New member suggestions for full custom chassis 1952 Chevy 3100

[Stephenshane237]

I have been wanting to build a Ad truck for sometime so I recently picked up a 1952 Chevy 3100, originally I was going to build a truck from scratch and this one will be close only saving is the cab. I am looking to order a new chassis for this truck I have $ from TCI, art Morrison, roadster shop, and no limit. I also considered doing a bolt together frame from speedway motors but am leaning towards no limit big 10. I will be running a 525hp ls3 in this truck if I go with custom, or 383 with the speedway kit. does anybody on here use any of the chassis hat I am contemplating ?
Posted via Mobile Device

[ghettoluxury]

The Art Morrison chassis is a very nice piece. There is 1 being used on this forum that I know of. Rob and the guys at No Limit make some very nice chassis. He is also a forum member and is very willing to help.

If my budget allowed it would be a toss up between these two. As far as performance goes both of these are top notch. No Limit does use a modified truck arm rear suspension that is very tunable.

[_Ogre]

Stephenshane237 is living the dream...
i think all of us would have enjoyed buying a completed aftermarket frame at one time

all the vendors you mention offer quality goods. though the bolt together frame scares me a bit
all offer the bare frame to a complete painted rolling chassis with plumbed mc and brake lines

[tiddlar]

Originally Posted by Stephenshane237

I have been wanting to build a Ad truck for sometime so I recently picked up a 1952 Chevy 3100, originally I was going to build a truck from scratch and this one will be close only saving is the cab. I am looking to order a new chassis for this truck I have $ from TCI, art Morrison, roadster shop, and no limit. I also considered doing a bolt together frame from speedway motors but am leaning towards no limit big 10. I will be running a 525hp ls3 in this truck if I go with custom, or 383 with the speedway kit. does anybody on here use any of the chassis hat I am contemplating ?
Posted via Mobile Device

I looked into all of them, roadster shop is nothing less than art. Im having a turn chassis built for me.
Moser m9 with 20x15 wheels on back. Triangulated four link and air bags.

[tiddlar]

Tube **

[solidaxel]

Originally Posted by tiddlar

Tube **

Who is your builder?
I would like to take a look at it

[Stephenshane237]

I have narrowed it down to TCI custom IFS and 4 link, and the no limit big 10 I am looking for a good ride but decent handling with the ls3 decisions decisions

[ghettoluxury]

The No Limit Big10 will give you a good ride with great handling.

[Stephenshane237]

thats what I am hoping for and I can get that chassis finished with fuel tank and lines ran for close to the same money as TCI after upgrades

[tiddlar]

Originally Posted by solidaxel

Who is your builder?
I would like to take a look at it

Guilty by design fabrication. Guilty design.net is his parts website. Search guilty by design on facebook. He hasn't started in my chassis yet