Are the arms all the same on 67-72's? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

davidh · 02-19-2004, 01:23 PM

I'm looking at changing out the front spindles and rebuilding the front end on my 68. I have a complete 72 front end I have disassembled. Can I use the original a arms or not? Did they change once they went to 71? And are 1/2 ton and 3/4 ton's the same?

SWEET7T · 02-19-2004, 01:32 PM

The lower ball joints are different on the 71-72 than on the 67-70. Since you have the 'whole' front end, why not just swap all of the arms...

davidh · 02-19-2004, 01:34 PM

okay but in the future on other trucks could I use the same a arms and just change out the spindles or not??

02-19-2004, 01:23 PM	#1
davidh Senior Member Join Date: Feb 2004 Location: Ponca city now kingfisher Oklahoma Posts: 1,221	Are the arms all the same on 67-72's? I'm looking at changing out the front spindles and rebuilding the front end on my 68. I have a complete 72 front end I have disassembled. Can I use the original a arms or not? Did they change once they went to 71? And are 1/2 ton and 3/4 ton's the same?

02-19-2004, 01:32 PM	#2
SWEET7T Try spinnin 4 rear tars Join Date: Sep 2003 Location: Salt Lake City, Utah Posts: 757	The lower ball joints are different on the 71-72 than on the 67-70. Since you have the 'whole' front end, why not just swap all of the arms... __________________ SWEET7T 1970 C10, 2wd, LB, 307/TH350/3.08. PS, PB

02-19-2004, 01:34 PM	#3
davidh Senior Member Join Date: Feb 2004 Location: Ponca city now kingfisher Oklahoma Posts: 1,221	okay but in the future on other trucks could I use the same a arms and just change out the spindles or not??



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.