AZ WTB. th400 mount spacers (see pic) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**yote1234** · 07-07-2014, 06:10 PM

Looking for two factory turbo 400 transmission spacers. as factory for 402/400 combo. see pic thx,dave

cheyenne shortstep · 07-08-2014, 03:46 PM

Educate me please. Are these trans to crossmember spacers? If so I may have one on one of the 2 TH400 parts trucks I just got.

**yote1234** · 07-08-2014, 03:55 PM

Quote:

Originally Posted by cheyenne shortstep

Educate me please. Are these trans to crossmember spacers? If so I may have one on one of the 2 TH400 parts trucks I just got.

yes sir! two spacers were between the transmission and the trans mount on the 402/400 combo. dave

cheyenne shortstep · 07-08-2014, 04:04 PM

You learn something new everyday thanks. I'll check after lunch.

**yote1234** · 07-08-2014, 05:29 PM

Quote:

Originally Posted by cheyenne shortstep

You learn something new everyday thanks. I'll check after lunch.

I thank you !! dave

cheyenne shortstep · 07-09-2014, 12:56 AM

Sorry Dave none here.

**68 Four on the Floor** · 07-09-2014, 01:04 AM

You could probably have them made relatively cheap and any shop. If it was August I'd make em for.you at school.

**yote1234** · 07-09-2014, 12:19 PM

Quote:

Originally Posted by cheyenne shortstep

Sorry Dave none here.

I thank you for looking! thx,dave

Quote:

Originally Posted by 68 Four on the Floor

You could probably have them made relatively cheap and any shop. If it was August I'd make em for.you at school.

yes, I will as last resort, but wanting to keep it all factory. thx for reply. dave

bluek5 · 07-10-2014, 08:30 PM

Dave,
I was at the pick-n-pull today looking at a 67 with a th400. I pulled the shim thinking of you. It is not quite the same as the one you have pictured. The corners are square not 45 like the one in the picture. It has three letters stamped in it ACC or something I can't remember. Let me know if you are interested I will get a picture of it.
Paul

**yote1234** · 07-10-2014, 08:38 PM

Quote:

Originally Posted by bluek5

Dave,
I was at the pick-n-pull today looking at a 67 with a th400. I pulled the shim thinking of you. It is not quite the same as the one you have pictured. The corners are square not 45 like the one in the picture. It has three letters stamped in it ACC or something I can't remember. Let me know if you are interested I will get a picture of it.
Paul

***people like you make this site #1 !!
please send me a pic. thx,dave

72MARIO · 07-10-2014, 11:08 PM

I am sure I have one in my tool box. I will look Monday. shoot me a pm to remind me if you still cant locate one in the US

bluek5 · 07-10-2014, 11:52 PM

Pictures

**70STOVEBOLT** · 07-11-2014, 10:13 AM

Are these shims necessary for a big block application? I am switching from a 250 to a 402.

Thanks,
Mark

**yote1234** · 07-11-2014, 11:13 AM

Quote:

Originally Posted by bluek5

Pictures

yes! that's one of the spacers I need. pm me with your price if you are selling it? thx,dave

Quote:

Originally Posted by 70STOVEBOLT

Are these shims necessary for a big block application? I am switching from a 250 to a 402.

Thanks,
Mark

yes, they came with the 402/400 combo.

**70STOVEBOLT** · 07-11-2014, 11:16 AM

Sorry for the questions. Does it require 2 or "as necessary"? I presume they are to level the engine and trans?

**yote1234** · 07-11-2014, 11:31 AM

Quote:

Originally Posted by 70STOVEBOLT

Sorry for the questions. Does it require 2 or "as necessary"? I presume they are to level the engine and trans?

according to the assembly manual they require 2. but I have read here that 2 might be too much? so? hope that helps. dave

**70STOVEBOLT** · 07-11-2014, 11:43 AM

Dave, thanks for the info.

**yote1234** · 07-11-2014, 12:20 PM

Quote:

Originally Posted by 70STOVEBOLT

Dave, thanks for the info.

very welcome. good luck with your conversion, dave

bluek5 · 07-11-2014, 01:36 PM

Dave,
You can have it for the price of shipping and $1 to cover my entrance fee. Send me your address and I will send it to you.
Paul

**yote1234** · 07-11-2014, 04:08 PM

Quote:

Originally Posted by bluek5

Dave,
You can have it for the price of shipping and $1 to cover my entrance fee. Send me your address and I will send it to you.
Paul

pm me with paypal. thx,dave

**Hart_Rod** · 07-12-2014, 09:17 AM

I think I might a couple also. I'll look when I get home tomorrow.

**yote1234** · 07-12-2014, 10:17 AM

Quote:

Originally Posted by Hart_Rod

I think I might a couple also. I'll look when I get home tomorrow.

awesome!! could use one more! thx buddy

**70STOVEBOLT** · 09-14-2015, 12:04 PM

Sorry to dig up an old thread. I have another question. Got the 402 in and now I have a leak at the rear of the transmission pan that I did not have before. Could it be because these spacers are missing, and the trans is sloping down to the rear too much? It is definitely coming from the pan gasket and not the output seal. Thanks in advance for any help/advice you can give me.

Thanks,
Mark

**Rods** · 09-14-2015, 04:21 PM

Dave I have both of them and I'm in phx I will pm you my info

07-08-2014, 03:46 PM	#2
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: WTB. th400 mount spacers (see pic) Educate me please. Are these trans to crossmember spacers? If so I may have one on one of the 2 TH400 parts trucks I just got.

07-08-2014, 04:04 PM	#4
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: WTB. th400 mount spacers (see pic) You learn something new everyday thanks. I'll check after lunch.

07-09-2014, 12:56 AM	#6
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: WTB. th400 mount spacers (see pic) Sorry Dave none here.

07-09-2014, 01:04 AM	#7
68 Four on the Floor Senior Member Join Date: Jun 2011 Location: Washburn, IA Posts: 600	Re: WTB. th400 mount spacers (see pic) You could probably have them made relatively cheap and any shop. If it was August I'd make em for.you at school.

07-10-2014, 08:30 PM	#9
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: WTB. th400 mount spacers (see pic) Dave, I was at the pick-n-pull today looking at a 67 with a th400. I pulled the shim thinking of you. It is not quite the same as the one you have pictured. The corners are square not 45 like the one in the picture. It has three letters stamped in it ACC or something I can't remember. Let me know if you are interested I will get a picture of it. Paul

07-07-2014, 06:10 PM	#1
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,406	WTB. th400 mount spacers (see pic) Looking for two factory turbo 400 transmission spacers. as factory for 402/400 combo. see pic thx,dave Attached Images __________________ 1971 K5 CST Blazer 1965 Chevelle Malibu 283 (sadly sold) 1968 Camaro 327 1968 Honda mini-trail z50a #377 1966 uh 1-D Huey

07-10-2014, 11:08 PM	#11
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,051	Re: WTB. th400 mount spacers (see pic) I am sure I have one in my tool box. I will look Monday. shoot me a pm to remind me if you still cant locate one in the US __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

07-10-2014, 11:52 PM	#12
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: WTB. th400 mount spacers (see pic) Pictures Attached Images

07-11-2014, 10:13 AM	#13
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: WTB. th400 mount spacers (see pic) Are these shims necessary for a big block application? I am switching from a 250 to a 402. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

07-11-2014, 11:16 AM	#15
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: WTB. th400 mount spacers (see pic) Sorry for the questions. Does it require 2 or "as necessary"? I presume they are to level the engine and trans? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

07-11-2014, 11:43 AM	#17
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: WTB. th400 mount spacers (see pic) Dave, thanks for the info. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

07-11-2014, 01:36 PM	#19
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: WTB. th400 mount spacers (see pic) Dave, You can have it for the price of shipping and $1 to cover my entrance fee. Send me your address and I will send it to you. Paul

07-12-2014, 09:17 AM	#21
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: WTB. th400 mount spacers (see pic) I think I might a couple also. I'll look when I get home tomorrow. __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

09-14-2015, 12:04 PM	#23
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: WTB. th400 mount spacers (see pic) Sorry to dig up an old thread. I have another question. Got the 402 in and now I have a leak at the rear of the transmission pan that I did not have before. Could it be because these spacers are missing, and the trans is sloping down to the rear too much? It is definitely coming from the pan gasket and not the output seal. Thanks in advance for any help/advice you can give me. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

09-14-2015, 04:21 PM	#24
Rods Senior Member Join Date: Aug 2014 Location: Arizona Posts: 1,485	Re: WTB. th400 mount spacers (see pic) Dave I have both of them and I'm in phx I will pm you my info



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.