What Panhead Bar/Mount are you using? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

vin63 · 06-11-2015, 03:22 PM

A long time ago, I fabricated and welded my own bracket on the back of the passenger side trailing arm combined with an adjustable track/panhard bar that I also fabricated. Then a few years later, Early Classic started offering this brilliant kit: http://www.earlyclassic.com/catalog....20track%20bars

I would just go with the Early Classic kit.

Pappyx3! · 06-11-2015, 04:14 PM

Quote:

Originally Posted by vin63

A long time ago, I fabricated and welded my own bracket on the back of the passenger side trailing arm combined with an adjustable track/panhard bar that I also fabricated. Then a few years later, Early Classic started offering this brilliant kit: http://www.earlyclassic.com/catalog....20track%20bars

I would just go with the Early Classic kit.

Thanks VIN 63 for the suggestion. That kit certainly looks simple enough to install.

I seen a thread where Porterbuilt had a track bar that mounted to the trailing arm(s) but the pics weren't detailed enough for me to see all the contact points and mounts. Anyone used there kits? Any pics of one installed?

Thanks

naynay · 06-11-2015, 04:25 PM

not the best pic, but my PB bar is mounted outside the frame rail on drivers side, and to the trailing arm on the passenger side.

**slepysal** · 06-11-2015, 04:26 PM

I went with a similar kit from CPP.

oldtrux · 06-11-2015, 08:04 PM

Name: IMG_1195.jpg
Views: 261
Size: 40.9 KB

this one is from early classic(if you have a fat diff cover)

06-11-2015, 03:22 PM	#1
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,262	Re: What Panhead Bar/Mount are you using? A long time ago, I fabricated and welded my own bracket on the back of the passenger side trailing arm combined with an adjustable track/panhard bar that I also fabricated. Then a few years later, Early Classic started offering this brilliant kit: http://www.earlyclassic.com/catalog....20track%20bars I would just go with the Early Classic kit. __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes

06-11-2015, 04:25 PM	#3
naynay Registered User Join Date: May 2007 Location: Frisco, TX Posts: 80	Re: What Panhead Bar/Mount are you using? not the best pic, but my PB bar is mounted outside the frame rail on drivers side, and to the trailing arm on the passenger side.

06-11-2015, 04:26 PM	#4
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: What Panhead Bar/Mount are you using? I went with a similar kit from CPP. __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

06-11-2015, 08:04 PM	#5
oldtrux Registered User Join Date: Jul 2010 Location: Bancroft, ontario Posts: 555	Re: What Panhead Bar/Mount are you using? this one is from early classic(if you have a fat diff cover)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.