KS Brushguard F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 04-04-2015, 08:59 AM

Not sure if this is a factory GM brushguard or after market, and not sure of original application. Could be modified I'm sure with a bit of welding. Can not find any markings or stampings. It is heavy and in good shape other than needs a repaint. Has a built in slight bow or angle in to the center by about 1'', as in not flat across the front edge. Would prefer local sale but can ship but not sure what the cost would be. It's heavy. $125 plus ship if need be. Have UPS locally. Money order or $$, as do not have Paypal.

**Ironhorse** · 04-06-2015, 06:06 PM

Solid and well built. $125 plus shipping, $$ or money order, do not have Paypal. Prefer local pickup but will ship at buyer's expense.

oldertruckfan · 04-06-2015, 06:47 PM

I'm thinking it might be a Luverne or Dee Zee aftermarket cow catcher. it looks a lot like the one we bought for our feed lot truck. It's been a long time ago though, so I could be wrong.

**Ironhorse** · 04-07-2015, 08:43 AM

Thanks for the reply on a possible mfg. Will look it over again for marks or stampings but so far have not found any.

**Ironhorse** · 04-10-2015, 05:36 PM

Bump, have not found any mfg. marks but does not look to be home made. Nice, solid unit $125 plus shipping or local pickup/possible deliver. Money order or $$ only, do not have Paypal.

**Ironhorse** · 04-11-2015, 08:24 AM

bump ttt

In The Ten Ring · 04-11-2015, 12:23 PM

It may not have markings to find. I have a Luverne grill guard and all it has is a sticker.

I think these are great accessories. Imagine how much you'd wish you had one if you hit a deer.

RedRoad · 04-11-2015, 01:43 PM

in this thread this one is stated to be a dealer installed Luverne GMC guard that looks VERY similar to yours. Looks like yours would be a Chevy dealer install. Wish you were closer, what do you think the shipping would be to 91342?

http://www.67-72chevytrucks.com/vboa...d.php?t=665978

Quote:

Originally Posted by BLAZERMAN

GMC dealer accessory brush guard

**Ironhorse** · 04-11-2015, 04:09 PM

RedRoad, give me a couple days to talk to UPS and see what shipping costs would be. Most likely would have to wrap in cardboard which is not a problem other than a bit of time and a bit of tape/cardboard. Will get back with you, out of town Monday, will be Tues. or Weds. before I can get back to you. I agree, this one looks VERY similar as the one in the pic from Blazerman, just don't want to go out on a limb and say it is a dealer installed Luverne as I have no way to prove it.

**Ironhorse** · 04-13-2015, 05:33 PM

ReadRoad, using UPS, 85 lb. package to your door shipping is $125. Shipping and the brush guard total to your door would be $250. Anything over my estimated quote from the UPS counter using measurements of 76'' long, 25'' wide (top of guard to bottom of mounting leg, UPS measurements and 6'' tall I will cover from the sale and adjust brush guard price accordingly to stay wihin the $250 total to your door, guaranteed cost of $250 delivered. Understand the shipping $$ is same as the guard but it is HEAVY and BIG, LOL. Let me know if interested and thanks for the inquiry.

In The Ten Ring · 04-14-2015, 12:00 AM

I love brushguards but I already have one and I have not put it onto my truck. I don't expect you to just give it away and shipping will not be cheap no matter what.

RedRoad · 04-14-2015, 12:52 AM

Ill take it.

PM sent

**Ironhorse** · 04-14-2015, 11:30 AM

PM replied, sale pending.

RedRoad · 04-14-2015, 07:26 PM

Its my fault that I will reluctantly have to pass on this purchase at this time.

The seller went out of his way to make this sale happen and Im sure the person who steps up and buys this piece will have a smooth transaction on this awesome accessory!

**Ironhorse** · 04-14-2015, 10:57 PM

RedRoad passes so the brush guard is back up for sale, still available, $125 plus shipping. Money order or $$ only, do not have Paypa. Prefer local
pick-up or possible delivery.

**Ironhorse** · 04-22-2015, 01:58 PM

Not sure of original application but can be modified to fit most anything with a bit of welding. Asking $125 plus shipping but prefer local pickup or delivery. Can ship via UPS, cardboard wrapped but it is heavy. Money order or $$, do not have Paypal.

**Ironhorse** · 06-06-2015, 10:33 AM

Still have this brushguard, $125 plus shipping, or local pickup or possible deliver locally. Money order or $$ only, do not have Paypal.

04-04-2015, 08:59 AM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,146	Brushguard F/S Not sure if this is a factory GM brushguard or after market, and not sure of original application. Could be modified I'm sure with a bit of welding. Can not find any markings or stampings. It is heavy and in good shape other than needs a repaint. Has a built in slight bow or angle in to the center by about 1'', as in not flat across the front edge. Would prefer local sale but can ship but not sure what the cost would be. It's heavy. $125 plus ship if need be. Have UPS locally. Money order or $$, as do not have Paypal. Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks Last edited by Ironhorse; 04-06-2015 at 06:03 PM.

04-06-2015, 06:06 PM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,146	Re: Brushguard F/S Solid and well built. $125 plus shipping, $$ or money order, do not have Paypal. Prefer local pickup but will ship at buyer's expense. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

04-06-2015, 06:47 PM	#3
oldertruckfan Registered User Join Date: Mar 2014 Location: Spring Hill Kansas Posts: 209	Re: Brushguard F/S I'm thinking it might be a Luverne or Dee Zee aftermarket cow catcher. it looks a lot like the one we bought for our feed lot truck. It's been a long time ago though, so I could be wrong.

04-07-2015, 08:43 AM	#4
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,146	Re: Brushguard F/S Thanks for the reply on a possible mfg. Will look it over again for marks or stampings but so far have not found any. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

04-10-2015, 05:36 PM	#5
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,146	Re: Brushguard F/S Bump, have not found any mfg. marks but does not look to be home made. Nice, solid unit $125 plus shipping or local pickup/possible deliver. Money order or $$ only, do not have Paypal. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

04-11-2015, 08:24 AM	#6
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,146	Re: Brushguard F/S bump ttt __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

04-11-2015, 12:23 PM	#7
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,421	Re: Brushguard F/S It may not have markings to find. I have a Luverne grill guard and all it has is a sticker. I think these are great accessories. Imagine how much you'd wish you had one if you hit a deer.

04-11-2015, 04:09 PM	#9
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,146	Re: Brushguard F/S RedRoad, give me a couple days to talk to UPS and see what shipping costs would be. Most likely would have to wrap in cardboard which is not a problem other than a bit of time and a bit of tape/cardboard. Will get back with you, out of town Monday, will be Tues. or Weds. before I can get back to you. I agree, this one looks VERY similar as the one in the pic from Blazerman, just don't want to go out on a limb and say it is a dealer installed Luverne as I have no way to prove it. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

04-13-2015, 05:33 PM	#10
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,146	Re: Brushguard F/S ReadRoad, using UPS, 85 lb. package to your door shipping is $125. Shipping and the brush guard total to your door would be $250. Anything over my estimated quote from the UPS counter using measurements of 76'' long, 25'' wide (top of guard to bottom of mounting leg, UPS measurements and 6'' tall I will cover from the sale and adjust brush guard price accordingly to stay wihin the $250 total to your door, guaranteed cost of $250 delivered. Understand the shipping $$ is same as the guard but it is HEAVY and BIG, LOL. Let me know if interested and thanks for the inquiry. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

04-14-2015, 12:00 AM	#11
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,421	Re: Brushguard F/S I love brushguards but I already have one and I have not put it onto my truck. I don't expect you to just give it away and shipping will not be cheap no matter what.

04-14-2015, 12:52 AM	#12
RedRoad Registered User Join Date: Jan 2015 Location: Los Angeles California Posts: 927	Re: Brushguard F/S Ill take it. PM sent Last edited by RedRoad; 04-14-2015 at 04:37 PM. Reason: sold

04-14-2015, 11:30 AM	#13
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,146	Re: Brushguard F/S PM replied, sale pending. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

04-14-2015, 07:26 PM	#14
RedRoad Registered User Join Date: Jan 2015 Location: Los Angeles California Posts: 927	Re: Brushguard F/S Its my fault that I will reluctantly have to pass on this purchase at this time. The seller went out of his way to make this sale happen and Im sure the person who steps up and buys this piece will have a smooth transaction on this awesome accessory!

04-14-2015, 10:57 PM	#15
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,146	Re: Brushguard F/S RedRoad passes so the brush guard is back up for sale, still available, $125 plus shipping. Money order or $$ only, do not have Paypa. Prefer local pick-up or possible delivery. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

04-22-2015, 01:58 PM	#16
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,146	Re: Brushguard F/S Not sure of original application but can be modified to fit most anything with a bit of welding. Asking $125 plus shipping but prefer local pickup or delivery. Can ship via UPS, cardboard wrapped but it is heavy. Money order or $$, do not have Paypal. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks



Register or Log In To remove these advertisements.

06-06-2015, 10:33 AM	#17
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,146	Re: Brushguard F/S Still have this brushguard, $125 plus shipping, or local pickup or possible deliver locally. Money order or $$ only, do not have Paypal. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

Register or Log In To remove these advertisements.