AZ Cabs for parts/pieces

[t korinek]

Originally Posted by mjgord51

Don't cut the 67 cab I might want the hole complete cab. whats the low down on body rot areas, need more pics of the cab, mjgord51

Mjgord51 your a little late for the party, the 67 cab is just a skeleton now...
Posted via Mobile Device

[t korinek]

72tutone Here's pics of the cab have for parts $100 + shipping for all 4 corners If they will work for you, bottom driver section may be cut a little short, if it is I can get another piece off another cab.

In the Ten Ring Forgot about your cab corner section, do you still need it?

Last pic is whats left of the 67 cab

[72tutone]

Tom, how much just for the top upper left/right cuts to 63385? You just show the upper right patch? Is the cab with the windshield on it the upper left donor patch?
Is the shape and quality the same? I'm a little tight with $ so I might have to get back to you on the lower patches
Thanks, Matt

[72tutone]

Originally Posted by 72tutone

Tom, how much just for the top upper left/right cuts to 63385? You just show the upper right patch? Is the cab with the windshield on it the upper left donor patch?
Is the shape and quality the same? I'm a little tight with $ so I might have to get back to you on the lower patches
Thanks, Matt

Tom-
How much for just the top two windshield cuts left/right shipped to 63385

Thanks,
Matt

[t korinek]

Pics for in the ten ring, floor piece is solid, corner has a dent & some rust coming through down low, $25 + shipping

72tutone $63 shipped for both upper cab pieces

ol67c10, I still have that area of the floor available.

70 stepside, I have a few cabs if you want to come look.

djgebert, missed your post, I have a good low hump area $45 + shipping.

Thanks,
Tom

[djgebert]

Originally Posted by t korinek

Pics for in the ten ring, floor piece is solid, corner has a dent & some rust coming through down low, $25 + shipping

72tutone $63 shipped for both upper cab pieces

ol67c10, I still have that area of the floor available.

70 stepside, I have a few cabs if you want to come look.

djgebert, missed your post, I have a good low hump area $45 + shipping.

Thanks,
Tom

Thanks, I will take the low hump cut. Let me know the full price to 46835 and how to get you paid. Thanks again!

[t korinek]

djgebert, lets figure $25 shipping on this, if its any less I'll refund the difference.

Elliot949, haven't had a chance to check out a floor section yet.

Tilldogg, here's a pic of the area I was going to cut for you.

72 tutone, here's pics of the pieces I have cut for you, these will not fit in a med flat rate box like I had planned,I can trim them until they do or you can pay another $5 to take them like they are in a large flate rate box.
Thanks,
Tom

[In The Ten Ring]

Originally Posted by t korinek

72tutone Here's pics of the cab have for parts $100 + shipping for all 4 corners If they will work for you, bottom driver section may be cut a little short, if it is I can get another piece off another cab.

In the Ten Ring Forgot about your cab corner section, do you still need it?

Last pic is whats left of the 67 cab

Ya I still need it. Can you hook what I have in the pic into a cab corner?