350 v8/3 speed Muncie clutch parts question

[jomatt20]

Hi guys, like said above I have a 72 gmc with 350/3 speed. My question is on the z-bar for the clutch, I have replaced the frame pivot ball bushings and put new felt washer but on the pivot ball that mounts to the engine block, for that side ther was no bushings or anything. The only thing I did put wa a new felt washer. I'm concerned that I didn't assemble it correctly and wanted yalls input. Thanks guys

[midniteblues]

Originally Posted by jomatt20

Hi guys, like said above I have a 72 gmc with 350/3 speed. My question is on the z-bar for the clutch, I have replaced the frame pivot ball bushings and put new felt washer but on the pivot ball that mounts to the engine block, for that side ther was no bushings or anything. The only thing I did put wa a new felt washer. I'm concerned that I didn't assemble it correctly and wanted yalls input. Thanks guys

sounds like you did it right.
as long as you got the 2 bushings and the round clip in the z bar on the frame side you shouldnt have any problems.
make sure you get both them ball studs tight. I've seen them work loose and cause problems.