The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-05-2015, 08:59 PM   #10
Mike C
Registered User
 
Mike C's Avatar
 
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,788
Re: 1979 K20 pitman arm rubbing my 315/75/r16 - is this normal?

The 36" bias military tires will fit with a 4" lift. But they suck on the street. I just got rid of mine. They were exactly the same size as the 35" BFG MT's that used to be on the truck but the 8 lug swap needed larger diameter rims and the combo I found at the time fit the budget. The 37's will need 6" lift and maybe some trimming as they are a LOT bigger.

What gear is in the truck? 4.10 or 3.73? (or 4.56 for that matter if a CUCV donor).

3.73 would be fine with 33" tire and no OD and a 4.10 gear works for 35's just fine once again without od. If you have 4.56 the 37's would be OK, but 4.56 and 33's would be a lot for running around on the street. (Although that is the exact combination I am putting together for my '79 CJ5.

And maybe will see you around? Just noticed we are darn near neighbors.
__________________
44 Willys MB
52 M38A1
64 Corvette Coupe
68 Camaro 'vert LT1 & TH700
69 Z/28 355 12.6's @110
69 Chevy Short Step 4 1/2"/7" drop
72 Jimmy 4WD 4spd 4" & 35's
02 GMC 2500HD 4x4 Duramax
Mike C is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:32 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com