|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-25-2015, 11:47 PM
|
#1 |
|
Registered User
Join Date: Apr 2015
Location: Santa Rosa, CA
Posts: 33
|
Front Disk Brake Conversion 1965 C10
I bought a set of 6 lug steelies for my 1965
 C10. We just did a disk brake conversion in the front, and the hub hole will fit around the front hub perfect. But, in the rear (still original) the hub holes will not fit around the hub, due to the rear hubs (original) being larger than the front hubs (new disk brakes.) Is it okay to mill out the hub holes on two of the wheels so that they fit around the rear hubs?
|
|
|
|
04-26-2015, 12:26 AM
|
#2 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: Front Disk Brake Conversion 1965 C10
If you open up the wheel center hole, then you will always have to use those wheels on the rear. If it were mine, I would have the hub register on the axles machined down to fit the wheels. I assume your front hubs are about 3.062" diameter?
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
