OK WTB: Low hump for patch repair. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chris92 · 07-22-2015, 04:38 PM

I am looking for at least the center section of a low hump. PO cut out a square to install a 4 speed shifter and I want to go back to a column shift.

Thanks in advance!

**Todd68Chevy** · 07-22-2015, 05:17 PM

I have one but shipping could get pricey from Indiana depending on how big of a piece you want. What I have now is large enough to cover a high hump hole but I can cut it down to what ever you need/ want. $25 plus shipping. I can get a picture of what I have later tonight. It is out of a 71 or 72 but I think they should be the same in that area. I should have other years available also if there is a difference.

I responded to your other ad in the WTB section yesterday.

budnikguy · 07-22-2015, 05:25 PM

Get me measurements and a pic or two, and I can help you out...

teeitup · 07-22-2015, 08:40 PM

I've got one out there cut out already, Thanks Randy

**Todd68Chevy** · 07-22-2015, 09:35 PM

Quote:

Originally Posted by Todd68Chevy

I have one but shipping could get pricey from Indiana depending on how big of a piece you want. What I have now is large enough to cover a high hump hole but I can cut it down to what ever you need/ want. $25 plus shipping. I can get a picture of what I have later tonight. It is out of a 71 or 72 but I think they should be the same in that area. I should have other years available also if there is a difference.

I responded to your other ad in the WTB section yesterday.

Here is what I have

Chris92 · 07-22-2015, 09:46 PM

Wow, lots of responses.

I just need the part highlighted below in red. It can actually be a little smaller.

Todd68Chevy can you cut it down and ship it?

How about $40.00 shipped? You were first on the responses, not sure why I never got that message.

Thanks a ton!!!

Chris

**Todd68Chevy** · 07-22-2015, 10:06 PM

Quote:

Originally Posted by Chris92

Wow, lots of responses.

I just need the part highlighted below in red. It can actually be a little smaller.

Todd68Chevy can you cut it down and ship it?

How about $40.00 shipped? You were first on the responses, not sure why I never got that message.

Thanks a ton!!!

Chris

Chris, I will need to see what the shipping would be but I can do that as long as the shipping is not stupid. It will be after work tomorrow before I can find anything out if that works for you. Thanks

Chris92 · 07-22-2015, 10:14 PM

That works for me. If the shipping is higher I will cover it. $25 plus shipping works perfectly. Just let me know how much and I will PayPal it if that works for you.

Thanks again for helping me out!

Thanks everyone else for posting as well.

Chris

Woodnears · 07-22-2015, 10:28 PM

I've got one that was from my repop floor that I put a high hump in. You pay shipping and it's yours. It's just about the right size.

**Todd68Chevy** · 07-23-2015, 09:25 PM

Here is what I cut it down to. I left all the edges so it would keep its strength. If you are still interested in mine then I need a Zip code to figure the shipping but I am sure we can work it out.

Chris92 · 07-23-2015, 09:46 PM

Yes, I want it. Thanks!!!

74464

Chris

**Todd68Chevy** · 07-24-2015, 07:44 AM

Quote:

Originally Posted by Chris92

Yes, I want it. Thanks!!!

74464

Chris

Shipping is showing $13.60 for a total of $38.60. PM sent.

Chris92 · 07-24-2015, 01:07 PM

$40.00 sent via Paypal.

Thanks again to everyone that jumped in on this thread!

Todd, thanks a ton!

Chris

**Todd68Chevy** · 07-24-2015, 01:27 PM

Payment received. It will be in the mail tomorrow. Thanks

**jakewalter** · 07-24-2015, 08:59 PM

Quote:

Originally Posted by Woodnears

I've got one that was from my repop floor that I put a high hump in. You pay shipping and it's yours. It's just about the right size.

Would you still be willing to sell this?
If so I could use.
I would need it shipped to 49685

Thanks so much,
Jake

07-22-2015, 04:38 PM	#1
Chris92 Registered User Join Date: Dec 2010 Location: oklahoma Posts: 113	WTB: Low hump for patch repair. I am looking for at least the center section of a low hump. PO cut out a square to install a 4 speed shifter and I want to go back to a column shift. Thanks in advance! __________________ Chris Build Thread for CSautosports 69 SWB: http://67-72chevytrucks.com/vboard/s...d.php?t=675701

07-22-2015, 05:17 PM	#2
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: WTB: Low hump for patch repair. I have one but shipping could get pricey from Indiana depending on how big of a piece you want. What I have now is large enough to cover a high hump hole but I can cut it down to what ever you need/ want. $25 plus shipping. I can get a picture of what I have later tonight. It is out of a 71 or 72 but I think they should be the same in that area. I should have other years available also if there is a difference. I responded to your other ad in the WTB section yesterday. __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

07-22-2015, 05:25 PM	#3
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: WTB: Low hump for patch repair. Get me measurements and a pic or two, and I can help you out...

07-22-2015, 08:40 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: WTB: Low hump for patch repair. I've got one out there cut out already, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-22-2015, 09:46 PM	#6
Chris92 Registered User Join Date: Dec 2010 Location: oklahoma Posts: 113	Re: WTB: Low hump for patch repair. Wow, lots of responses. I just need the part highlighted below in red. It can actually be a little smaller. Todd68Chevy can you cut it down and ship it? How about $40.00 shipped? You were first on the responses, not sure why I never got that message. Thanks a ton!!! Chris Attached Images __________________ Chris Build Thread for CSautosports 69 SWB: http://67-72chevytrucks.com/vboard/s...d.php?t=675701

07-22-2015, 10:14 PM	#8
Chris92 Registered User Join Date: Dec 2010 Location: oklahoma Posts: 113	Re: WTB: Low hump for patch repair. That works for me. If the shipping is higher I will cover it. $25 plus shipping works perfectly. Just let me know how much and I will PayPal it if that works for you. Thanks again for helping me out! Thanks everyone else for posting as well. Chris __________________ Chris Build Thread for CSautosports 69 SWB: http://67-72chevytrucks.com/vboard/s...d.php?t=675701

07-22-2015, 10:28 PM	#9
Woodnears Registered User Join Date: Feb 2010 Location: Dodge city Ks Posts: 620	Re: WTB: Low hump for patch repair. I've got one that was from my repop floor that I put a high hump in. You pay shipping and it's yours. It's just about the right size. Attached Images

07-23-2015, 09:25 PM	#10
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: WTB: Low hump for patch repair. Here is what I cut it down to. I left all the edges so it would keep its strength. If you are still interested in mine then I need a Zip code to figure the shipping but I am sure we can work it out. Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

07-23-2015, 09:46 PM	#11
Chris92 Registered User Join Date: Dec 2010 Location: oklahoma Posts: 113	Re: WTB: Low hump for patch repair. Yes, I want it. Thanks!!! 74464 Chris __________________ Chris Build Thread for CSautosports 69 SWB: http://67-72chevytrucks.com/vboard/s...d.php?t=675701

07-24-2015, 01:07 PM	#13
Chris92 Registered User Join Date: Dec 2010 Location: oklahoma Posts: 113	Re: WTB: Low hump for patch repair. $40.00 sent via Paypal. Thanks again to everyone that jumped in on this thread! Todd, thanks a ton! Chris __________________ Chris Build Thread for CSautosports 69 SWB: http://67-72chevytrucks.com/vboard/s...d.php?t=675701

07-24-2015, 01:27 PM	#14
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: WTB: Low hump for patch repair. Payment received. It will be in the mail tomorrow. Thanks __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.