dynomax ceramic coated headers 4sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lost wages · 02-07-2004, 05:58 AM

these are new but may have a few scratches from installing thm, i bought the wrong ones, these are for a chevelle but i wanted the chevelle shorty headers. they fit in the truck ok. i paid 230 for these and will take 190 shipped to your door.

**JDL** · 02-07-2004, 12:30 PM

Do you have the part # Just woundering what size they are

lost wages · 02-07-2004, 04:12 PM

WLK-86001 from summit racing

70 Jimmy · 02-07-2004, 09:50 PM

Curious about why you don't want them. I've got the Chevelle for my BBC and they seem to fit fine and tuck very well.

cochran63 · 02-08-2004, 01:45 AM

can you send me some close up pictures of the scratces? I am interested

**JDL** · 02-08-2004, 02:17 AM

I was looking for some a littel bigger Thanks.

lost wages · 02-08-2004, 03:23 AM

i can get pics in a week or so after i get my new headers on and these off, i dont know if they are scratched but if youve ever installed headers you will likely scratch them. when i get them off ill check closer to see any damage. I dont want them because the doughnut flange lays on the ground when the truck ia lowered, i dont want to drag it when i have the bags dumped.

lost wages · 02-08-2004, 04:22 PM

sale pending

lost wages · 02-09-2004, 11:42 AM

ok, these are still for sale.

lost wages · 02-10-2004, 04:19 AM

got them removed tonight, need these gone, anyone go to chevelle boards? thanks

03glide · 02-10-2004, 04:59 PM

Are there any fitment problems in the truck or are they just NOT what you wanted? Are the first pics(blue frame) and the last pics(silver frame) the same truck. I just want to make sure I wouldn't have any issues installing these in my truck.

krazy_texan · 02-10-2004, 06:05 PM

what size are the flanges on the ends i am interested if you could wait for 2 weeks or a trade of parts let me know i need a new set for my GMC

Smooth68 · 02-10-2004, 06:12 PM

E03glide - Earlier post from lost wages....

Quote:

Originally posted by lost wages
I dont want them because the doughnut flange lays on the ground when the truck ia lowered, i dont want to drag it when i have the bags dumped.

03glide · 02-10-2004, 06:43 PM

I guess I overlooked that. Thanks

lost wages · 02-11-2004, 03:56 AM

they fit ok, bout like most headers they are tight, i had them in the 6 position so i am not sure how well they will fit farther forward, might need to shave a little off the frame in one spot, nothing major. Im not sure how thick the flanges are, ill go look.

lost wages · 02-11-2004, 04:05 AM

the blue frame and the silver are the same one, i had a change of plans in the middle of the build up of this truck, The flanges are 3/8 thick. If you buy these and are not happy with fit i will refund the price you paid. I just ask that you pay shipping to return them. thanks.

03glide · 02-12-2004, 02:23 PM

pm sent

03glide · 02-13-2004, 06:22 PM

did you get the pm

02-07-2004, 05:58 AM	#1
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	dynomax ceramic coated headers 4sale these are new but may have a few scratches from installing thm, i bought the wrong ones, these are for a chevelle but i wanted the chevelle shorty headers. they fit in the truck ok. i paid 230 for these and will take 190 shipped to your door. Attached Images

02-07-2004, 12:30 PM	#2
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,839	Do you have the part # Just woundering what size they are __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

02-07-2004, 09:50 PM	#4
70 Jimmy aka Crusher, Crushergmc Join Date: Mar 2000 Location: Oregon Posts: 1,834	Curious about why you don't want them. I've got the Chevelle for my BBC and they seem to fit fine and tuck very well. __________________ "KEEP IT DOWN!" 70 Jimmy 454 2wd 56 GMC Big Window "It's funny till someone gets hurt, then it's freakin' hilarious"

02-08-2004, 01:45 AM	#5
cochran63 Registered User Join Date: Jan 2004 Location: Oklahoma Posts: 1,057	can you send me some close up pictures of the scratces? I am interested __________________ Youth soon passes away, but immaturity can last a life time.

02-08-2004, 02:17 AM	#6
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,839	I was looking for some a littel bigger Thanks. __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

02-07-2004, 04:12 PM	#3
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	WLK-86001 from summit racing

02-08-2004, 03:23 AM	#7
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	i can get pics in a week or so after i get my new headers on and these off, i dont know if they are scratched but if youve ever installed headers you will likely scratch them. when i get them off ill check closer to see any damage. I dont want them because the doughnut flange lays on the ground when the truck ia lowered, i dont want to drag it when i have the bags dumped.

02-08-2004, 04:22 PM	#8
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	sale pending Attached Images

02-09-2004, 11:42 AM	#9
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	ok, these are still for sale.

02-10-2004, 04:19 AM	#10
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	got them removed tonight, need these gone, anyone go to chevelle boards? thanks

02-10-2004, 04:59 PM	#11
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	Are there any fitment problems in the truck or are they just NOT what you wanted? Are the first pics(blue frame) and the last pics(silver frame) the same truck. I just want to make sure I wouldn't have any issues installing these in my truck.

02-10-2004, 06:05 PM	#12
krazy_texan Registered User Join Date: Oct 2002 Location: West Des Moines, Ia Posts: 3,233	what size are the flanges on the ends i am interested if you could wait for 2 weeks or a trade of parts let me know i need a new set for my GMC __________________ Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO

02-10-2004, 06:43 PM	#14
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	I guess I overlooked that. Thanks

02-11-2004, 03:56 AM	#15
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	they fit ok, bout like most headers they are tight, i had them in the 6 position so i am not sure how well they will fit farther forward, might need to shave a little off the frame in one spot, nothing major. Im not sure how thick the flanges are, ill go look.

02-11-2004, 04:05 AM	#16
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	the blue frame and the silver are the same one, i had a change of plans in the middle of the build up of this truck, The flanges are 3/8 thick. If you buy these and are not happy with fit i will refund the price you paid. I just ask that you pay shipping to return them. thanks.



Register or Log In To remove these advertisements.

02-12-2004, 02:23 PM	#17
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	pm sent

02-13-2004, 06:22 PM	#18
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	did you get the pm

Register or Log In To remove these advertisements.