you make a m/c cap with an air inlet?

earl84 · 04-04-2015, 10:57 AM

I add one using 3/16 plate steel, drilled and tapped for the proper sized how barb fitting. Then used a spare deal from another master cylinder cover with the center cut out. Clamped to master with C clamp, worked well.

04-03-2015, 10:54 PM	#1
sodly Registered User Join Date: Nov 2009 Location: Nebraska Posts: 1,034	DIY Pressure Brake Bleeder Has anyone made/used one of these on their original, single-circuit master cylinder? I have the clip-top style, not the spin on style. How did you make a m/c cap with an air inlet? __________________ WANTED: * 60-66 Chevy and GMC FACTORY PHOTOGRAPHY (scans) of pickups and carryalls. *Custom Camper Club*-- Own a 65-66 Custom Camper? Join us at: http://67-72chevytrucks.com/vboard/g...hp?groupid=117

04-04-2015, 10:57 AM	#2
earl84 Registered User Join Date: Aug 2011 Location: Montrose, CO Posts: 972	Re: DIY Pressure Brake Bleeder I add one using 3/16 plate steel, drilled and tapped for the proper sized how barb fitting. Then used a spare deal from another master cylinder cover with the center cut out. Clamped to master with C clamp, worked well.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.