NC GM Open Carrier and 3.07 Gearset - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NC_John · 08-10-2015, 05:10 PM

1970 Truck 12 bolt open carrier (non-posi) and 3.07 gearset. EXCELLENT condition. $75 + shipping (heavy!)

Removed it to install a posi carrier.

**70STOVEBOLT** · 08-10-2015, 10:02 PM

Shipping quote to 46562 please.

Thanks,
Mark

*mjgord51* · 08-10-2015, 10:48 PM

Quote:

Originally Posted by NC_John

1970 Truck 12 bolt open carrier (non-posi) and 3.07 gearset. EXCELLENT condition. $75 + shipping (heavy!)

Removed it to install a posi carrier.

Second in line to 92284 if it works in my 68 C10 6 cyl, 12 bolt/ coils at rear, If shipping doesn't take a weeks wages. mjgord51

NC_John · 08-11-2015, 07:56 AM

Quote:

Originally Posted by 70STOVEBOLT

Shipping quote to 46562 please.

Thanks,
Mark

Quote:

Originally Posted by mjgord51

Second in line to 92284 if it works in my 68 C10 6 cyl, 12 bolt/ coils at rear, If shipping doesn't take a weeks wages. mjgord51

Will do guys- sorry I missed this last night. I was out in the shop wrenching on the john deere....

Indiana shouldn't be too bad, I might even be able to truck it up a good ways north myself before I ship it to save you some money. CA....we'll see.

I'll check on both tonight when I get home.

thanks!

**70STOVEBOLT** · 08-11-2015, 09:56 AM

Thanks John, just let me know.

Thanks,
Mark

*mjgord51* · 08-11-2015, 04:57 PM

Quote:

Originally Posted by NC_John

Will do guys- sorry I missed this last night. I was out in the shop wrenching on the john deere....

Indiana shouldn't be too bad, I might even be able to truck it up a good ways north myself before I ship it to save you some money. CA....we'll see.

I'll check on both tonight when I get home.

thanks!

Thanks, I'll be on the side line. mjgord51

NC_John · 08-11-2015, 07:08 PM

Quote:

Originally Posted by 70STOVEBOLT

Shipping quote to 46562 please.

Thanks,
Mark

Mark.

45 lb box, 18 x 16 x 12"

USPS says $22 for media mail (which I don't know will work)
FedEx says $33.50

Weight of 45 lbs is estimated (box won't fit on scale so I can read it)

Those should be close- I'll adjust if actual is different.

NC_John · 08-11-2015, 07:16 PM

Quote:

Originally Posted by mjgord51

Thanks, I'll be on the side line. mjgord51

Mjord51:

Same thing- 45 lb box, 16 x 18 x 12"

USPS says $25. (Which I am skeptical of)
And FedEx $67.

*mjgord51* · 08-11-2015, 10:31 PM

Quote:

Originally Posted by NC_John

Mark.

45 lb box, 18 x 16 x 12"

USPS says $22 for media mail (which I don't know will work)
FedEx says $33.50

Weight of 45 lbs is estimated (box won't fit on scale so I can read it)

Those should be close- I'll adjust if actual is different.

Quote:

Originally Posted by NC_John

Mjord51:

Same thing- 45 lb box, 16 x 18 x 12"

USPS says $25. (Which I am skeptical of)
And FedEx $67.

John I see two different prices, is it because of the distance to ship, USPS at $25 ship it to me, I'll take it, mjgord51

*mjgord51* · 08-11-2015, 10:47 PM

Quote:

Originally Posted by mjgord51

John I see two different prices, is it because of the distance to ship, USPS at $25 ship it to me, I'll take it, mjgord51

John I am sorry for jumping the gun, or should I be saying Mark I sorry for jumping the gun, I am 2nd in line if Mark doesn't take it, mjgord51

**70STOVEBOLT** · 08-12-2015, 08:08 AM

I will pass it to mjgord51, I am not ready to do the gear swap right now. Thanks for getting the shipping quote.

Thanks,
Mark

NC_John · 08-12-2015, 09:12 AM

Both guys stepped out- still available....

joel.e · 08-13-2015, 12:22 PM

John - do you have any jobs around Richmond, VA coming up? I may be interested need to check on some things first.

NC_John · 08-13-2015, 07:02 PM

Quote:

Originally Posted by joel.e

John - do you have any jobs around Richmond, VA coming up? I may be interested need to check on some things first.

No plans to head up that way right now Joel but shipping between here and there should be pretty reasonable.
Posted via Mobile Device

NC_John · 08-17-2015, 06:56 PM

Monday night bump......
Posted via Mobile Device

JimH2828 · 08-17-2015, 07:12 PM

Does it come with the below parts?
- 2 spider gears and center pin with locking bolt
- bearing races for those pressed on bearings

Thanks
Jim

NC_John · 08-21-2015, 08:06 AM

Quote:

Originally Posted by JimH2828

Does it come with the below parts?
- 2 spider gears and center pin with locking bolt
- bearing races for those pressed on bearings

Thanks
Jim

Jim- very sorry for the delay- I've been out of the office, big-trucking.

The spider gears are part of the carrier and are still there. I'll have to check on the center pin - I don't remember putting it back in but my expert helper might have. I can check when I get back home this weekend and will let you know.

I don't have the races- at this point of dissasembly I would recommend putting in a new set if bearings.

Thanks

JimH2828 · 08-21-2015, 08:11 AM

OK, sounds good. I'll wait for your response.

-Jim

NC_John · 08-23-2015, 01:35 PM

Quote:

Originally Posted by JimH2828

OK, sounds good. I'll wait for your response.

-Jim

Hey Jim, I'm back home and checked inside the box. No center pin or lock screw/bolt. IIRC, we needed it for the new eaton we installed.

Despite these few pieces not included, its in fantastic shape. Make me an offer!

John

JimH2828 · 08-23-2015, 02:37 PM

PM sent.

NC_John · 08-25-2015, 01:39 PM

SOLD to Jim H.

JimH2828 · 08-27-2015, 09:48 PM

Parts received and look great.

Thanks
Jim

NC_John · 08-28-2015, 10:29 AM

Quote:

Originally Posted by JimH2828

Parts received and look great.

Thanks
Jim

Thanks Jim. Let me know if you head this way for Goodguys or Autofair.

08-10-2015, 05:10 PM	#1
NC_John Registered User Join Date: Jul 2013 Location: Rockwell, NC Posts: 1,639	GM Open Carrier and 3.07 Gearset 1970 Truck 12 bolt open carrier (non-posi) and 3.07 gearset. EXCELLENT condition. $75 + shipping (heavy!) Removed it to install a posi carrier. __________________ 1970 C-10 LWB "Blu" Instagram (current build pictures) 70_nc_c10

08-10-2015, 10:02 PM	#2
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,254	Re: GM Open Carrier and 3.07 Gearset Shipping quote to 46562 please. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

08-11-2015, 09:56 AM	#5
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,254	Re: GM Open Carrier and 3.07 Gearset Thanks John, just let me know. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

08-12-2015, 08:08 AM	#11
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,254	Re: GM Open Carrier and 3.07 Gearset I will pass it to mjgord51, I am not ready to do the gear swap right now. Thanks for getting the shipping quote. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

08-12-2015, 09:12 AM	#12
NC_John Registered User Join Date: Jul 2013 Location: Rockwell, NC Posts: 1,639	Re: GM Open Carrier and 3.07 Gearset Both guys stepped out- still available.... __________________ 1970 C-10 LWB "Blu" Instagram (current build pictures) 70_nc_c10

08-13-2015, 12:22 PM	#13
joel.e Registered User Join Date: Jul 2012 Location: Moseley, VA Posts: 164	Re: GM Open Carrier and 3.07 Gearset John - do you have any jobs around Richmond, VA coming up? I may be interested need to check on some things first. __________________ 1967 C10 SWB Fleetside Duramax/Allison 1966 Chevelle Malibu, EFI BBC, pro touring starter kit

08-17-2015, 06:56 PM	#15
NC_John Registered User Join Date: Jul 2013 Location: Rockwell, NC Posts: 1,639	Monday night bump...... Posted via Mobile Device

08-17-2015, 07:12 PM	#16
JimH2828 Registered User Join Date: Oct 2012 Location: Cumming GA Posts: 613	Re: GM Open Carrier and 3.07 Gearset Does it come with the below parts? - 2 spider gears and center pin with locking bolt - bearing races for those pressed on bearings Thanks Jim

08-21-2015, 08:11 AM	#18
JimH2828 Registered User Join Date: Oct 2012 Location: Cumming GA Posts: 613	Re: GM Open Carrier and 3.07 Gearset OK, sounds good. I'll wait for your response. -Jim

08-23-2015, 02:37 PM	#20
JimH2828 Registered User Join Date: Oct 2012 Location: Cumming GA Posts: 613	Re: GM Open Carrier and 3.07 Gearset PM sent.

08-25-2015, 01:39 PM	#21
NC_John Registered User Join Date: Jul 2013 Location: Rockwell, NC Posts: 1,639	Re: GM Open Carrier and 3.07 Gearset SOLD to Jim H. __________________ 1970 C-10 LWB "Blu" Instagram (current build pictures) 70_nc_c10

08-27-2015, 09:48 PM	#22
JimH2828 Registered User Join Date: Oct 2012 Location: Cumming GA Posts: 613	Re: GM Open Carrier and 3.07 Gearset Parts received and look great. Thanks Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.