1960-62 Front Suspension Upgrade

[Bad61c10]

Originally Posted by Pappyx3!

Bad61c10,

There are 5 bolts on each side of the crossmember that are used to attach the crossmember to the frame. The bolts are located behind the engine mounting brackets. Sorry I can't send you pics to show you. I'm away and don't have pics on my phone.

Yes you can use the rear diff from an 83 C10. The 83 rear end is approx 1 1/2" longer then one used on the 60-62 trucks. You will have remove the axle perches from the 83 rear diff and weld new ones back on. I used perches made by captainfab on this forum to replace mine, and highly recommend them.
Some things to consider when changing to the wider diff are you planning to lower the truck, what type of wheel and size tire are you wanting to put one the back.
Posted via Mobile Device

Yes, I am planning on lowering the truck but not to much as it is my daily driver and I live in Canada and I would like to put 10" wide tires in the back.
Posted via Mobile Device

[Pappyx3!]

Originally Posted by Bad61c10

Yes, I am planning on lowering the truck but not to much as it is my daily driver and I live in Canada and I would like to put 10" wide tires in the back.
Posted via Mobile Device

Do you have a step side or fleet side bed? My truck has been lowered in the rear 3" with lowering springs and I'm using the stock 80's rally's wheels with 255/60/15's and there a pretty tight fit without modifying the fenders.
Posted via Mobile Device

[Bad61c10]

Originally Posted by Pappyx3!

Do you have a step side or fleet side bed? My truck has been lowered in the rear 3" with lowering springs and I'm using the stock 80's rally's wheels with 255/60/15's and there a pretty tight fit without modifying the fenders.
Posted via Mobile Device

It's a stepside
Posted via Mobile Device

[Pappyx3!]

Originally Posted by Bad61c10

It's a stepside
Posted via Mobile Device

We need to see if others can speak to the possibility of getting those 10 inch wheels/tires under it with some backset wheels and or some fender mods.
Posted via Mobile Device

[YatYas]

Nice How to...

I've just installed the crossmember from an 84 C10 to my 66. I used everything from the 84.

The idler arm is way different from my 66. What's the best way to install it? I was just going to mount the steering gear and then drill/mount the idler arm last with eyeball checks... ha sounds kinda ify.

[top dog]

Originally Posted by YatYas

Nice How to...

I've just installed the crossmember from an 84 C10 to my 66. I used everything from the 84.

The idler arm is way different from my 66. What's the best way to install it? I was just going to mount the steering gear and then drill/mount the idler arm last with eyeball checks... ha sounds kinda ify.

Attachment 1422738
Attachment 1422739

Can anyone tell me what year idler arm this is ?

[dave rockwell]

Originally Posted by top dog

Can anyone tell me what year idler arm this is ?

I am wondering what year this idler arm is for as well?
local flaps guys can't find or don't know
thanks