What Mounts Work With These BBC Stands? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironangel** · 06-30-2015, 08:01 AM

I'm dropping a 1969 396 into a 72 C-10 chassis. What mounts do I need for these stands? Thanks, I'm a bit confused...

**LockDoc** · 06-30-2015, 08:28 AM

-
Any '67-'71 V-8 engine side mounts will work with those. The only difference in the frame brackets is the dip at the top to clear the BB exhaust manifolds.

LockDoc

**Ironangel** · 06-30-2015, 10:38 AM

Quote:

Originally Posted by LockDoc

-
Any '67-'71 V-8 engine side mounts will work with those. The only difference in the frame brackets is the dip at the top to clear the BB exhaust manifolds.

LockDoc

Cool, thank you Leon! I noticed my SBC 3-bolt block mounts bolt right up to the 396 block. So these stands work just like the small block stands and mounts on a 72? Looks like a larger hole in the BB stands so I'm assuming a large washer will be needed as well? Thanks again, I went ahead and pulled the trigger for $115 dollars shipped on those stands.

**john** · 06-30-2015, 02:29 PM

As lockdoc says any will work, but the originals look like this pic. There is also a lower pad and a sleeve on the bolt like body mounts. I think they are expensive if you find them.

**70STOVEBOLT** · 06-30-2015, 07:50 PM

A lot of guys use small block mounts with those stands. Like you said it will take a big washer also. I am using the rubber blocks, bolts, and sleeves from my 6 cyl manual trans mounts, the fit right into the BB stands. The big block mounts are very expensive, or so I hear...

SS Tim · 06-30-2015, 09:25 PM

The Truck Shop carries the factory style 68-71 mount assemblies.

SS Tim · 06-30-2015, 09:47 PM

Just to keep things clear. Here are the correct, one year only, safety mounts and stands for a 1972 factory big block installation.

**Ironangel** · 07-01-2015, 01:43 PM

Thanks for the reply's. I've already sprung for the pre-72 stands, I think I can engineer a polyurethane sandwich to lock a small block mount to the stands. Thanks again, and I'm getting a better understanding of what applies to what year. ~Michael~

06-30-2015, 08:01 AM	#1
Ironangel Senior Member Join Date: Feb 2010 Location: Falls City, Nebraska "100 Miles From Nowhere" Posts: 2,219	What Mounts Work With These BBC Stands? I'm dropping a 1969 396 into a 72 C-10 chassis. What mounts do I need for these stands? Thanks, I'm a bit confused... __________________ Michael of the clan Hill, "Two Seventy Two's" 71 1-ton Dually 350 4-Speed 71 C/50 Grain Truck, 350 Split-Axle 4-Speed 02 3/4 ton Express 14 Indian Chief Vintage 1952 Ford 8N, "Only Ford Allowed On The Property" "Be American, Buy American"

06-30-2015, 08:28 AM	#2
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 26,065	Re: What Mounts Work With These BBC Stands? - Any '67-'71 V-8 engine side mounts will work with those. The only difference in the frame brackets is the dip at the top to clear the BB exhaust manifolds. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

06-30-2015, 02:29 PM	#4
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Re: What Mounts Work With These BBC Stands? As lockdoc says any will work, but the originals look like this pic. There is also a lower pad and a sleeve on the bolt like body mounts. I think they are expensive if you find them. Attached Images __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

06-30-2015, 07:50 PM	#5
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,538	Re: What Mounts Work With These BBC Stands? A lot of guys use small block mounts with those stands. Like you said it will take a big washer also. I am using the rubber blocks, bolts, and sleeves from my 6 cyl manual trans mounts, the fit right into the BB stands. The big block mounts are very expensive, or so I hear... __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

06-30-2015, 09:25 PM	#6
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,507	Re: What Mounts Work With These BBC Stands? The Truck Shop carries the factory style 68-71 mount assemblies. Attached Images __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

06-30-2015, 09:47 PM	#7
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,507	Re: What Mounts Work With These BBC Stands? Just to keep things clear. Here are the correct, one year only, safety mounts and stands for a 1972 factory big block installation. Attached Images __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

07-01-2015, 01:43 PM	#8
Ironangel Senior Member Join Date: Feb 2010 Location: Falls City, Nebraska "100 Miles From Nowhere" Posts: 2,219	Re: What Mounts Work With These BBC Stands? Thanks for the reply's. I've already sprung for the pre-72 stands, I think I can engineer a polyurethane sandwich to lock a small block mount to the stands. Thanks again, and I'm getting a better understanding of what applies to what year. ~Michael~ __________________ Michael of the clan Hill, "Two Seventy Two's" 71 1-ton Dually 350 4-Speed 71 C/50 Grain Truck, 350 Split-Axle 4-Speed 02 3/4 ton Express 14 Indian Chief Vintage 1952 Ford 8N, "Only Ford Allowed On The Property" "Be American, Buy American"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.