Swap mount bolt on and go! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

H20cooled · 06-25-2015, 07:46 PM

I did the same as Chuck with 73+ stands. I bought a set from eBay for cheap, sand blasted them and painted and put in new Poly mounts.

I did have to drill 2 holes in the frame to get them to work but it was easy.

For oil pan I used a Cadilac CTSV pan that I bought from eBay as well with a new pickup tube and gasket. This pan worked great and its above the crossmember.

For the Dirty Dingo sliders go to their website and get the ones for the 73+ truck that slide. Thats it.

06-25-2015, 07:46 PM	#10
H20cooled Registered User Join Date: Sep 2014 Location: Milwaukie, OR Posts: 223	Re: Swap mount bolt on and go! I did the same as Chuck with 73+ stands. I bought a set from eBay for cheap, sand blasted them and painted and put in new Poly mounts. I did have to drill 2 holes in the frame to get them to work but it was easy. For oil pan I used a Cadilac CTSV pan that I bought from eBay as well with a new pickup tube and gasket. This pan worked great and its above the crossmember. For the Dirty Dingo sliders go to their website and get the ones for the 73+ truck that slide. Thats it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.