Best prices on wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mator · 06-08-2015, 04:47 PM

I have searched and only came up with a group buy that's been over for a long time. Who on the forum has the best wheel deals? Looking for help on 6 lug Torque thrust St's or similar. As most, looking for 18" or 20s with a 8 and 10 width to fit a 3 - 6 drop on a step side without rubbing. Does that sound a right? Thanks

Mator · 06-09-2015, 02:04 PM

Well since no reply let me ask it another way.

What are my options for chrome or aluminum wheels that still maintain my 6 lug fitment and will fit my 67 step without breaking the bank and who sells them?

cdowns · 06-09-2015, 02:26 PM

Go tothe larger swapmeets in the area with cash and a ruler to find a deal on nnice set of wheels that's the way i go

bs46488 · 06-09-2015, 02:36 PM

For 6 lugs, I've seen some cool trucks with newer truck take off wheels. I've also noticed you can get some pretty good deals with people that are trying to sell take off factory wheels because they went aftermarket.

I've never checked 6 lugs, but this place has a couple of 5 lugs that I might do:

http://www.performanceplustire.com

**leddzepp** · 06-09-2015, 03:18 PM

Americas Tire or Discount Tire will match any price and can get just about any wheel you want.

C10_ustacould · 06-09-2015, 03:27 PM

Vendor/Member ksbrktracer has a large selection of wheels available, PM him he'll hook you up.

Mator · 06-09-2015, 04:55 PM

Now that's what I am talking about. Thank you everyone. Good ideas

Mator · 06-09-2015, 05:00 PM

Quote:

Originally Posted by Bucks68

Vendor/Member ksbrktracer has a large selection of wheels available, PM him he'll hook you up.

ksbrktracer inbox is full. Maybe he will see this thread. Thanks again.

C10_ustacould · 06-09-2015, 05:38 PM

Quote:

Originally Posted by Mator

ksbrktracer inbox is full. Maybe he will see this thread. Thanks again.

Text or Call 918-845-1935 and ask for Tommy

clemsonteg · 06-09-2015, 07:43 PM

Depends on how much work you want to do. I picked up a set of Torq Thrust STs on eBay for $400. The clear coat was peeling on the machined lips, so I stripped it off and polished them. I also had to use a router and rabbetting bit to enlarge the bore on the wheels to fit over the hubs.
Before

After

Before

After

Mator · 06-09-2015, 08:10 PM

Wow, that sucks. Not looking for that kind of hassle.

clemsonteg · 06-09-2015, 08:17 PM

Quote:

Originally Posted by Mator

Wow, that sucks. Not looking for that kind of hassle.

The polishing was worth the work. I am not sure if all trucks are the same, but the hub bore on the wheels was too small to fit the truck which would lead to either the mod I did, or using spacers.

**screaminchevypickup** · 06-09-2015, 09:01 PM

What brand of wheels are you looking for? We carry several different brands.

Kyle

kingstrider · 06-10-2015, 05:08 AM

Quote:

Originally Posted by clemsonteg

Depends on how much work you want to do. I picked up a set of Torq Thrust STs on eBay for $400. The clear coat was peeling on the machined lips, so I stripped it off and polished them. I also had to use a router and rabbetting bit to enlarge the bore on the wheels to fit over the hubs.
Before

After

Before

After

Not trying to hijack the thread but I'd like to see the template you used for your router. Nice work on these!

Mator · 06-10-2015, 07:42 AM

Looking at Torque thrust St's or similar. Not sure what I need to fit the 6 lug on a 67. Where do you start?

C10_ustacould · 06-10-2015, 08:01 AM

Quote:

Originally Posted by screaminchevypickup

What brand of wheels are you looking for? We carry several different brands.

Kyle

Quote:

Originally Posted by Mator

Looking at Torque thrust St's or similar. Not sure what I need to fit the 6 lug on a 67. Where do you start?

Well, Kyle have offered to help just let him know what youare interested in and let him do the leg work. I'm sure he can offer several options.

clemsonteg · 06-10-2015, 10:11 AM

Quote:

Originally Posted by kingstrider

Not trying to hijack the thread but I'd like to see the template you used for your router. Nice work on these!

No template required. I used a rabbetting bit. It has a bearing which acts as a guide to allow a certain depth of cut. For my case, the bit was 1.5" wide and I used a 1" bearing to give a 1/4" cut all the way around effectively increasing the bore of the wheel 1/2".

http://youtu.be/RmpohBl0kVQ

clemsonteg · 06-10-2015, 10:21 AM

Quote:

Originally Posted by Mator

Looking at Torque thrust St's or similar. Not sure what I need to fit the 6 lug on a 67. Where do you start?

The first thing I did was remove the wheels I had on my truck and use a set of calipers to measure the hubs on front and rear of my truck. You can then use that to find a set of wheels that meet the specs you need.

You could also disregard the bore and buy a set of bolt on spacers. Just keep in mind that has to be factored into your backspace if added. With my set up, I ended up adding spacers in the rear anyways to have enough clearance thought my suspension travel with bags. Depending on you rear end width, you may or may not need spacers with the Torq thrust st's.

06-08-2015, 04:47 PM	#1
Mator Registered User Join Date: Jan 2013 Location: Clinton Iowa Posts: 337	Best prices on wheels I have searched and only came up with a group buy that's been over for a long time. Who on the forum has the best wheel deals? Looking for help on 6 lug Torque thrust St's or similar. As most, looking for 18" or 20s with a 8 and 10 width to fit a 3 - 6 drop on a step side without rubbing. Does that sound a right? Thanks

06-09-2015, 02:04 PM	#2
Mator Registered User Join Date: Jan 2013 Location: Clinton Iowa Posts: 337	Re: Best prices on wheels Well since no reply let me ask it another way. What are my options for chrome or aluminum wheels that still maintain my 6 lug fitment and will fit my 67 step without breaking the bank and who sells them?

06-09-2015, 02:26 PM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Best prices on wheels Go tothe larger swapmeets in the area with cash and a ruler to find a deal on nnice set of wheels that's the way i go __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

06-09-2015, 02:36 PM	#4
bs46488 Registered User Join Date: May 2014 Location: San Diego, CA Posts: 547	Re: Best prices on wheels For 6 lugs, I've seen some cool trucks with newer truck take off wheels. I've also noticed you can get some pretty good deals with people that are trying to sell take off factory wheels because they went aftermarket. I've never checked 6 lugs, but this place has a couple of 5 lugs that I might do: http://www.performanceplustire.com

06-09-2015, 03:18 PM	#5
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,995	Re: Best prices on wheels Americas Tire or Discount Tire will match any price and can get just about any wheel you want. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

06-09-2015, 03:27 PM	#6
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,870	Re: Best prices on wheels Vendor/Member ksbrktracer has a large selection of wheels available, PM him he'll hook you up. __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

06-09-2015, 04:55 PM	#7
Mator Registered User Join Date: Jan 2013 Location: Clinton Iowa Posts: 337	Re: Best prices on wheels Now that's what I am talking about. Thank you everyone. Good ideas

06-09-2015, 07:43 PM	#10
clemsonteg Registered User Join Date: Jul 2012 Location: Anderson,SC Posts: 953	Re: Best prices on wheels Depends on how much work you want to do. I picked up a set of Torq Thrust STs on eBay for $400. The clear coat was peeling on the machined lips, so I stripped it off and polished them. I also had to use a router and rabbetting bit to enlarge the bore on the wheels to fit over the hubs. Before After Before After

06-09-2015, 08:10 PM	#11
Mator Registered User Join Date: Jan 2013 Location: Clinton Iowa Posts: 337	Re: Best prices on wheels Wow, that sucks. Not looking for that kind of hassle.

06-09-2015, 09:01 PM	#13
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: Best prices on wheels What brand of wheels are you looking for? We carry several different brands. Kyle __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

06-10-2015, 07:42 AM	#15
Mator Registered User Join Date: Jan 2013 Location: Clinton Iowa Posts: 337	Re: Best prices on wheels Looking at Torque thrust St's or similar. Not sure what I need to fit the 6 lug on a 67. Where do you start?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.