Rust removal: anyone try this? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gipper · 04-07-2015, 07:10 PM

Quote:

Originally Posted by swamp rat

This is suppose to work well, buy a wading pool and fill it up, keep a cover on it. it takes a while to remove all the rust but its non toxic. then power wash it off and let it dry. There are video's on youtube about it.

I took a minute and found the video on molasses: https://www.youtube.com/watch?v=b-_z4tinnXk

**70STOVEBOLT** · 04-07-2015, 09:28 PM

I used a product called Oxysolv. I got it from Eastwood, but it may be available elsewhere. It removes rust and leaves behind a zinc phosphate coating.

pat english · 04-07-2015, 09:54 PM

check this link out.I did the molasses on some real old parts.It works.
http://www.jalopyjournal.com/forum/t...-build.772080/

04-07-2015, 09:28 PM	#27
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: Rust removal: anyone try this? I used a product called Oxysolv. I got it from Eastwood, but it may be available elsewhere. It removes rust and leaves behind a zinc phosphate coating. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

04-07-2015, 09:54 PM	#28
pat english Registered User Join Date: Aug 2013 Location: la puente ca Posts: 358	Re: Rust removal: anyone try this? check this link out.I did the molasses on some real old parts.It works. http://www.jalopyjournal.com/forum/t...-build.772080/



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.