What a neat truck! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

In The Ten Ring · 09-09-2015, 03:07 PM

I am not the owner.

http://newhaven.craigslist.org/cto/5178340367.html

**special-K** · 09-09-2015, 07:54 PM

That C/20 looks an awful lot like a K/20 to me. It really is neat. I'd like it for plowing but not at $6k. Those dump hoists for pickup beds are neat, but watch putting much weight in there. That bed is designed t carry weight while mounted to frame rails. there were units that had a sub-frame, but you can tell those by the bed sitting much higher

In The Ten Ring · 09-09-2015, 09:20 PM

Are you sure it's even a K20? Count the wheel lug nuts. I may be off there, correct me if I am!

I'm thinking it's a 1 ton with 9 foot bed. I'd love to have it, either way, but I cannot justify another truck until mine is running.

Maybe next summer. M A Y B E.

**special-K** · 09-09-2015, 10:07 PM

It's a 4wd and that's an HO52... or HO72. It does look like a longer bed, but it's a 8'. The C/30 beds have enough space in front of the fender for a spare

57taskforce · 09-09-2015, 10:07 PM

Looks like a k/20 to me. Blue dial spicers at least suggest that it's got a 3/4 ton front axle as well as an eaton rear. Looks like an 8' step side to me but the pictures aren't the best either.

mike16 · 09-10-2015, 02:54 AM

alot of literature printed in the past has stated that the 4 wheel drive was an option on c20's. Unless I'm mistaken.... K20 were a separate model. This seller may be relying on inaccurate information for it.

wreckedchevy · 09-10-2015, 09:57 AM

that is a nice find!

57taskforce · 09-10-2015, 10:39 AM

Quote:

Originally Posted by mike16

alot of literature printed in the past has stated that the 4 wheel drive was an option on c20's. Unless I'm mistaken.... K20 were a separate model. This seller may be relying on inaccurate information for it.

C/20= 3/4 ton 2x4
K/20= 3/4 ton 4x4

mike16 · 09-10-2015, 10:47 AM

Quote:

Originally Posted by 57taskforce

C/20= 3/4 ton 2x4
K/20= 3/4 ton 4x4

I get it, but I got a book or two published in the mid to late 80's/early 90's that state the k's were an "option" on the c series rathe than a separate model.

09-09-2015, 03:07 PM	#1
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,427	What a neat truck! I am not the owner. http://newhaven.craigslist.org/cto/5178340367.html

09-09-2015, 07:54 PM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: What a neat truck! That C/20 looks an awful lot like a K/20 to me. It really is neat. I'd like it for plowing but not at $6k. Those dump hoists for pickup beds are neat, but watch putting much weight in there. That bed is designed t carry weight while mounted to frame rails. there were units that had a sub-frame, but you can tell those by the bed sitting much higher __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-09-2015, 09:20 PM	#3
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,427	Re: What a neat truck! Are you sure it's even a K20? Count the wheel lug nuts. I may be off there, correct me if I am! I'm thinking it's a 1 ton with 9 foot bed. I'd love to have it, either way, but I cannot justify another truck until mine is running. Maybe next summer. M A Y B E.

09-09-2015, 10:07 PM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: What a neat truck! It's a 4wd and that's an HO52... or HO72. It does look like a longer bed, but it's a 8'. The C/30 beds have enough space in front of the fender for a spare __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-09-2015, 10:07 PM	#5
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,504	Re: What a neat truck! Looks like a k/20 to me. Blue dial spicers at least suggest that it's got a 3/4 ton front axle as well as an eaton rear. Looks like an 8' step side to me but the pictures aren't the best either. __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s

09-10-2015, 02:54 AM	#6
mike16 Registered User Join Date: Dec 2009 Location: bisbee, arizona Posts: 1,529	Re: What a neat truck! alot of literature printed in the past has stated that the 4 wheel drive was an option on c20's. Unless I'm mistaken.... K20 were a separate model. This seller may be relying on inaccurate information for it.

09-10-2015, 09:57 AM	#7
wreckedchevy Registered User Join Date: Jun 2013 Location: billings, mt Posts: 703	Re: What a neat truck! that is a nice find! __________________ 1969 Chevy C10 2wd stepside longbox



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.