|
02-16-2004, 01:47 PM
|
#1 |
|
Registered User
Join Date: Feb 2000
Location: Zillah Wa. USA
Posts: 394
|
Caster
I'm finishing up my latest project a 4.3 powered 67 Scout 800. The specs are: 700R4/Atlas, SOA, High Steer, D-44's, 315-75-16's (35") MTR's and much more.
I'm twisting the axle to get more caster, my target is 7 1/2 degrees. How much caster are you guys using on your 1970 to mid 80's rigs?
__________________
'69 SWB '76 International "Terra" "Hooked on holiday beer" |
|
|
|
02-16-2004, 10:19 PM
|
#2 |
|
user # 2756
 
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
My 70 factory manual has 8.5 degrees for the 1/2 and 3/4 tons.
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm 
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
