Can't remove my wiper arms - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**71CHEVYSHORTBED402** · 04-08-2015, 10:13 PM

I bought the Snap-on tool number A192. I figure all I have to do is per the picture below. Doesn't seem to want to budge and I don't want jack anything up. What the heck? No rust. I sprayed some silicone........came up empty.

**71CHEVYSHORTBED402** · 04-08-2015, 10:22 PM

Okay, I found it was easier to flip it over compared to picture for the LH side.

Two hands. One pushes the bar forward while pulling the extension on the arm(spring) back like the picture, the other is under the base of the wiper arm, pushing the arm straight out. I'm lucky I didn't mess anything up. I was applying too much pressure, but not using the other hand. Like most things, if it's a struggle, then you're doing it wrong. Tape the arms off, and paint just in case, but you really shouldn't need to. It should come off with ease.

Lanman1972 · 04-08-2015, 10:39 PM

I can't wait for My next truck project when all these little details are easy!

**71CHEVYSHORTBED402** · 04-08-2015, 11:12 PM

Quote:

Originally Posted by Lanman1972

I can't wait for My next truck project when all these little details are easy!

It's all in the details dude. I'm taking notes as well. A bunch. A ton of knowledge on this board.

70 shop truck · 04-09-2015, 04:29 AM

Well you helped me by figuring it out. I was going to remove mine this weekend and have been looking at them trying to figure out how to remove without messing them up. Thanks.

04-08-2015, 10:13 PM	#1
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,218	Can't remove my wiper arms I bought the Snap-on tool number A192. I figure all I have to do is per the picture below. Doesn't seem to want to budge and I don't want jack anything up. What the heck? No rust. I sprayed some silicone........came up empty. __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

04-08-2015, 10:22 PM	#2
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,218	Re: Can't remove my wiper arms Okay, I found it was easier to flip it over compared to picture for the LH side. Two hands. One pushes the bar forward while pulling the extension on the arm(spring) back like the picture, the other is under the base of the wiper arm, pushing the arm straight out. I'm lucky I didn't mess anything up. I was applying too much pressure, but not using the other hand. Like most things, if it's a struggle, then you're doing it wrong. Tape the arms off, and paint just in case, but you really shouldn't need to. It should come off with ease. __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025 Last edited by 71CHEVYSHORTBED402; 04-19-2015 at 10:03 PM.

04-08-2015, 10:39 PM	#3
Lanman1972 Registered User Join Date: Dec 2013 Location: Omaha NE Posts: 620	Re: Can't remove my wiper arms I can't wait for My next truck project when all these little details are easy!

04-09-2015, 04:29 AM	#5
70 shop truck Registered User Join Date: Oct 2014 Location: hampstead nc Posts: 78	Re: Can't remove my wiper arms Well you helped me by figuring it out. I was going to remove mine this weekend and have been looking at them trying to figure out how to remove without messing them up. Thanks. __________________ 1970 Long bed- Stress release "There are only two kinds of people that understand Marines: Marines and those who have met them in battle. Everyone else has a second-hand opinion." Unknown



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.