New Mar-K Product: Cargo Tie Downs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**FirstOwner69** · 04-02-2015, 06:14 PM

I've seen several threads the last couple years asking for tie down ideas. I just received an email from Mar-K with a link to their new cargo tie downs for wood beds. Not sure why they wouldn't work with steel floor beds as well. Pretty slick but not cheap. Here's the link.

http://www.mar-k.com/Catalog/catalog...temID%3d100075

BugzC10 · 04-02-2015, 06:33 PM

Those are nice..but $40 bucks a piece..ouch

**special-K** · 04-02-2015, 09:04 PM

Was that link supposed to take us directly to the tie-downs?

EDIT: Ok, I see it does once you put in vehicle info. Thought that would just get you to the catalog.

Hey Ten Ring, it says the eye bolts can be removed when not in use

In The Ten Ring · 04-02-2015, 09:16 PM

I'd like to have tie downs but I want tie downs that lay flat out of the way when not needed.

**derotoreut** · 04-02-2015, 09:28 PM

After looking at them, they're now worth the money IMO. I'd come up with something else.

lowrollin70gmc · 04-02-2015, 10:54 PM

I've used these in a few vehicles, they aren't chrome but at $11.69/pair it's much less expensive. The pairs I bought were from a local hardware store but Amazon also lists them.

Amazon.com link

**FirstOwner69** · 04-02-2015, 11:00 PM

Quote:

Originally Posted by lowrollin70gmc

I've used these in a few vehicles, they aren't chrome but at $11.69/pair it's much less expensive. The pairs I bought were from a local hardware store but Amazon also lists them.

Amazon.com link

Northern Tool also has them.
http://www.northerntool.com/shop/too...3295_200373295

As I said in my first post, the Mar-K version isn't cheap. However, they are a lot classier.

Willy Prost · 04-03-2015, 02:05 PM

How about this for a recessed d-link for a tie down?
Scroll down to the recessed d-links.
http://www.snappinturtle.com/all-par...ring-products/

Lou Boffa · 04-07-2015, 09:44 PM

One down, 3 more to go. These are the bull ring type. Nice and clean, retract when not in use.

BugzC10 · 04-08-2015, 07:48 AM

Quote:

Originally Posted by Lou Boffa

One down, 3 more to go. These are the bull ring type. Nice and clean, retract when not in use.

Very nice...How about some addition pictures. Where did you buy them?

Lou Boffa · 04-08-2015, 11:22 AM

Got them on Amazon. They are listed as Bull Ring 9054 Tundra Crew Max. Had to modify the underneath, but not too bad. Bit pricey, but somehow when it comes to my truck I just dont seem to mind. My bed is made w Trex Decking, so a slightly thicker than the standard bed wood.

sboris · 04-08-2015, 11:34 AM

Those look nice Lou. Beautiful floor. (I hope your not really gonna haul with that)! Too purdy!
Here is a pic of the Mar-k ones.

I went with the not as "classy" ones

from northern. Work well, and it is nice they are removable. And the price not to bad either. Plasti dipped. Mounted in the sides. Would like something like Lou's, only not flashy. I need something lower.
[URL=http://s1150.photobucket.com/user/Sboris01/media/72eadd61889a0d53d0981b5454b36b70.jpg.html]

[/URL

67ChevyRedneck · 04-08-2015, 12:22 PM

Quote:

Originally Posted by Lou Boffa

One down, 3 more to go. These are the bull ring type. Nice and clean, retract when not in use.

What holds the whole assembly to the floor? Just those two little screws???

Lou Boffa · 04-08-2015, 01:10 PM

2 1/4 20's threaded through a steel collar and then bolted to a steel plate screwed to the bottom of the decking. I wouldnt trust it with anything heavy and tall like a fridge, but ok with most things I'd haul.

04-02-2015, 06:14 PM	#1
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,844	New Mar-K Product: Cargo Tie Downs I've seen several threads the last couple years asking for tie down ideas. I just received an email from Mar-K with a link to their new cargo tie downs for wood beds. Not sure why they wouldn't work with steel floor beds as well. Pretty slick but not cheap. Here's the link. http://www.mar-k.com/Catalog/catalog...temID%3d100075

04-02-2015, 06:33 PM	#2
BugzC10 Registered User Join Date: Oct 2012 Location: Green Valley Arizona Posts: 1,351	Re: New Mar-K Product: Cargo Tie Downs Those are nice..but $40 bucks a piece..ouch __________________ 1970 C10 Short Stepper with 71/72 front clip.

04-02-2015, 09:04 PM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: New Mar-K Product: Cargo Tie Downs Was that link supposed to take us directly to the tie-downs? EDIT: Ok, I see it does once you put in vehicle info. Thought that would just get you to the catalog. Hey Ten Ring, it says the eye bolts can be removed when not in use __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 04-02-2015 at 10:24 PM.

04-02-2015, 09:16 PM	#4
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,421	Re: New Mar-K Product: Cargo Tie Downs I'd like to have tie downs but I want tie downs that lay flat out of the way when not needed.

04-02-2015, 09:28 PM	#5
derotoreut Roto Reuter thats the name... Join Date: Feb 2010 Location: Darien, NY Posts: 1,853	Re: New Mar-K Product: Cargo Tie Downs After looking at them, they're now worth the money IMO. I'd come up with something else. __________________ ~ Dan My 70 K10 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=782232 My 71 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=651394 1970 SWB Fleet K10 4X4, 5.3L LM7, 4L60E, Dakota Digital RTX, Vintage Air, Ididit tilt 1971 SWB Fleet C10 - Original SWB Arizona truck, new custom restoration project "Kick out your motor and drive while you're still alive - kick it out!" - Heart 1977

04-02-2015, 10:54 PM	#6
lowrollin70gmc Too many projects Join Date: Mar 2004 Location: Fargo, ND land of the flat hills Posts: 1,147	Re: New Mar-K Product: Cargo Tie Downs I've used these in a few vehicles, they aren't chrome but at $11.69/pair it's much less expensive. The pairs I bought were from a local hardware store but Amazon also lists them. Amazon.com link __________________ Andrew 84 GMC C1500 SWB 6.2 Diesel/700R4/3.42 "Grandpa's odd duck" 70 GMC C1500 LWB My first truck: shaved, bagged, and more: the lowrollin70gmc 68 K20 Suburban 12V Cummins/NV5600/NP205/D60/11.5AAM 3.73s "Dakota Cadillac" 63 Chevy II Nova Coupe 250 I6/T56/4.56s "Economy car" 53 Willys Wagon 350/NV4500/BW4401/HP D44/9inch “Winter Wagon” 30 Model A 16 Focus ST

04-03-2015, 02:05 PM	#8
Willy Prost Senior Member Join Date: Jan 2000 Location: Arlington, VA Posts: 398	Re: New Mar-K Product: Cargo Tie Downs How about this for a recessed d-link for a tie down? Scroll down to the recessed d-links. http://www.snappinturtle.com/all-par...ring-products/

04-07-2015, 09:44 PM	#9
Lou Boffa Registered User Join Date: Jan 2013 Location: San Antonio, TX Posts: 733	Re: New Mar-K Product: Cargo Tie Downs One down, 3 more to go. These are the bull ring type. Nice and clean, retract when not in use. Attached Images __________________ Figure out what you want--then figure out what you are willing to give up to get it.

04-08-2015, 11:22 AM	#11
Lou Boffa Registered User Join Date: Jan 2013 Location: San Antonio, TX Posts: 733	Re: New Mar-K Product: Cargo Tie Downs Got them on Amazon. They are listed as Bull Ring 9054 Tundra Crew Max. Had to modify the underneath, but not too bad. Bit pricey, but somehow when it comes to my truck I just dont seem to mind. My bed is made w Trex Decking, so a slightly thicker than the standard bed wood. Attached Images __________________ Figure out what you want--then figure out what you are willing to give up to get it.

04-08-2015, 11:34 AM	#12
sboris Registered User Join Date: Jun 2011 Location: Osceola, Ia Posts: 2,017	Re: New Mar-K Product: Cargo Tie Downs Those look nice Lou. Beautiful floor. (I hope your not really gonna haul with that)! Too purdy! Here is a pic of the Mar-k ones. I went with the not as "classy" ones from northern. Work well, and it is nice they are removable. And the price not to bad either. Plasti dipped. Mounted in the sides. Would like something like Lou's, only not flashy. I need something lower. [URL=http://s1150.photobucket.com/user/Sboris01/media/72eadd61889a0d53d0981b5454b36b70.jpg.html][/URL __________________ Shawn 68 chevy K/20 05 chevy 3/4 4x4 71 short step-sold 71 chevy Beauville van My build. http://67-72chevytrucks.com/vboard/s...d.php?t=633039

04-08-2015, 01:10 PM	#14
Lou Boffa Registered User Join Date: Jan 2013 Location: San Antonio, TX Posts: 733	Re: New Mar-K Product: Cargo Tie Downs 2 1/4 20's threaded through a steel collar and then bolted to a steel plate screwed to the bottom of the decking. I wouldnt trust it with anything heavy and tall like a fridge, but ok with most things I'd haul. __________________ Figure out what you want--then figure out what you are willing to give up to get it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.