RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jessemthompson · 06-26-2015, 02:17 PM

These guys build top notch radiators at a reasonable price. Very happy with my decision to go through them for my LS swap radiator. Thank you.

steveo3318 · 07-11-2015, 04:17 PM

Hey Sparky I need a 4 core with no trans coolers or ac ports as I am running a vintage air AC and standard trans. Also do your radiators work with the stock fan shroud and fan? I am running a 383 about 450 hp with a 3 core factory now and runs cool but I know I will need more cooling when I put my AC on.

SparkyRnD · 07-12-2015, 11:27 AM

We have a scratch & dent version on the shelf with that exact set-up (cosmetic issue only, been pressure tested and is fine). Regular price is $450, forum member price is $425, and for this scratch & dent unit, $375. We've been told by a few customers that they were able to use their factory shroud (I don't believe any mods were done to their shrouds either).

steveo3318 · 07-12-2015, 11:33 AM

Ok sparky after lots of research last night I am thinking one of your 2 cores would cool better than a 4. Is the scratch and sent a 4 core or 2 and if you could shoot a picture of the dent I would be very interested. If it's on the bottom or side I may be ok with it as I still show my truck

SparkyRnD · 07-13-2015, 08:26 AM

all of our radiators are made with dual 1" thick cores (same thickness as a brass & copper 4 core, as the brass & copper style used four 1/2" thick cores, while aluminum uses two 1" thick cores). The marks are on the core side (fins) but with a fin comb could be straightened. I'll get a pic today for you. PM me your email address

SparkyRnD · 07-28-2015, 04:20 PM

bringing up again!

SparkyRnD · 08-12-2015, 05:20 PM

back up!

SparkyRnD · 08-27-2015, 11:39 AM

back up top!

SparkyRnD · 09-13-2015, 02:20 PM

bringing up again

SparkyRnD · 09-29-2015, 05:12 PM

back up top

SparkyRnD · 11-02-2015, 10:22 AM

Up top again

SparkyRnD · 12-03-2015, 09:57 AM

back up top

Az. Hank · 12-09-2015, 12:58 AM

P/M Sent

SparkyRnD · 12-22-2015, 11:10 AM

remember that we will accommodate any engine conversion at no additional cost!

SparkyRnD · 12-28-2015, 05:34 PM

remember to ask for your discount when ordering!

SparkyRnD · 01-08-2016, 03:30 PM

back up again

hozeman469 · 01-12-2016, 04:09 PM

Need one for a ls swap in a 69 pu

SparkyRnD · 01-13-2016, 11:11 AM

Invoice sent, thanks!

SparkyRnD · 01-24-2016, 01:28 PM

back up top!

class01 · 02-22-2016, 12:55 AM

Im doing an LS swap and probably going to run a higher than stock stall in the tranny. Do you recommend a separate transmission cooler or is your built in cooler enough?

SparkyRnD · 02-22-2016, 10:03 AM

Our cooler should be adequate for your needs. The only time we really recommend a separate auxiliary cooler is when you have a high horsepower engine, or live in extreme heat with a medium or higher engine build.

class01 · 02-22-2016, 11:21 PM

thanks sparky. im not at the point in my build to buy anything but i will be going with you on a radiator. hopefully by summertime

SparkyRnD · 06-05-2016, 10:48 AM

back up top

SparkyRnD · 06-17-2016, 09:36 AM

we also carry radiators for many other makes and models, as well as fabricate custom radiators!

SparkyRnD · 07-01-2016, 10:24 AM

back up top!

06-26-2015, 02:17 PM	#126
jessemthompson Registered User Join Date: Nov 2011 Location: Williamsburg, VA Posts: 960	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! These guys build top notch radiators at a reasonable price. Very happy with my decision to go through them for my LS swap radiator. Thank you.

07-11-2015, 04:17 PM	#127
steveo3318 Registered User Join Date: Apr 2014 Location: Sumrall, MS Posts: 381	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Hey Sparky I need a 4 core with no trans coolers or ac ports as I am running a vintage air AC and standard trans. Also do your radiators work with the stock fan shroud and fan? I am running a 383 about 450 hp with a 3 core factory now and runs cool but I know I will need more cooling when I put my AC on. __________________ 1967 c10 3OTT with R10 overdrive. 385 Stroker, 373 posi FITECH EFI, Vintage air, York 210 OBA, 4/6 drop with riddler 20x8 and 20x10 1957 S5T Leslie Supertyfon train horns and EMD bell "No bolt left unturned"

07-12-2015, 11:27 AM	#128
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! We have a scratch & dent version on the shelf with that exact set-up (cosmetic issue only, been pressure tested and is fine). Regular price is $450, forum member price is $425, and for this scratch & dent unit, $375. We've been told by a few customers that they were able to use their factory shroud (I don't believe any mods were done to their shrouds either). __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

07-12-2015, 11:33 AM	#129
steveo3318 Registered User Join Date: Apr 2014 Location: Sumrall, MS Posts: 381	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Ok sparky after lots of research last night I am thinking one of your 2 cores would cool better than a 4. Is the scratch and sent a 4 core or 2 and if you could shoot a picture of the dent I would be very interested. If it's on the bottom or side I may be ok with it as I still show my truck __________________ 1967 c10 3OTT with R10 overdrive. 385 Stroker, 373 posi FITECH EFI, Vintage air, York 210 OBA, 4/6 drop with riddler 20x8 and 20x10 1957 S5T Leslie Supertyfon train horns and EMD bell "No bolt left unturned"

07-13-2015, 08:26 AM	#130
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! all of our radiators are made with dual 1" thick cores (same thickness as a brass & copper 4 core, as the brass & copper style used four 1/2" thick cores, while aluminum uses two 1" thick cores). The marks are on the core side (fins) but with a fin comb could be straightened. I'll get a pic today for you. PM me your email address __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

07-28-2015, 04:20 PM	#131
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! bringing up again! __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

08-12-2015, 05:20 PM	#132
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! back up! __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

08-27-2015, 11:39 AM	#133
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! back up top! __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

09-13-2015, 02:20 PM	#134
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! bringing up again __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

09-29-2015, 05:12 PM	#135
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! back up top __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

11-02-2015, 10:22 AM	#136
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Up top again __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

12-03-2015, 09:57 AM	#137
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! back up top __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

12-09-2015, 12:58 AM	#138
Az. Hank Registered User Join Date: Feb 2009 Location: Fort Mohave, Arizona Posts: 207	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! P/M Sent __________________ My 55 Build 55 C-4

12-22-2015, 11:10 AM	#139
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! remember that we will accommodate any engine conversion at no additional cost! __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

12-28-2015, 05:34 PM	#140
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! remember to ask for your discount when ordering! __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks



Register or Log In To remove these advertisements.

01-08-2016, 03:30 PM	#141
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! back up again __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

01-12-2016, 04:09 PM	#142
hozeman469 Registered User Join Date: Mar 2012 Location: Monroe, Louisiana Posts: 40	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Need one for a ls swap in a 69 pu

01-13-2016, 11:11 AM	#143
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Invoice sent, thanks! __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

01-24-2016, 01:28 PM	#144
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! back up top! __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

02-22-2016, 12:55 AM	#145
class01 Registered User Join Date: Jul 2007 Location: Utah Posts: 295	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Im doing an LS swap and probably going to run a higher than stock stall in the tranny. Do you recommend a separate transmission cooler or is your built in cooler enough?

02-22-2016, 10:03 AM	#146
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! Our cooler should be adequate for your needs. The only time we really recommend a separate auxiliary cooler is when you have a high horsepower engine, or live in extreme heat with a medium or higher engine build. __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

02-22-2016, 11:21 PM	#147
class01 Registered User Join Date: Jul 2007 Location: Utah Posts: 295	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! thanks sparky. im not at the point in my build to buy anything but i will be going with you on a radiator. hopefully by summertime

06-05-2016, 10:48 AM	#148
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! back up top __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

06-17-2016, 09:36 AM	#149
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! we also carry radiators for many other makes and models, as well as fabricate custom radiators! __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

07-01-2016, 10:24 AM	#150
SparkyRnD Registered User Join Date: Dec 2011 Location: acworth georgia Posts: 890	Re: RnD Fabrication 1967-1972 Chevrolet & GMC early C10 / C20 / Blazer Radiators! back up top! __________________ www.RnDFabrication.com Custom Radiators, Valve Covers and Overflow Tanks

Register or Log In To remove these advertisements.