TX Door cuts anyone? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevytruckluver · 04-19-2015, 04:08 PM

I have 2 door that I about to scrap, before I just toss them I thought I would offer them out. If anyone needs some cuts from these let me know and I will see if I can help you out. You just pay for shipping of anything you need.

lchall · 04-19-2015, 04:36 PM

I could use the door bottom from the first picture assuming its pretty good across the front. Need to patch up some speaker holes the PO butchered into the doors. Circled in green.

If you could cut along the line where the door panel would start then all the way around the bend that would be great. Really just need the face of it. PO had put a 6x9 in each door and even got down into the raised area on the bottom. Can cut in half (top/bottom) if that helps with shipping. Would be shipped to 63303.

Name: p.jpg
Views: 402
Size: 107.2 KB

Thanks - Chad

**too much stuff** · 04-19-2015, 05:07 PM

Lower door panel nuts in good condition?

chevytruckluver · 04-19-2015, 05:14 PM

Quote:

Originally Posted by lchall

I could use the door bottom from the first picture assuming its pretty good across the front. Need to patch up some speaker holes the PO butchered into the doors. Circled in green.

If you could cut along the line where the door panel would start then all the way around the bend that would be great. Really just need the face of it. PO had put a 6x9 in each door and even got down into the raised area on the bottom. Can cut in half (top/bottom) if that helps with shipping. Would be shipped to 63303.

Attachment 1392909

Thanks - Chad

That's why the other door has the same section missing...haha
I will cut it and box it and get you a price
Thanks

chevytruckluver · 04-19-2015, 05:16 PM

Quote:

Originally Posted by too much stuff

Lower door panel nuts in good condition?

No sorry

Woodnears · 04-19-2015, 05:21 PM

I would be interested in the bottom I side and out of a couple doors if they aren't rusted or beat up too bad.

Undone · 04-19-2015, 05:22 PM

How are the door bottoms?

chevytruckluver · 04-19-2015, 06:12 PM

Quote:

Originally Posted by lchall

I could use the door bottom from the first picture assuming its pretty good across the front. Need to patch up some speaker holes the PO butchered into the doors. Circled in green.

If you could cut along the line where the door panel would start then all the way around the bend that would be great. Really just need the face of it. PO had put a 6x9 in each door and even got down into the raised area on the bottom. Can cut in half (top/bottom) if that helps with shipping. Would be shipped to 63303.

Attachment 1392909

Thanks - Chad

Hey Chad I made the cut, there is an inner reinforcement that I had to drill out 3 spot welds. will look for a box tomorrow

lchall · 04-19-2015, 06:38 PM

Quote:

Originally Posted by chevytruckluver

Hey Chad I made the cut, there is an inner reinforcement that I had to drill out 3 spot welds. will look for a box tomorrow

That looks perfect. Thanks a lot. Just let me know what I owe you.

Thanks - Chad

chevytruckluver · 04-19-2015, 06:45 PM

Updated pics after some cutting.
undone, woodnears do you see something you can use?

ls1nova71 · 04-20-2015, 11:43 PM

I could use the front corners of both doors. I have some 2 ton doors I need to convert back to 1/2 ton doors. They don't look rusty, are they bondo'd up or anything?

This part. Let me know how much, Thanks.

chevytruckluver · 04-21-2015, 06:05 PM

Quote:

Originally Posted by ls1nova71

I could use the front corners of both doors. I have some 2 ton doors I need to convert back to 1/2 ton doors. They don't look rusty, are they bondo'd up or anything?

This part. Let me know how much, Thanks.

The inside is not rusty, the outside has been worked some but I don't know if its just a skim coat, I will cut them off and see what happens, will let you know!

ls1nova71 · 04-21-2015, 06:43 PM

Quote:

Originally Posted by chevytruckluver

The inside is not rusty, the outside has been worked some but I don't know if its just a skim coat, I will cut them off and see what happens, will let you know!

Cool, the inside part is mainly what I need, I can make a patch for the outside if I have to. Let me know how much. Thanks.

chevytruckluver · 04-21-2015, 07:34 PM

Quote:

Originally Posted by ls1nova71

Cool, the inside part is mainly what I need, I can make a patch for the outside if I have to. Let me know how much. Thanks.

Here is the cut part you asked about on the 3rd pic you can see a dent with a little rust but since you will be able to get to the back of it now it may be ok.
Let me know

ls1nova71 · 04-21-2015, 10:23 PM

Thats really more than I need and will probably be harder to ship. All I really need it this much, but if it can be shipped reasonably I will take them that way so you dont have to mess with cutting them again. Just let me know.

chevytruckluver · 04-22-2015, 07:23 PM

Quote:

Originally Posted by ls1nova71

Thats really more than I need and will probably be harder to ship. All I really need it this much, but if it can be shipped reasonably I will take them that way so you dont have to mess with cutting them again. Just let me know.

pm sent

UP GRADE · 04-22-2015, 09:28 PM

Hey chevytruck I could use this part. It's on the driver door it's the upper piece where the door hinge bolt to.

[/IMG]

chevytruckluver · 04-22-2015, 11:07 PM

Quote:

Originally Posted by UP GRADE

Hey chevytruck I could use this part. It's on the driver door it's the upper piece where the door hinge bolt to.

[/IMG]

Ok, so you need a couple of inches above and below the hinge? and just the driver's door correct?

UP GRADE · 04-23-2015, 11:55 AM

Yes mine is rusted out.

chevytruckluver · 04-24-2015, 08:33 AM

Quote:

Originally Posted by UP GRADE

Yes mine is rusted out.

Okay, I got this cut out for you. If you think that will work for you let me know
Thanks
Trey

04-19-2015, 04:08 PM	#1
chevytruckluver Eat, Sleep, Drive a Chevy Join Date: Apr 2010 Location: the town of the cow, Texas Posts: 1,152	Door cuts anyone? I have 2 door that I about to scrap, before I just toss them I thought I would offer them out. If anyone needs some cuts from these let me know and I will see if I can help you out. You just pay for shipping of anything you need. Attached Images __________________ Trey Silence may be Golden, but Duct Tape is Silver! 72 Short Step 57 "big window" short step

04-19-2015, 04:36 PM	#2
lchall Registered User Join Date: Feb 2008 Location: St. Charles, MO Posts: 291	Re: Door cuts anyone? I could use the door bottom from the first picture assuming its pretty good across the front. Need to patch up some speaker holes the PO butchered into the doors. Circled in green. If you could cut along the line where the door panel would start then all the way around the bend that would be great. Really just need the face of it. PO had put a 6x9 in each door and even got down into the raised area on the bottom. Can cut in half (top/bottom) if that helps with shipping. Would be shipped to 63303. Thanks - Chad __________________ 1967 Chevy SWB 1972 Chevy SWB 1972 Chevy SWB K20 4x4 1991 Ford F-150 2013 Dodge Ram 1500 4x4

04-19-2015, 05:07 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Door cuts anyone? Lower door panel nuts in good condition? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-19-2015, 05:21 PM	#6
Woodnears Registered User Join Date: Feb 2010 Location: Dodge city Ks Posts: 618	Re: Door cuts anyone? I would be interested in the bottom I side and out of a couple doors if they aren't rusted or beat up too bad.

04-19-2015, 05:22 PM	#7
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 896	Re: Door cuts anyone? How are the door bottoms?

04-19-2015, 06:45 PM	#10
chevytruckluver Eat, Sleep, Drive a Chevy Join Date: Apr 2010 Location: the town of the cow, Texas Posts: 1,152	Re: Door cuts anyone? Updated pics after some cutting. undone, woodnears do you see something you can use? Attached Images __________________ Trey Silence may be Golden, but Duct Tape is Silver! 72 Short Step 57 "big window" short step

04-20-2015, 11:43 PM	#11
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: Door cuts anyone? I could use the front corners of both doors. I have some 2 ton doors I need to convert back to 1/2 ton doors. They don't look rusty, are they bondo'd up or anything? This part. Let me know how much, Thanks. Attached Images __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html Last edited by ls1nova71; 04-20-2015 at 11:56 PM.

04-21-2015, 10:23 PM	#15
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: Door cuts anyone? Thats really more than I need and will probably be harder to ship. All I really need it this much, but if it can be shipped reasonably I will take them that way so you dont have to mess with cutting them again. Just let me know. Attached Images __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

04-22-2015, 09:28 PM	#17
UP GRADE one set closer Join Date: Jul 2003 Location: Memphis TN. Posts: 722	Re: Door cuts anyone? Hey chevytruck I could use this part. It's on the driver door it's the upper piece where the door hinge bolt to. [/IMG] Last edited by UP GRADE; 04-22-2015 at 09:34 PM.

04-23-2015, 11:55 AM	#19
UP GRADE one set closer Join Date: Jul 2003 Location: Memphis TN. Posts: 722	Re: Door cuts anyone? Yes mine is rusted out.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.