OR Parting 1986 Suburban K20 4x4

[Krex]

I am looking for all brake parts knuckles out from a front Dana 44 what do you have shipped to 75023

[aotte1]

Need
1). two Silverado Kick panels for 1986 C10, prefer black but will consider other colors too.

2). 1984 to 87 dash bezel non A/C preferred, will consider A/C one also.

Would like in very good to excellent condition please.

Got a bunch of stuff a while back, did I deal with John then?

Thanks,
Les

[aotte1]

Follow-up on dash bezel will send you photo of needed one later today.

Also need outer seat belt bolt escussion cover where it bolts to floor.
Photo attached. Mine has attaching tab broken.

Les

[DLTruck1973]

Originally Posted by aotte1

Need
1). two Silverado Kick panels for 1986 C10, prefer black but will consider other colors too.

2). 1984 to 87 dash bezel non A/C preferred, will consider A/C one also.

Would like in very good to excellent condition please.

Got a bunch of stuff a while back, did I deal with John then?

Thanks,
Les

Hi Les,

That would have been Thomas (myself) or Tom that helped you before but probably me.

No on the kick panels . I have nothing in any color that is in great condition at this time.

I do have a 84-87 non AC bezel but it does have some chrome wear off around the gauge holes. I would need $50.00 but it is not perfect.

Let me know,
Thank you,
Thomas

[aotte1]

Thomas,
Dash bezel- Is it easy to post a photo please. Is it in good condition except for the missing chrome? Looking for a nice one to match the other dash insert piece I received from you.

Also need the two sway bar brackets that are riveted to the frame for my 86' truck, they are kind of odd/ angle shaped, non semetrical.

Anything on the outer floor seat belt cover- photo above?

Les

[DLTruck1973]

Originally Posted by aotte1

Thomas,
Dash bezel- Is it easy to post a photo please. Is it in good condition except for the missing chrome? Looking for a nice one to match the other dash insert piece I received from you.

Also need the two sway bar brackets that are riveted to the frame for my 86' truck, they are kind of odd/ angle shaped, non semetrical.

Anything on the outer floor seat belt cover- photo above?

Les

Hi Les,

Here are photos of the bezel. Not the greatest condition but no cracks anywhere.

I have the brackets you need for $50.00 for the pair. I will need to get them removed from a truck we have here. I do not have anything loose currently. These brackets are riveted to the cross member near the frame rails correct?

I believe they would be correct for an 81-87 K10 pick up or 81-91 suburban/blazer?

Nothing on the seat belt cover.

Let me know and I can figure out shipping for everything.

Thank you,
Thomas

[aotte1]

Thomas,

sent PM

Les