|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-20-2014, 06:04 PM
|
#1 |
|
Registered User
 Join Date: Aug 2014
Location: jefferson hills, pa
Posts: 85
|
1972 Suburban air bags front project
Started this last week. Ordered new ball joints top and bottom. Have the cool ride front kit from air ride tech. Thinking of getting drop spindles now so I don't have to remove spindles later. Has any one used the air bags with the drop spindles? I'm getting the 2.5 inch drop. Brand recommendation?
Thanks Having problem uploading pics. Will try later. |
|
|
|
10-20-2014, 06:11 PM
|
#2 |
|
Registered User
Join Date: Aug 2014
Location: jefferson hills, pa
Posts: 85
|
Re: 1972 Suburban air bags front project
Cleaned up with bump stop removed.
|
|
|
|
|
10-20-2014, 06:39 PM
|
#3 |
|
Prestige Worldwide
Join Date: Feb 2001
Location: Worldwide
Posts: 2,552
|
Re: 1972 Suburban air bags front project
Looks good, welcome to the board and glad to see another Burb!
|
|
|
|
|
10-20-2014, 07:19 PM
|
#4 |
|
Registered User
Join Date: Aug 2014
Location: jefferson hills, pa
Posts: 85
|
Re: 1972 Suburban air bags front project
Before removing bump stop.
|
|
|
|
|
01-12-2015, 08:07 PM
|
#5 |
|
Registered User
Join Date: Aug 2014
Location: jefferson hills, pa
Posts: 85
|
Re: 1972 Suburban air bags front project
A little rust on the passenger side floor turned into inner and outer rocker, part of floor, toe kick and the part that goes below the bottom door hinge. Lots of fitting, but fun to MIG weld.
|
|
|
|
|
01-12-2015, 08:17 PM
|
#6 |
|
Registered User
Join Date: Aug 2014
Location: jefferson hills, pa
Posts: 85
|
Re: 1972 Suburban air bags front project
My favorite pic, pile of old stuff, pile of new stuff trimmed to fit.
|
|
|
|
|
01-13-2015, 08:03 PM
|
#7 |
|
Registered User
Join Date: May 2014
Location: chicago, il
Posts: 1
|
Re: 1972 Suburban air bags front project
Hey Daveiaff,
I'm also starting on '72 Burb. Considering using Accuair Stage 2 e-level kit, color ride front and rear and cool ride shocks. My biggest obstacle is notching the frame. Do you have any thoughts on this? Is it worth the hassle? Thanks. |
|
|
|
|
01-16-2015, 08:32 AM
|
#8 |
|
Registered User
Join Date: Aug 2014
Location: jefferson hills, pa
Posts: 85
|
Re: 1972 Suburban air bags front project
When the rear bags are down on mine the axle is touching the frame. I'm going to notch the frame myself with some pipe and plate. I've repaired rusted frames in the past, so I have experience with stick and mig welding. There are bolt in kits out there, but I'm going for a cleaner look. As mine sits now it is level. When I get the drop spindles, I'll match the C in rear frame to match, I just have to make sure there is some drop left in the air bags. I don't want to go with a larger c, the wood floor is in great shape and I don't want to disturb it. Also the fuel lines run down the passenger side of the inner frame on a burb , so that is another step that wouldn't apply to a truck c notch
|
|
|
|
|
01-17-2015, 07:06 PM
|
#9 |
|
C10 Club Tennessee
Join Date: Mar 2003
Location: White House, TN 37188
Posts: 8,281
|
Re: 1972 Suburban air bags front project
Dave, to get a little lower you should cut out the cup on the lower control arm.
__________________
Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4 |
|
|
|
|
04-10-2015, 06:02 PM
|
#10 |
|
Registered User
Join Date: Aug 2014
Location: jefferson hills, pa
Posts: 85
|
Re: 1972 Suburban air bags front project
Parts burb. Excellent barn doors. Runs and stops. 350 4 bolt mains.
|
|
|
|
|
04-10-2015, 06:06 PM
|
#11 |
|
Registered User
Join Date: Aug 2014
Location: jefferson hills, pa
Posts: 85
|
Re: 1972 Suburban air bags front project
On bags all 4 corners. Drop spindles are in, just have to install. Photo in above post is one that I found 2 hours away. Picked up today.
|
|
|
|
|
04-10-2015, 06:54 PM
|
#12 |
|
Senior Member
Join Date: Jul 2012
Location: Oblong, Illinois
Posts: 7,028
|
Re: 1972 Suburban air bags front project
Looks good. Nice find on the parts Burb. Is it too rough for someone to save?
|
|
|
|
|
05-23-2015, 09:44 AM
|
#13 |
|
Registered User
Join Date: Aug 2014
Location: jefferson hills, pa
Posts: 85
|
Re: 1972 Suburban air bags front project
Found a good spot for the dual air compressors and tank,
|
|
|
|
|
05-23-2015, 09:48 AM
|
#14 |
|
Registered User
Join Date: Aug 2014
Location: jefferson hills, pa
Posts: 85
|
Re: 1972 Suburban air bags front project
ECE 2.5 drop spindles - 20x8 Salt Flats - just in, test drive out of garage 10'.
|
|
|
|
|
05-29-2015, 04:43 PM
|
#15 |
|
Registered User
Join Date: Aug 2014
Location: jefferson hills, pa
Posts: 85
|
Re: 1972 Suburban air bags front project
Rack mounted.
|
|
|
|
|
06-04-2015, 08:30 PM
|
#16 |
|
Registered User
Join Date: Aug 2014
Location: jefferson hills, pa
Posts: 85
|
Re: 1972 Suburban air bags front project
Fenders back on.
|
|
|
|
|
06-05-2015, 05:13 PM
|
#17 |
|
Registered User
Join Date: Aug 2014
Location: jefferson hills, pa
Posts: 85
|
Re: 1972 Suburban air bags front project
Slowly coming back together.
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
