for anyone who orders or was thinking about ordering from the truck shop

[WOLFMANmike]

let me be clear here 1st i have found out lately that im not very good with words lately so that being said i want to say that this post is in no way a bashing post its merely just meant to be helpful to you all .... ok so i ordered a full window cat gut kit ( aka Window felt kit ) from the truck shop.. its a nice kit goes on well and is not a glue in .. but lol here is the helpful part check your Window divider rubber seal if it is still soft and good and tight then leave it lol.. because i ripped mine out because it was Hard as a rock but the kit from them on that part is not a thick rubber seal anymore now its just the fuzzy part of a Velcro tape as in the part that Velcro hooks will stick to .. yup thats right just that.. so now as you can imagine the window dose move a bit in that part of the channel .. confused about this before putting it in . i called them and asked for the tech Dept .. got put on hold for a lil over 10 mins lol only to be told by the same lady who put me on hold .. we don't have a tech dept ...lol so i asked her about this and she says its designed be a replacement kit for the factory so they are right use them .. ok so again for the price the kit is very good and snaps into place .. but if you can save your divider rubber .. do so you will be much more happy ..... Happy Truckin

[Evoracer]

From my experience, they're very good in knowing what is in their catalog. That's about it. YMMV

[Chevy Fleetside]

Yeah. They don't reproduce that part anymore so they give you the stick on felt. I am not 100% sure but I think Soft Seal dose make it.

[PGSigns]

The one I got from LMC was like that but the set I got from Brothers was like the factory felt.
Jimmy

[luvbowties]

Originally Posted by Chevy Fleetside

Yeah. They don't reproduce that part anymore so they give you the stick on felt. I am not 100% sure but I think Soft Seal dose make it.

Experienced same problem here--several years ago, so do not remember clearly. But, is there room for 2 layers to take up the extra room and still leave room for glass-sliding?
Sam

[Lugnutz65]

Originally Posted by WOLFMANmike

let me be clear here 1st i have found out lately that im not very good with words lately so that being said i want to say that this post is in no way a bashing post its merely just meant to be helpful to you all .... ok so i ordered a full window cat gut kit ( aka Window felt kit ) from the truck shop.. its a nice kit goes on well and is not a glue in .. but lol here is the helpful part check your Window divider rubber seal if it is still soft and good and tight then leave it lol.. because i ripped mine out because it was Hard as a rock but the kit from them on that part is not a thick rubber seal anymore now its just the fuzzy part of a Velcro tape as in the part that Velcro hooks will stick to .. yup thats right just that.. so now as you can imagine the window dose move a bit in that part of the channel .. confused about this before putting it in . i called them and asked for the tech Dept .. got put on hold for a lil over 10 mins lol only to be told by the same lady who put me on hold .. we don't have a tech dept ...lol so i asked her about this and she says its designed be a replacement kit for the factory so they are right use them .. ok so again for the price the kit is very good and snaps into place .. but if you can save your divider rubber .. do so you will be much more happy ..... Happy Truckin

I have had nothing but good experiences with all of my orders from the Truck and Car Shop. I've placed orders with the Calif and the newer NC store. They sell the original style window channel run. It is part number 60-075105 on page number 67 of their January 2015 catalog. I agree that the sales lady should have known more about their catalog products. My OE Division bar inserts were $22 and worth every penny. Fit and work great.

[blown240]

Aren't there 2 options. For glass with the chrome edge, and for glass without?

Perhaps you got the wrong one?

[WOLFMANmike]

Originally Posted by Lugnutz65

I have had nothing but good experiences with all of my orders from the Truck and Car Shop. I've placed orders with the Calif and the newer NC store. They sell the original style window channel run. It is part number 60-075105 on page number 67 of their January 2015 catalog. I agree that the sales lady should have known more about their catalog products. My OE Division bar inserts were $22 and worth every penny. Fit and work great.

Here is what was given to me in mine

[Lugnutz65]

Originally Posted by WOLFMANmike

Here is what was given to me in mine

Yes. You need to understand that the OE style doesn't come in a kit. You need to order the OE style if you want the nice kind. Unfortunately, the OE style are not available as a kit.

[WOLFMANmike]

Originally Posted by Lugnutz65

Yes. You need to understand that the OE style doesn't come in a kit. You need to order the OE style if you want the nice kind. Unfortunately, the OE style are not available as a kit.

ok wait a second lets be a little fair here i ordered a kit from them and online in the online catalog on page 67 part # 64-07503 ... which states this in the ad includes upper door glass channels .. Anti Rattle window seals and division bar inserts kits does 2 doors .... so now that being said how is it i am to understand that i would have to buy anything different ? and i also did say i wasent bashing them it was to try to help others not make the same mistake . but really if you read that part number how do you think one is to know they need anything else ?

[mason767]

how do you post a thread?

[WOLFMANmike]

Originally Posted by mason767

how do you post a thread?

at the top of the page when you first enter just at the top of the list you will me post new thread

[LT1 Burb]

Shoot, I just ordered that set, I need to check it now.
Posted via Mobile Device

[WOLFMANmike]

Originally Posted by LT1 Burb

Shoot, I just ordered that set, I need to check it now.
Posted via Mobile Device

IF YOU LOOK IN THE PICTURE damn caps lock lol any way look at it and it does not show a flat fuzzy tape it shows the real divider so yeah its very confusing to say the least

[Lugnutz65]

Originally Posted by WOLFMANmike

ok wait a second lets be a little fair here i ordered a kit from them and online in the online catalog on page 67 part # 64-07503 ... which states this in the ad includes upper door glass channels .. Anti Rattle window seals and division bar inserts kits does 2 doors .... so now that being said how is it i am to understand that i would have to buy anything different ? and i also did say i wasent bashing them it was to try to help others not make the same mistake . but really if you read that part number how do you think one is to know they need anything else ?

I'm not saying that you should have known better or anything like that. The Truck and Car Shop catalog should say something to help customers know what they are ordering and that the kit has the CHEAP universal style division bar inserts. I guess I knew to order the OE style inserts because I either read somewhere else that the kit had the thin cheap ones. I also figured that if they sell the OE style as a separate item, then the COUNTERPART kits must not have the correct inserts.

So, I am just trying to help you find the part you want. Not trying to make any issues about who did what. I'm not certain what other vendors sell, but I'd say that if you order any division bar insert made by COUNTERPART, (by itself or in a kit) you can pretty much be sure that it's gonna be the thin cheap insert.

[nsb29]

I got it from brothers and got the correct division bar insert I think the kit mite have ben less money LOL

[LT1 Burb]

Mine are the same, thanks for the heads up as they are going back.

[jimmyjammoto]

I got mine a couple of months ago from LMC. FWIW they were the OE kind..I've always been leery about truck and car shop for some reason..

[WOLFMANmike]

the product very good and goes on easy without glueing but its just the dividers just get the oem dividers is all

[WOLFMANmike]

Originally Posted by Lugnutz65

I'm not saying that you should have known better or anything like that. The Truck and Car Shop catalog should say something to help customers know what they are ordering and that the kit has the CHEAP universal style division bar inserts. I guess I knew to order the OE style inserts because I either read somewhere else that the kit had the thin cheap ones. I also figured that if they sell the OE style as a separate item, then the COUNTERPART kits must not have the correct inserts.

So, I am just trying to help you find the part you want. Not trying to make any issues about who did what. I'm not certain what other vendors sell, but I'd say that if you order any division bar insert made by COUNTERPART, (by itself or in a kit) you can pretty much be sure that it's gonna be the thin cheap insert.

Lugnutz sorry for the miss communication on my part i just thought you was saying i should have known lol ty for your help

[61K10]

as blown240 said 2 types, one for the windows with the metal around the edge and one for no metal. I got the stick on as it's the only type for the metal edge that i could find. the other looks like it snaps in some way? aren't 64-66 tks all without the metal?

[LT1 Burb]

Originally Posted by 61K10

as blown240 said 2 types, one for the windows with the metal around the edge and one for no metal. I got the stick on as it's the only type for the metal edge that i could find. the other looks like it snaps in some way? aren't 64-66 tks all without the metal?

Yeah no metal around the window edge

[joedoh]

I got the kit from bowtiebits because they are here in town and it had the correct seal and was easy to install. 65 bucks too! Jeff @ btb only picks high quality stuff for his stock.

http://www.bowtiebits.com/store/stor...Category_ID=76

[Boedean1981]

That's where I am getting some of my parts to as they are in town too joedoh!