Can't lock door unless I push in

[cdowns]

Originally Posted by clemsonteg

i can give that a try too. Should it be done with the door closed, or heat it and then close the door?

heat up and then close the door on it/// be carefull not to use too much heat

[Andy4639]

Another thing to think about. Take a small pick and peek some holes in the trim to let the air escape when the door is shut.
You will never know they are there and they shouldn't bother the rubber at all if done right.

[clemsonteg]

Originally Posted by Andy4639

Another thing to think about. Take a small pick and peek some holes in the trim to let the air escape when the door is shut.
You will never know they are there and they shouldn't bother the rubber at all if done right.

Thanks again Andy. I actually did that a few weeks ago thinking maybe it was trapped air not allowing the seal to collapse.

[clemsonteg]

Originally Posted by cdowns

heat up and then close the door on it/// be carefull not to use too much heat

Thanks. I'll try this a section at a time. Heat, close door, let cool, repeat. I will see if that helps.