The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-31-2015, 11:30 AM   #14
Junior127
Registered User
 
Join Date: Aug 2015
Location: Brockport, NY
Posts: 10
Re: 350 GM crate motor oil pan , can't find a replacement

Thanks for all the responses. The Jegs lead with the part number was very helpful.

It turns out that Jegs has the pan with the dual bump out but they also make pans that only have the bump out on the drivers side or the passengers side. For a third of the cost.

The problem I was having at the local parts store appears to be based on the dual bump out.

After learning that Jegs had pans with a single bump out that works I was able to find a pan at the local parts store with a single bump out on the passenger side that I needed. I was able to compare it directly with the pan I removed.

Thanks again for all the responses.
Junior127 is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:58 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com