4spd Tranny for sale! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

03glide · 02-08-2004, 06:27 PM

4spd, 1st gear granny, bellhousing, clutch, pressure plate, t.o. bearing, and shifter. $50 pick it up. Drove it before the teardown. Shifted fine. Also have clutch/brake pedal setup and z bar if interested.

muddyole 69 · 02-08-2004, 09:48 PM

Hey Brian how soon you coming back up to the great white north ? I will take the tranny bell flywheel etc would take the pedals but already have a couple of sets let me know and I will get you some cash Mike

03glide · 02-08-2004, 09:58 PM

I haven't set a date yet but the wife is ready for a trip home. If you definitely wan't it I would like to get half the money and the other half when I bring it. It will probably be early to mid March. Sound good? or is that too far off.

ps- You should see that title in a couple days. I didn't get it in the mail until Saturday.
Brian

*dtlilly* · 02-08-2004, 10:29 PM

Brian, if Mike don't want it, I'd take it if you are flying here for the fender. I will also take you to Graceland for a complete tour (a $25.00 value).

03glide · 02-08-2004, 11:24 PM

I'll wait to hear from him and let you know.

*dtlilly* · 02-08-2004, 11:48 PM

Thanks, I'm still going to get a quote for shipping the fender Monday. Worst case in mind...do you have a Grey Hound Bus Depot near you?

03glide · 02-09-2004, 12:08 AM

Yes. There is 1 downtown. I have been doing some flight planning and that may be an option if I can talk my wife into spending the night in Memphis. Neither of us have been there before so she may go for it. Fuel for the plane, a hotel, and dinner will cost about 5 times what I'm paying for the fender. However if you can incorporate visiting someplace new and a good time it's worth it. Will talk to her and wait to here from you about shipping.
Brian

muddyole 69 · 02-09-2004, 12:14 AM

I am willing to wait on the stuff how much for the tranny clutch assembly bell and fork and flywheel and I will be happy to send 50% down to you asap Mike

03glide · 02-09-2004, 12:26 AM

Mike. I will include EVERYTHING. Tranny/bellhousing, clutch,pressure plate,t.o bearing, clutch pedal to z bar rod, z bar, rod from z bar to clutch fork, clutch fork, and flywheel for $80. AND!! I will bring it to you free sometime in early to mid March. (sounds like a Saturday morning infommercial). I'll pm you my address. If you want it send me $40 and I'll get the other $40 when I bring it to you.
Brian

*dtlilly* · 02-09-2004, 12:44 AM

Dang, I spend all day on the board, then the minute I go outside to get some work done on the truck, I miss out. Oh well, I really didn't need it (I hope, never had the 72 truck running), I was just looking for a spare, Haha

muddyole 69 · 02-09-2004, 12:46 AM

Sold !!! PM me your address and I will send out the money order asap and thanks Mike

03glide · 02-09-2004, 01:48 AM

dtlilly. I know what you mean. I'm on the board 10-15 times a day and it seems I always JUST miss what I was looking for.

muddyole69-pm sent

02-08-2004, 06:27 PM	#1
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	4spd Tranny for sale! 4spd, 1st gear granny, bellhousing, clutch, pressure plate, t.o. bearing, and shifter. $50 pick it up. Drove it before the teardown. Shifted fine. Also have clutch/brake pedal setup and z bar if interested. Attached Images

02-08-2004, 09:48 PM	#2
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	tranny Hey Brian how soon you coming back up to the great white north ? I will take the tranny bell flywheel etc would take the pedals but already have a couple of sets let me know and I will get you some cash Mike __________________ hav'n fun be'n me

02-09-2004, 12:14 AM	#8
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	tranny I am willing to wait on the stuff how much for the tranny clutch assembly bell and fork and flywheel and I will be happy to send 50% down to you asap Mike __________________ hav'n fun be'n me

02-09-2004, 12:46 AM	#11
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	tranny Sold !!! PM me your address and I will send out the money order asap and thanks Mike __________________ hav'n fun be'n me

02-08-2004, 09:58 PM	#3
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	I haven't set a date yet but the wife is ready for a trip home. If you definitely wan't it I would like to get half the money and the other half when I bring it. It will probably be early to mid March. Sound good? or is that too far off. ps- You should see that title in a couple days. I didn't get it in the mail until Saturday. Brian

02-08-2004, 10:29 PM	#4
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Brian, if Mike don't want it, I'd take it if you are flying here for the fender. I will also take you to Graceland for a complete tour (a $25.00 value).

02-08-2004, 11:24 PM	#5
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	I'll wait to hear from him and let you know.

02-08-2004, 11:48 PM	#6
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Thanks, I'm still going to get a quote for shipping the fender Monday. Worst case in mind...do you have a Grey Hound Bus Depot near you?

02-09-2004, 12:08 AM	#7
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	Yes. There is 1 downtown. I have been doing some flight planning and that may be an option if I can talk my wife into spending the night in Memphis. Neither of us have been there before so she may go for it. Fuel for the plane, a hotel, and dinner will cost about 5 times what I'm paying for the fender. However if you can incorporate visiting someplace new and a good time it's worth it. Will talk to her and wait to here from you about shipping. Brian

02-09-2004, 12:26 AM	#9
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	Mike. I will include EVERYTHING. Tranny/bellhousing, clutch,pressure plate,t.o bearing, clutch pedal to z bar rod, z bar, rod from z bar to clutch fork, clutch fork, and flywheel for $80. AND!! I will bring it to you free sometime in early to mid March. (sounds like a Saturday morning infommercial). I'll pm you my address. If you want it send me $40 and I'll get the other $40 when I bring it to you. Brian

02-09-2004, 12:44 AM	#10
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Dang, I spend all day on the board, then the minute I go outside to get some work done on the truck, I miss out. Oh well, I really didn't need it (I hope, never had the 72 truck running), I was just looking for a spare, Haha

02-09-2004, 01:48 AM	#12
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	dtlilly. I know what you mean. I'm on the board 10-15 times a day and it seems I always JUST miss what I was looking for. muddyole69-pm sent



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.