CL: BHM, AL (Nice 1971 Ramp Truck $3k) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Aruba1 · 07-15-2015, 09:57 AM

http://tuscaloosa.craigslist.org/cto/5108116962.html

Actually it's 1 hour west of birmingham. I was going to buy it then I changed my mind, I have too many toys as it is. No affiliation and I haven't seen the truck in person.

"As is 1971 Chevy C-30 Ramp truck. Very tough hauler, needs flywheel have the new starter. The truck has a rebuilt 350 engine, new alternator, new brake booster and master cylinder, Edelbrock carburetor. The ramp bed is 18 1/2 foot long by 7 1/2 foot wide. Also has a Mile Marker winch with about 40 to 50 feet of cable, 4 chain tie down points what ever you haul is guaranteed not to go anywhere. No hydraulics to worry about. Has good tires. Can be pull started so you can drive it away. Price is negotiable within reason. PHONE CALLS ONLY!!!!!! IF YOU TEXT OR E-MAIL ME I WILL NOT RESPOND. My number is in the contact info above."

Maximus · 07-15-2015, 10:07 AM

That thing is awesome!! Someones gonna get a fun project there. I wonder what he uses to pull start it lol...

Aruba1 · 07-15-2015, 10:09 AM

I hope not the beetle :-)

steveo3318 · 07-15-2015, 07:06 PM

about two hours from me! If only we didn't have another little one due in Oct. I would love to have her.

hugger6933 · 07-15-2015, 08:08 PM

I love the add on ac with the knobs that would match the factory type radio. Other than the wrong grille[for the year] it is a really sharp looking hauler for the money. Jim

Aruba1 · 07-15-2015, 09:24 PM

It's been on CL for a few months, if someone that is really far away and is interested in the truck (seriously interested, I have to ad), then PM me and I may find some time to go look at it (no promise, lol). It's 1 hour from my work. Heck, I may even go this weekend and pick her up.

steveo3318 · 07-15-2015, 09:41 PM

I wish I wasn't getting ready for a single income. Man how I could use this. And make her pretty

tcrist · 07-15-2015, 09:46 PM

That is a pretty cool truck. It would be a great one to restore. Just a bit too far away for me though.

cooperhw · 07-16-2015, 10:19 AM

Not a big fan of the ramp trucks. Too "one use only" for me, but would not take much to cut that off, shorten the frame up, put a widened step side bed on, and only paint the rear. $4,000 you would be into a pretty nice little 1 ton dually.

Aruba1 · 07-16-2015, 10:35 AM

Quote:

Originally Posted by cooperhw

Not a big fan of the ramp trucks. Too "one use only" for me, but would not take much to cut that off, shorten the frame up, put a widened step side bed on, and only paint the rear. $4,000 you would be into a pretty nice little 1 ton dually.

Actually I would like to buy it to make it a one long flatbed. Having a ramp truck will mean carrying more wheeled or non-wheeled stuff home and my wife will kill in the middle of my sleep.

steveo3318 · 07-16-2015, 11:07 AM

I build fire pits as a hobby and I am constantly hauling older propane tanks. It would be perfect as is to slide a couple tanks on and ease to the house. Also haul my 65 fastback around on!!!!

trapdoor2 · 07-16-2015, 11:31 AM

Yah, I've been needlin' my elder brother to go snag this one. He's only a couple hours away and always has a 'project' or two that needs hauling.

I would jump on it but I don't have anyplace to stash it. Would be a seriously fun project. I need another project like I need the pox.

Aruba1 · 07-16-2015, 11:48 AM

Today is CL overload, lol: https://bham.craigslist.org/cto/5125772593.html

Aruba1 · 07-19-2015, 07:57 PM

Someone on here bought the truck?

07-15-2015, 09:57 AM	#1
Aruba1 Registered User Join Date: Apr 2014 Location: Birmingham, AL Posts: 560	CL: BHM, AL (Nice 1971 Ramp Truck $3k) http://tuscaloosa.craigslist.org/cto/5108116962.html Actually it's 1 hour west of birmingham. I was going to buy it then I changed my mind, I have too many toys as it is. No affiliation and I haven't seen the truck in person. "As is 1971 Chevy C-30 Ramp truck. Very tough hauler, needs flywheel have the new starter. The truck has a rebuilt 350 engine, new alternator, new brake booster and master cylinder, Edelbrock carburetor. The ramp bed is 18 1/2 foot long by 7 1/2 foot wide. Also has a Mile Marker winch with about 40 to 50 feet of cable, 4 chain tie down points what ever you haul is guaranteed not to go anywhere. No hydraulics to worry about. Has good tires. Can be pull started so you can drive it away. Price is negotiable within reason. PHONE CALLS ONLY!!!!!! IF YOU TEXT OR E-MAIL ME I WILL NOT RESPOND. My number is in the contact info above."

07-15-2015, 10:07 AM	#2
Maximus Registered User Join Date: Feb 2011 Location: Santa Rosa, CA Posts: 672	Re: CL: BHM, AL (Nice 1971 Ramp Truck $3k) That thing is awesome!! Someones gonna get a fun project there. I wonder what he uses to pull start it lol... __________________ 1955 2nd Series 3100 - 400 Pontiac / BW Super T-10 4-Speed 1972 K5 Blazer 350 Auto 4x4 1928 Ford Model A Tudor

07-15-2015, 10:09 AM	#3
Aruba1 Registered User Join Date: Apr 2014 Location: Birmingham, AL Posts: 560	Re: CL: BHM, AL (Nice 1971 Ramp Truck $3k) I hope not the beetle :-)

07-15-2015, 07:06 PM	#4
steveo3318 Registered User Join Date: Apr 2014 Location: Sumrall, MS Posts: 381	Re: CL: BHM, AL (Nice 1971 Ramp Truck $3k) about two hours from me! If only we didn't have another little one due in Oct. I would love to have her. __________________ 1967 c10 3OTT with R10 overdrive. 385 Stroker, 373 posi FITECH EFI, Vintage air, York 210 OBA, 4/6 drop with riddler 20x8 and 20x10 1957 S5T Leslie Supertyfon train horns and EMD bell "No bolt left unturned"

07-15-2015, 08:08 PM	#5
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,277	Re: CL: BHM, AL (Nice 1971 Ramp Truck $3k) I love the add on ac with the knobs that would match the factory type radio. Other than the wrong grille[for the year] it is a really sharp looking hauler for the money. Jim

07-15-2015, 09:24 PM	#6
Aruba1 Registered User Join Date: Apr 2014 Location: Birmingham, AL Posts: 560	Re: CL: BHM, AL (Nice 1971 Ramp Truck $3k) It's been on CL for a few months, if someone that is really far away and is interested in the truck (seriously interested, I have to ad), then PM me and I may find some time to go look at it (no promise, lol). It's 1 hour from my work. Heck, I may even go this weekend and pick her up.

07-15-2015, 09:41 PM	#7
steveo3318 Registered User Join Date: Apr 2014 Location: Sumrall, MS Posts: 381	Re: CL: BHM, AL (Nice 1971 Ramp Truck $3k) I wish I wasn't getting ready for a single income. Man how I could use this. And make her pretty __________________ 1967 c10 3OTT with R10 overdrive. 385 Stroker, 373 posi FITECH EFI, Vintage air, York 210 OBA, 4/6 drop with riddler 20x8 and 20x10 1957 S5T Leslie Supertyfon train horns and EMD bell "No bolt left unturned"

07-15-2015, 09:46 PM	#8
tcrist Registered User Join Date: May 2014 Location: Manteca, Ca. Posts: 274	Re: CL: BHM, AL (Nice 1971 Ramp Truck $3k) That is a pretty cool truck. It would be a great one to restore. Just a bit too far away for me though. __________________ Terry Soon to be retired and moving to Bristol, TN.

07-16-2015, 10:19 AM	#9
cooperhw Registered User Join Date: Oct 2014 Location: Mesa AZ (Near Phoenix) Posts: 2,302	Re: CL: BHM, AL (Nice 1971 Ramp Truck $3k) Not a big fan of the ramp trucks. Too "one use only" for me, but would not take much to cut that off, shorten the frame up, put a widened step side bed on, and only paint the rear. $4,000 you would be into a pretty nice little 1 ton dually. __________________ "Life is too short to drive a boring vehicle". Later, Wayne

07-16-2015, 11:07 AM	#11
steveo3318 Registered User Join Date: Apr 2014 Location: Sumrall, MS Posts: 381	Re: CL: BHM, AL (Nice 1971 Ramp Truck $3k) I build fire pits as a hobby and I am constantly hauling older propane tanks. It would be perfect as is to slide a couple tanks on and ease to the house. Also haul my 65 fastback around on!!!! __________________ 1967 c10 3OTT with R10 overdrive. 385 Stroker, 373 posi FITECH EFI, Vintage air, York 210 OBA, 4/6 drop with riddler 20x8 and 20x10 1957 S5T Leslie Supertyfon train horns and EMD bell "No bolt left unturned"

07-16-2015, 11:31 AM	#12
trapdoor2 Registered User Join Date: May 2015 Location: Huntsville, AL Posts: 37	Re: CL: BHM, AL (Nice 1971 Ramp Truck $3k) Yah, I've been needlin' my elder brother to go snag this one. He's only a couple hours away and always has a 'project' or two that needs hauling. I would jump on it but I don't have anyplace to stash it. Would be a seriously fun project. I need another project like I need the pox. __________________ ===Marc '55 Buick Roadmaster Riviera 76R '69 Chevy C-10 CST/10 396 LWB, auto, air, PS (PB soon!)

07-16-2015, 11:48 AM	#13
Aruba1 Registered User Join Date: Apr 2014 Location: Birmingham, AL Posts: 560	Re: CL: BHM, AL (Nice 1971 Ramp Truck $3k) Today is CL overload, lol: https://bham.craigslist.org/cto/5125772593.html

07-19-2015, 07:57 PM	#14
Aruba1 Registered User Join Date: Apr 2014 Location: Birmingham, AL Posts: 560	Re: CL: BHM, AL (Nice 1971 Ramp Truck $3k) Someone on here bought the truck?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.