MO Front frame horn ends cut off 67 C10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**specialtyretail** · 03-08-2015, 12:06 PM

SOLD,,,, THANKS.... These are the frame horn ends cut off of a 67 C10. I have people asking for these from time to time, decided to whack a pair off. Just what you need to replace that front roll pan with the bumper these trucks were meant to have. Length is approx. 9 1/2 inches. $35.00 shipped if anyone needs them. Thanks, Fred.

Ol 67 C10 · 03-08-2015, 01:27 PM

I'll have to look at my 67 later to see if they're long enough. If so I'll take them. Thanks

Ol 67 C10 · 03-08-2015, 07:56 PM

Here is how mine are cut does it look like they will work? I know the sides will work but not sure about the bottom?

Ol 67 C10 · 03-08-2015, 07:58 PM

Here is how mine are cut, does it look like they will work? I know the sides will work but not sure about the bottom?

**specialtyretail** · 03-08-2015, 08:19 PM

Mine are cut off between the core support rivets. Thanks, Fred.

tonkatrux2 · 03-08-2015, 11:26 PM

I will take them thanks. If you send me your pay pal info will get you paid.

unclefreddy · 03-09-2015, 01:01 AM

Do you have another set ? Thanks

**specialtyretail** · 03-09-2015, 08:45 AM

Quote:

Originally Posted by tonkatrux2

I will take them thanks. If you send me your pay pal info will get you paid.

pm sent. Thanks, Fred.

**specialtyretail** · 03-09-2015, 01:04 PM

Quote:

Originally Posted by unclefreddy

Do you have another set ? Thanks

Right now I do not. That may change by the weekend. Thanks, Fred.

**Todd68Chevy** · 03-09-2015, 03:13 PM

Quote:

Originally Posted by unclefreddy

Do you have another set ? Thanks

Quote:

Originally Posted by specialtyretail

Right now I do not. That may change by the weekend. Thanks, Fred.

Fred if you do not then I might have some. I need to check the condition but I have a 68 frame that I have been cutting on.

**specialtyretail** · 03-09-2015, 03:39 PM

Sure thing Todd. If you can help them out, that would be great. Thanks, Fred.

Ol 67 C10 · 03-09-2015, 04:20 PM

I'll take a set cut behind the radiator support mounts. Thanks!

**specialtyretail** · 03-09-2015, 04:49 PM

Quote:

Originally Posted by Ol 67 C10

I'll take a set cut behind the radiator support mounts. Thanks!

I bet Todd can fix you right up. I will try to remember and cut them a little longer next time. Thanks, Fred.

Ol 67 C10 · 03-09-2015, 04:55 PM

Yours would probably work for most people. PO cut mine with a torch. I don't know why he would have cut the bottom of mine back so far? Thanks

**Todd68Chevy** · 03-09-2015, 10:00 PM

The frame horns on the 68 C20 frame I have look good except a small split at the front of the drivers side. I think it would be an easy weld. I can not get pictures to load but I can text them. I also have a 69 C10 with good frame horns that are nice that I would cut off. It will take a few days before the weather is good enough for me to get them cut off and then I will start my own thread instead of steeling Freds. Thanks

**specialtyretail** · 03-09-2015, 10:16 PM

Todd, no problem with me. Glad you have what he is looking for. Hope you guys can work out a deal. Thanks, Fred.

**Todd68Chevy** · 03-09-2015, 10:27 PM

Quote:

Originally Posted by specialtyretail

Todd, no problem with me. Glad you have what he is looking for. Hope you guys can work out a deal. Thanks, Fred.

Thanks again, Fred.

BugzC10 · 03-22-2015, 02:49 PM

Fred or Todd. I'm going to convert back to a bumper from a roll pan. I need a set for a 70 (I'm assuming 67 thru 72 are all the same?) Let me know either of you will have a set in the near future.
Thanks

72lady · 05-24-2015, 08:06 AM

I also need a pair if anyone has any. Thanks!
Posted via Mobile Device

**Todd68Chevy** · 05-29-2015, 11:54 AM

Quote:

Originally Posted by 72lady

I also need a pair if anyone has any. Thanks!
Posted via Mobile Device

I think Fred is out at the moment but I have this pair still. http://67-72chevytrucks.com/vboard/s...d.php?t=665496

**specialtyretail** · 05-29-2015, 04:39 PM

Quote:

Originally Posted by Todd68Chevy

I think Fred is out at the moment but I have this pair still. http://67-72chevytrucks.com/vboard/s...d.php?t=665496

Hook him up Todd. I am out for now. Thanks, Fred.

03-08-2015, 12:06 PM	#1
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Front frame horn ends cut off 67 C10 SOLD,,,, THANKS.... These are the frame horn ends cut off of a 67 C10. I have people asking for these from time to time, decided to whack a pair off. Just what you need to replace that front roll pan with the bumper these trucks were meant to have. Length is approx. 9 1/2 inches. $35.00 shipped if anyone needs them. Thanks, Fred. Attached Images __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks. Last edited by specialtyretail; 03-09-2015 at 01:05 PM.

03-08-2015, 01:27 PM	#2
Ol 67 C10 Registered User Join Date: Nov 2014 Location: Fulks Run, VA Posts: 206	Re: Front frame horn ends cut off 67 C10 I'll have to look at my 67 later to see if they're long enough. If so I'll take them. Thanks __________________ 67 Chevy Shortbed Fleetside C10 400 SBC/Turbo 350/Posi 62 Impala SS (Clone) 350 SBC/4 Speed/3:36 Posi Rear 2003 Silverado Crew Cab (Black) 2500 HD 4x4/6.0L/Auto/Posi

03-08-2015, 07:56 PM	#3
Ol 67 C10 Registered User Join Date: Nov 2014 Location: Fulks Run, VA Posts: 206	Re: Front frame horn ends cut off 67 C10 Here is how mine are cut does it look like they will work? I know the sides will work but not sure about the bottom? __________________ 67 Chevy Shortbed Fleetside C10 400 SBC/Turbo 350/Posi 62 Impala SS (Clone) 350 SBC/4 Speed/3:36 Posi Rear 2003 Silverado Crew Cab (Black) 2500 HD 4x4/6.0L/Auto/Posi

03-08-2015, 07:58 PM	#4
Ol 67 C10 Registered User Join Date: Nov 2014 Location: Fulks Run, VA Posts: 206	Re: Front frame horn ends cut off 67 C10 Here is how mine are cut, does it look like they will work? I know the sides will work but not sure about the bottom? __________________ 67 Chevy Shortbed Fleetside C10 400 SBC/Turbo 350/Posi 62 Impala SS (Clone) 350 SBC/4 Speed/3:36 Posi Rear 2003 Silverado Crew Cab (Black) 2500 HD 4x4/6.0L/Auto/Posi

03-08-2015, 08:19 PM	#5
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Re: Front frame horn ends cut off 67 C10 Mine are cut off between the core support rivets. Thanks, Fred. __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

03-08-2015, 11:26 PM	#6
tonkatrux2 Registered User Join Date: Mar 2014 Location: springfield mo Posts: 355	Re: Front frame horn ends cut off 67 C10 I will take them thanks. If you send me your pay pal info will get you paid.

03-09-2015, 01:01 AM	#7
unclefreddy Registered User Join Date: Jun 2013 Location: ukiah, california Posts: 333	Re: Front frame horn ends cut off 67 C10 Do you have another set ? Thanks

03-09-2015, 03:39 PM	#11
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Re: Front frame horn ends cut off 67 C10 Sure thing Todd. If you can help them out, that would be great. Thanks, Fred. __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

03-09-2015, 04:20 PM	#12
Ol 67 C10 Registered User Join Date: Nov 2014 Location: Fulks Run, VA Posts: 206	Re: Front frame horn ends cut off 67 C10 I'll take a set cut behind the radiator support mounts. Thanks! __________________ 67 Chevy Shortbed Fleetside C10 400 SBC/Turbo 350/Posi 62 Impala SS (Clone) 350 SBC/4 Speed/3:36 Posi Rear 2003 Silverado Crew Cab (Black) 2500 HD 4x4/6.0L/Auto/Posi

03-09-2015, 04:55 PM	#14
Ol 67 C10 Registered User Join Date: Nov 2014 Location: Fulks Run, VA Posts: 206	Re: Front frame horn ends cut off 67 C10 Yours would probably work for most people. PO cut mine with a torch. I don't know why he would have cut the bottom of mine back so far? Thanks __________________ 67 Chevy Shortbed Fleetside C10 400 SBC/Turbo 350/Posi 62 Impala SS (Clone) 350 SBC/4 Speed/3:36 Posi Rear 2003 Silverado Crew Cab (Black) 2500 HD 4x4/6.0L/Auto/Posi

03-09-2015, 10:00 PM	#15
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: Front frame horn ends cut off 67 C10 The frame horns on the 68 C20 frame I have look good except a small split at the front of the drivers side. I think it would be an easy weld. I can not get pictures to load but I can text them. I also have a 69 C10 with good frame horns that are nice that I would cut off. It will take a few days before the weather is good enough for me to get them cut off and then I will start my own thread instead of steeling Freds. Thanks __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

03-09-2015, 10:16 PM	#16
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Re: Front frame horn ends cut off 67 C10 Todd, no problem with me. Glad you have what he is looking for. Hope you guys can work out a deal. Thanks, Fred. __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

03-22-2015, 02:49 PM	#18
BugzC10 Registered User Join Date: Oct 2012 Location: Green Valley Arizona Posts: 1,351	Re: Front frame horn ends cut off 67 C10 Fred or Todd. I'm going to convert back to a bumper from a roll pan. I need a set for a 70 (I'm assuming 67 thru 72 are all the same?) Let me know either of you will have a set in the near future. Thanks __________________ 1970 C10 Short Stepper with 71/72 front clip.

05-24-2015, 08:06 AM	#19
72lady Registered User Join Date: Aug 2014 Location: SC Posts: 33	Re: Front frame horn ends cut off 67 C10 I also need a pair if anyone has any. Thanks! Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.